Molecular Devices Aquamax 2000 Microplate Washer

BioTek ELx50 Microplate Washer This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up but has not been tested further. The PSU is included. It is in good cosmetic condition with minor marks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

Manifold Type: 96-well washing, 8-channel dispense/aspiration (1 x 8) Washing Speed: ≤130 seconds (3 (more)-cycle wash, 300 μL/well, 1 x 8) Wash Cycles: 1 – 10 Volume Range: 25 – 3000 μL/well Dispense Precision: ≤ 3% CV Residual Volume: ≤ 2 μL/well Soak Time: 1 – 600 seconds Shaking: User-programmable speeds and timing Dimensions (DxWxH): 406 x 356 x 165 mm Weight: 9.8 kg

This LabTech LT-3500 Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and runs through the cleaning cycles, though they cannot be completed without the cleaning bottles. It was not tested further. It is in reasonably good cosmetic condition but the screen is slightly damaged. It is still responsive and mostly readable though.

Ohaus a-AP30TURH-B Turbidimeter Turbidity Measuring Range 0 to 1,000 NTU Turbidity Accuracy ≤0.3 NT (more)U; ±8%, whichever is greater Turbidity Detection Limit 0.1 NTU Features - Combines nephelometric and transmitted methods for ISO 7027 and EPA method 180.1 compliance - Dual optic paths and NIR light sources eliminate color interference and stray light - Water-resistant design with long battery life and 5,000 measurement storage - Wide measurement range from 0 to 200 NTU with 0.01 NTU detection limit - Graphic OLED display for clear, real-time data visualization - Light-touch keyboard for easy operation in field conditions - Built-in micro-USB port for efficient data transfer without additional software - Compact and lightweight design for portability in field applications - Easy Measurement for a Range of Applications from Drinking Water toWastewater The Ohaus a-AP30TURH-B Turbidimeter is a versatile and precise instrument designed for high-range turbidity measurements, meeting ISO 7027 and EPA method 180.1 compliance standards. By combining nephelometric and transmitted methods, this standalone device ensures exceptional accuracy with dual optic paths and NIR light sources, effectively reducing color interference and stray light for reliable results across a wide range of applications. Built with field applications in mind, the a-AP30TURH-B offers a durable, water-resistant design and compact construction, making it highly portable and easy to use in challenging environments. Its graphic OLED display provides clear, real-time data visualization, and the light-touch keyboard ensures simple and intuitive operation. The device is powered by 4 AAA batteries for extended use and includes a built-in micro-USB port for quick and seamless data transfer, eliminating the need for additional software. This model is designed for users who require only the turbidimeter itself, without any additional accessories or components. With an extended measurement range of 0 to 1,000 NTU, a detection limit of 0.1 NTU, and the capability for up to 8-point calibration, the a-AP30TURH-B delivers high-performance functionality in a streamlined, standalone package, ideal for professionals seeking reliable and efficient turbidity analysis. INCLUDED: The Ohaus a-AP30TURH-B Turbidimeter includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Leica Reichert Ultracut S Microtome &amp; Controller was removed from a university lab where it (more) was surplus to requirements. The unit powers up and is in good working order. The lights work, and the microtome itself is mechanically sound. Leica Reichert Ultracut SType - 702501SN - 420699 StereoZoom 6Zoom Range 0.67X - 4.0X 2 x Eye Pieces 15X W.F. Stereo (31-05-62) ControllerType - 654901SN - 89465

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.

IKA I-MAG Industry stirrer Speed Range 100 - 1500 RPM Stirring quantity max. per stirring position ( (more)H2O) 300 l Setting accuracy speed 10 rpm Features - Drive with very high IP protection class 64: unrestricted use even under harsh environmental conditions thanks to enclosed stainless steel housing - Electronically controlled motor for very stable speeds even under load for reproducible results - Secure and ergonomic mounting of the controller directly on the vessel or with a stand rod using the I-MAG UHC universal holder (available as accessory) - Multilingual menu navigation I-MAG is a powerful yet compact magnetic stirrer for applications in laboratory and production environments. In combination with the I-MAG SP set-up frames for large vessels, which are available as accessories, up to 300 liters of water can be mixed efficiently. The wired operating unit (controller) ensures convenient handling and simple integration into e.g. process engineering systems. The robust drive unit (IP protection class 64) consists of the high-torque and wear-free motor and the magnetic coupling with high-performance neodymium magnets. This enables the effective mixing of viscous media as well as mixing in vessels with a larger distance between the installation surface and the stirring rod (e.g. double-walled containers or vessels with insulated bottoms). In order to reliably achieve high speeds even under difficult conditions, I-MAG has an adjustable start-up speed that prevents the magnetic stirring bar from breaking off during the acceleration phase. Process reliability is additionally achieved by the integrated detection of the magnetic stirring bar coupling. In the event of a tear-off or failure of the magnetic coupling, the user is informed via the operating unit. The I-MAG controller has a variety of digital and analog interfaces. Equipped in this way, the device can, for example, be controlled with a foot switch or operating button or can be integrated into a network via USB/LAN/WIFI. With appropriate software (for example labworldsoft® 6), I-MAG can thus be integrated into an automated plant process.INCLUDED: The IKA I-MAG Industry stirrer includes: - I-MAG Industry stirrer - IKAFLON 90 slide (1 pc.) - USB A-B Cable - Adapter for analog interface (3 pcs.) - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Crest P2600HT-45 Digital Ultrasonic CleanerFeatures - Ceramically enhanced transducer technology wit (more)h industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P2600HT-45 Digital Ultrasonic Cleaner is a high-performance cleaning unit designed to deliver exceptional results. Operating at an ultrasonic frequency of approximately 45 kHz, it features ceramically enhanced transducer technology with industrial bonded assembly to ensure a homogenous sound field and effective energy distribution. The unit is equipped with a digital control and display, allowing precise adjustment of the cleaning time from 1 to 99 minutes, or continuous operation. The integrated heater allows the liquid temperature to be adjusted in 1K increments up to 80°C. The deep-drawn stainless steel cleaning tank, with rounded corners, facilitates easy maintenance, while the intrinsically safe heater includes dry-run protection for safe operation. With a substantial tank capacity of 7 gallons (26.1 liters) and an average ultrasonic power of 300 watts, this cleaner is ideal for extensive cleaning applications. Additionally, it includes a drain valve assembly for tanks with capacities of 2.5 gallons or more, enhancing usability and efficiency. INCLUDED: The Crest P2600HT-45 Digital Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Accuris P7700-10 NextPette Variable Volume Pipette, 0.5 to 10ul Inaccuracy ± 3.8 to 0.5% Imprecision (more) ± 4 to 0.5% Compatible Tip Size 10ul Features - Market leading accuracy &amp; precision - One handed volume adjustment - Convenient volume lock - Easily visible, 4 digit display - Ergonomic, thumb shaped plunger button The NextPette development project started with feedback from a wide range of researchers and technicians. The Accuris engineering team then set their sites on creating an ultra-lightweight, and ergonomic pipettor without any sacrifice in terms of durability, accuracy and precision. The NextPette incorporates many significant features and advantages truly appreciated by today's research laboratories.The easily accessible volume adjustment system reduces the time and inconvenience associated with volume selection. The uniquely positioned volume dial is located above the pipette handle, allowing for easy one handed adjustment with the user's thumb. The volume display is located on the side of the pipettor that faces the user. Unlike traditional pipettors, the NextPette does not require a second hand to rotate the pipettor 180° to observe the display.The NextPette also features an innovative, asymmetrical designed plunger button that can be rotated to match the comfort preference of the user. This button is freely adjustable to rotate continuously between wide setting, resulting in the more traditional feel of a round, larger diameter plunger button, or to a more narrow (thumb shaped) contour preferred by the majority of researchers.The NextPette's materials and components were carefully selected to minimize weight and ensure durability and a long service life. Internal components include precision plungers made of stainless steel (1ul, 10ul, 5000, and 10,000µl models) or ceramic (20ul, 200ul, and 1000ul models) and all use durable PTFE seals. The pipettors have also been designed with service in mind. They are easy to disassemble, and seals are easy to replace. Silicone lubricant is included with each pipettor. Recalibration can be done in the lab - no tools are required and the instruction manual includes full details on how to properly check pipetting accuracy and how to recalibrate if necessary. The entire pipettor is autoclavable at 121°C and resistant to UV exposure. All pipettes are factory calibrated in accordance with ISO 8655 standards and include a factory calibration certificate. INCLUDED: The Accuris P7700-10 NextPette Variable Volume Pipette, 0.5 to 10ul includes: - Calibration Certificate - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty