Labsystems Microplate Washer Autowash I

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

2x Plate washer uWasher DG-34 Grifols (One in good condition, 1 for parts)

This LabTech LT-3500 Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and runs through the cleaning cycles, though they cannot be completed without the cleaning bottles. It was not tested further. It is in reasonably good cosmetic condition but the screen is slightly damaged. It is still responsive and mostly readable though.

This Tecan HydroFlex Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up but we were unable to test it further at our facility. It is in excellent cosmetic condition with only minor marks from use. It comes in the original packaging box with the following:-Tecan HydroControl PC Package V2.2 (Part no. 30037229) (The software is on this disc).Tecan HydroControl Instructions for use (Part no. 30026398)Tecan HydroFlex Instructions for use (Part no. 30026397)3 x Waste Bottles (Green lids are 2.5L)

This Tecan HydroFlex Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up but we were unable to test it further at our facility. It is in excellent cosmetic condition with only minor marks from use. Includes:-HydroFlex Manual-HydroFlex software Manual -1x Waste Bottle

Ohaus a-AP30TURH-B Turbidimeter Turbidity Measuring Range 0 to 1,000 NTU Turbidity Accuracy ≤0.3 NT (more)U; ±8%, whichever is greater Turbidity Detection Limit 0.1 NTU Features - Combines nephelometric and transmitted methods for ISO 7027 and EPA method 180.1 compliance - Dual optic paths and NIR light sources eliminate color interference and stray light - Water-resistant design with long battery life and 5,000 measurement storage - Wide measurement range from 0 to 200 NTU with 0.01 NTU detection limit - Graphic OLED display for clear, real-time data visualization - Light-touch keyboard for easy operation in field conditions - Built-in micro-USB port for efficient data transfer without additional software - Compact and lightweight design for portability in field applications - Easy Measurement for a Range of Applications from Drinking Water toWastewater The Ohaus a-AP30TURH-B Turbidimeter is a versatile and precise instrument designed for high-range turbidity measurements, meeting ISO 7027 and EPA method 180.1 compliance standards. By combining nephelometric and transmitted methods, this standalone device ensures exceptional accuracy with dual optic paths and NIR light sources, effectively reducing color interference and stray light for reliable results across a wide range of applications. Built with field applications in mind, the a-AP30TURH-B offers a durable, water-resistant design and compact construction, making it highly portable and easy to use in challenging environments. Its graphic OLED display provides clear, real-time data visualization, and the light-touch keyboard ensures simple and intuitive operation. The device is powered by 4 AAA batteries for extended use and includes a built-in micro-USB port for quick and seamless data transfer, eliminating the need for additional software. This model is designed for users who require only the turbidimeter itself, without any additional accessories or components. With an extended measurement range of 0 to 1,000 NTU, a detection limit of 0.1 NTU, and the capability for up to 8-point calibration, the a-AP30TURH-B delivers high-performance functionality in a streamlined, standalone package, ideal for professionals seeking reliable and efficient turbidity analysis. INCLUDED: The Ohaus a-AP30TURH-B Turbidimeter includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Olympus U-ULH Fluorescence Light Source with BH2-RFL-T3 Power Supply Functional lamp with 160 hours  (more)of use For IX Series (Ax - Bx)

Explosion-proof laboratory freezer with plastic drawers Dimensions (WxDxH): 597 x 615 x 820 mm Capac (more)ity: 129 l Temperature range: -9°C to -26°C

Yamato WH-201C Auto Pure High Capacity Di Type 2 &amp; Type 3 Water Purification System, 120V Flow R (more)ate 0.5 gpm / 1.9 lpm Resistivity Light 200 KΩ Total Capacity Grains As CaCO₃ 1800 Features - Turn-key system for low cost – on demand service - Resistivity light included for visual indication of cartridge replacement - Available in high purity and high capacity configurations - Available in 2-1/2″ and 4/1/2″ diameter configurations - Outlet isolation valve, spanner wrench and associated tubing provided - Economically produces DI water High Capacity DI System - 2-1/2" Diameter (10" Carbon, (2) 20" High Capacity DI, &amp; 20 K DI Light). Type 2 and 3 water quality. High capacity models WH201C and WH501C: provide water quality better than 50 kΩ, for less corrosive applications, ideal for scale reduction and non-stainless steel piping systems. Typically used with environmental chambers, sterilizers, ultrasonic cleaners, and chiller loops. INCLUDED: The Yamato WH-201C Auto Pure High Capacity Di Type 2 &amp; Type 3 Water Purification System, 120V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex Fixed Angle Rotor 50mL x 6 The Scilogex Fixed Angle Rotor 50mL x 6 is a high-performance ro (more)tor designed to meet the demanding requirements of clinical and research laboratories. With a maximum speed of 6,000 RPM and maximum RCF of 4,020 x g, this rotor delivers fast and efficient centrifugation of samples up to 50ml. It is capable of accommodating up to 6 tubes of 50ml capacity, making it ideal for processing large volumes of samples in a single run. This rotor is compatible with the Scilogex DM0636 Multi-Purpose Clinical Centrifuge, a reliable and versatile centrifuge system that offers precise control and consistent performance. INCLUDED: The Scilogex Fixed Angle Rotor 50mL x 6 includes: - Rotor Lid - Manufacturer's Documentation - 2 Year Manufacturer's Warranty