Microplate Reader Reader MR-9602

Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included For (more)mats Accepted 96-Well, 384-Well Flat Bottom Plates, Cuvettes Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm, 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates as well as cuvettes - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader with Cuvette Port (Model MR9611) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9611 is designed for efficient processing of multiple samples and accepts standard 96 well plates, 384 well plates, as well as cuvettes for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5°C up to 45°C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9611 SmartReader Microplate Reader UV-Vis with Cuvette Port & PC Software Included includes: - SmartReader PC Software for MR9611 - Cuvette Port - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Vortem 1550 Shaking Incubator LABNET New equipment (never used) Complete with racks for 50 mL and 15 (more) mL tubes, 230V Temperature Range: Ambient +5° to 99°C Temperature Accuracy: ±0.5°C Speed Range: 200 to 900 rpm Motion, Orbit: Circular, 3mm Timer 1 to 99 min or continuous Capacity: 18 x 15 mL tubes or 8 x 50 mL tubes Dimensions: 10.2 x 12.2 x 12.2 in. (26 x 31 x 31 cm) Electrical: 230V~, 50 Hz

Laboratory tap with gas base Straight wall feeder with base For technical gases, inert gases (nitrog (more)en), air (no burning gases).

Yamato SM-520 Large Capacity Sterilizer with Dryer 50L, 100-120V Operating Temperature Sterilization (more) 105°C to 135°C Operating Temperature Drying 135°C to 150°C Internal Capacity 50L Features - Interactive keypad input allows committing sterilization settings to memory - 7″ interactive touch screen - Suitable for protein modification at the maximum operating temperature of 135°C - Easy settings and operation modes for a multitude of sterilization process - Increased safety and function list including forced cooling and memory functions - Equipped with multiple safety locking mechanism for the lid - Comes with large capacity (11L) heat resistant stainless steel container - Alarm buzzer sounds when high or low pressure error occurs Large capacity, high performance, fully automatic 50L steam sterilization from start to finish with high pressure steam sterilization and drying steps. Interactive keypad input (touch panel) allows committing sterilization settings (time & temperature) to memory 7″ interactive touch screen Suitable for protein modification at the maximum operating temperature of 135°C. Easy settings and operation modes for a multitude of sterilization process. Increased safety and function list including forced cooling and memory functionsEquipped with multiple safety locking mechanism for the lid. Comes with large capacity (11L) heat resistant stainless steel container. Alarm buzzer sounds when high or low pressure error occurs. Sterilizing temp. range 105 to 135°C. Drying temp range 135 to 150°C. INCLUDED: The Yamato SM-520 Large Capacity Sterilizer with Dryer 50L, 100-120V includes: - 2 pcs. stainless steel mesh basket (⌀344 x D200 mm) - Drain board x 1, drain bottle x 1, chemical indicator 1 set, filter x 1, droplet tray x 1 - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036150440 Single-Channel Pump Head SP Standard, 2.5mm Features: - Recommended for standard  (more)applications - Convex rollers do not squeeze or crush organic cell cultures - Pump head features ball bearings - Rollers made of stainless steel and polyamide - For tubes with a 2.5-mm wall thickness (wt) - Depending on drive and tubing, the flow rate ranges from 2.0 to 4,151 ml per minute Click Here to View Product Video INCLUDED: The Heidolph 036150440 Single-Channel Pump Head SP Standard, 2.5mm includes: - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW