BioTek ELx50 ELX8FMW MTP Microplate Washer Mikroplatten Wascher ELISA

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labsystems Microplate Washer Autowash I Labsystems Cellwash 96 well microplate washer system complet (more)e with vacuum pump and bottles Semi-automatic system Labsystems Cellwash is designed for washing the contents of 96-well plates in a high-throughput manner, reducing the washing time of one plate to a few seconds.

The SkanWasher 300 is an automatic 96-well microplate washer designed to give reliable, reproducible (more) results, with no cross-contamination between wells, and no carryover from plate to plate. The washer incorporates flexible software, and can handle most requirements for kit manufacturers, and research and clinical scientists. The SkanWasher 300 has eight user-defined programs, two inlets for buffer and rinse, and a special rinse program. The fluid pressure can be adjusted individually for each program, making it suitable for very gentle washing, as well as tougher, more turbulent washing. Washes all 96 wells simultaneously 8 user defined programs with 16 steps per program. Wash steps set by either time or volume (100 – 1000 ml) Versatile dispense-only function provides < 4% CV dispense accuracy and precision across the plate Easy to maintian: preset factory rinse program and removable wash head Wash head & manifold combined in one module, thereby reducing risk of contaminant growth Unique double probe washing system provides maximum washing efficiency with minimal reagent consumption Aspirate from top of liquids to avoid cross-contamination of wells Easily-accessible wash head channels for easy cleaning Motorized plate carriage, adjustable for flat & round bottomed plates Quick-disconnect fittings to avoid spills Capacity: 96-well Microplates Soak Time: Programmable to 3 Minutes Dimensions (WxDxH): 660 x 330 x 610 mm

This Tecan HydroFlex Microplate Washer was removed from a university lab where it was surplus to req (more)uirements. The unit powers up but we were unable to test it further at our facility. It is in excellent cosmetic condition with only minor marks from use. It comes in the original packaging box with the following:-Tecan HydroControl PC Package V2.2 (Part no. 30037229) (The software is on this disc).Tecan HydroControl Instructions for use (Part no. 30026398)Tecan HydroFlex Instructions for use (Part no. 30026397)3 x Waste Bottles (Green lids are 2.5L)

This Biotrak ll Plate Washer 4 was removed from a university lab where it was surplus to requirement (more)s. The item powers on and is in good cosmetic condition, we are unable to test it further at our facility.

Accuris SmartWasher 96 Microplate Washer, 115VThe Accuris SmartWasher™ 96 automates the process of E (more)LISA plate washing so assays can be prepared quickly, accurately, and with confidence for absorbance reading. It’s the perfect companion to our popular SmartReader™ 96 microplate reader. - Precision control of aspiration needle position - Accurate to 0.1mm - Minimal residual liquid, ≤1μl/well - Auto rinse function eliminates cross contamination - Up to 100 wash protocols can be customized and stored - Liquid level sensors in wash and waste bottles - Wash protocols can be transferred via flash drive Research requires flexibility – the SmartWasher™ 96 provides it. Full plates, partial plates, and strips with U, V, C, or flat bottoms are accepted by this fully automated washer. Multiple aspiration point settings allow for minimal residual liquid in the wells after aspiration. All parameters, including dispense volume, suction time, soak and shake cycles, and shaking speed are easily programmed using the large 4.3” LCD display and keypad. Up to 100 wash protocols can be stored on board the SmartWasher™ 96 and recalled when needed, or transferred between machines with a flash drive. The washer comes equipped with 2 wash bottles, 1 rinse bottle and a waste bottle. All have sensors that alert the user when the solutions are low, or in the case of the waste bottle, when it needs to be emptied. An auto-rinse function primes the dispensing tube and wash heads to prevent cross contamination and clogs. 8- and 12-channel manifolds are available separately to accommodate plates in either orientation. A transparent, acrylic shield surrounds the wash area, allowing for visualization of the plate. Should a spill or leak occur, the beveled spill well ensures that the liquid is extracted immediately to avoid cross-contamination. The SmartWasher™ 96 is the perfect partner for the SmartReader™ 96 Microplate Absorbance Reader as well as other popular readers. 8- and 12-channel manifolds, purchased separately, are available to accommodate different plate orientations. Click Here to View Product Video INCLUDED: The Accuris SmartWasher 96 Microplate Washer includes: - Waste and Buffer Bottles - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Temperature control range: -5°C to 99°C Usable temperature range: from 30°C below room temperature t (more)o 99°C Temperature accuracy for 0°C: ±1.0°C 37°C: ±0.5°C 90°C: 1.0°C Heating rate: 5°C/min Cooling rate simple temperature operation: 6.0°C/min between 99°C and 25°C 1.5°C/min between 25°C and -5°C Temperature deviation across blocks: Max 0.2°C Dimensions (WxDxH): 220 x 250 x 125 mm Weight: 5 kg

This Jouan B4i Benchtop Centrifuge was removed from a university lab where it was surplus to require (more)ments. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. This item includes the following rotor: Thermo Jouan High Throughput Swing-Out Rotor Model S40Max Load 2.00kgMax speed 4300 (rpm) This item ran at 4000rpm with S40 Rotor fitted.As stated in the manual, the maximum speed for a swing-out rotor on this unit is 4000 rpm.

This Jouan VXS 570 Laboratory Deep Freezer was removed from a university lab where it was surplus to (more) requirements. The unit powers up and was tested with a digital thermometer. It did reach -84˚C but after opening the door for the probe our thermometer measured -76˚C. The unit is in very good condition but would benefit frmo new door seal due to splits in the top. There is no key for the lock but it is unlocked.