LabNet Accuseal Semi-Automated Plate Heat-Sealer Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a New Brunswick Innova U535 Ultra-Low Temp Freezer. The unit is in full working (more) condition and is ready for immediate release. The New Brunswick Innova U535 Ultra-Low Temperature Freezer is a high-performance laboratory freezer designed for storing sensitive medical and scientific materials at extremely low temperatures. Key features include: Ultimate Low Temperature: -86°C, ensuring precise temperature control and protection of samples from temperature-spiking damage Vacuum Insulation Panel Technology: Provides excellent space and power efficiency, allowing for up to 30% more storage capacity compared to traditionally-insulated lab freezers Cascade Refrigeration: Ensures consistent and reliable temperature performance. 3 Inner Compartments: Allow for organized storage and easy sample retrieval Manual Defrost or Automatic Defrost Options: Cater to different laboratory needs and preferences Technical Specifications Overall capacity: 18.98 cubic feet Power supply: 208/220V/60Hz Dimensions: External height: 1950mm External width: 800mm External depth: 867mm

MVE Cryo-Shipper Mini 5.9Ltr with ShipsLog 3 Temperature Data Logger Lab This item was removed from  (more)a university where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Neck Opening in (mm): 8.50 (216.0)Overall Height in (mm): 20.0 (508)Outside Diameter in (mm): 11.60 (295) This item includes the following: ShipsLog 3 Temperature data logger.

New Brunswick Scientific U570-86 Ultra Low Temperature Freezer Lab This item was removed from a univ (more)ersity laboratory where it was surplus to requirements. The item powers on and is in a reasonable used cosmetic condition.It includes 4 shelves but has only 4 pegs, so only one shelf can be fitted currently. There are only two doors at the bottom. During testing, the freezer was set to its minium temperature of -86ºc, but would not drop below -19ºc.Therefore, it is listed as Spares/Repair and no further testing was conducted. Specifications:- Model: U570 -86 - Serial No.: 1004-5204-1103

This Sanyo MDF-U73V Ultra Low Temperature Freezer was removed from a university lab where it was sur (more)plus to requirements. This item is in good cosmetic condition both internally and externally. When the freezer is turned on, an alarm will sound indicating an error that hinders its cooling function. This issue may be caused by a defective compressor, which is why the product is sold as Spares/Repairs.

Ohaus PX225D Pioneer Semi-Micro Analytical BalanceThe OhausPX225D Pioneer PX Analytical Balance comb (more)ines essential weighing functionalitywith competitive performance, offering high accuracy and repeatability forapplications in laboratory, industrial and education settings with internalcalibration. The PX225D's weighing plate has a maximum capacity of 82/220 gramswith a readability of 0.0001 grams and a weight stabilization time of 10 seconds.The PX225D is affordably priced, intuitively designed for intelligent operationwith a second line display for additional information, and USB and RS-232connectivity for easy communication. The PX offers high accuracy and repeatability for essential weighing applications in laboratory, industrial and education settings at an economical price point Featuring a cast metal lower housing, sub-pan and stainless steel weighing pan, the PX is durably constructed for versatile, long-term use The PX features a second line display for additional information or guidance Static removal bar for convenient grounding USB and RS-232 connectivity for easy communication Click Here to View Product Video INCLUDED: The Ohaus PX225D Pioneer Semi-Micro Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Perkin Elmer LS 55 Luminescence Spectrometer This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up and is in good cosmetic condition with marks from use. The lab reported that it was in good working order prior to removal, but we were unable to test it further at our facility.

This item has just arrived in our stock. Please enquire for further details.

IKA DB 3.2 Test Tube Combination Dry Block (1.5 ml / 15 ml / 50 ml)

Labconco CentriVap Cold Trap with stainless steel lid Brushed, Stainless Steel and Powder-Coated (more) Steel Exterior Illuminated Temperature Graph with Endpoint Indication (Operating temperature of -40° C) HCFC-Free Refrigerant System 1/3 hp Compressor (Reaches -50C in less than 30 min.) 4-liter, Stainless Steel Collector Acrylic or Stainless Steel Lid (with 2 Quick-Disconnect fittings for connection to a CentriVap Concentrator) Stainless Steel DrainPort (with corrosion-resistant, nylon valve INCLUDED: The Labconco 7811021 CentriVap Cold Trap with stainless steel lid, 115V, 60Hz includes: - Tubing - Clamps x 2 - Wire Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 9000520 WaterPro PS Polishing Station, 115V, 60HzFeatures - Timed dispense for unattended  (more)operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000520 WaterPro PS Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz