Agilent Technologies 2140-0590 Deuterium Lamp Lab

Job Lot of 34 Hollow Cathode Lamps This was removed from a university lab where it was surplus to re (more)quirements. These have all been tested by a manufacturer trained engineer using a Varian SpectrAA Atomic Absorption Spectrometer  Model - 220FS)) and these are the results for that (no further test have been done): Photron Hollow Cathode Lamp - Element: Na, Sodium (PN-P852) SN-4589.  Working Visimax I Hollow Cathode Lamp - Element: Zn (Cat no-62311). WorkingVisimax I Hollow Cathode Lamp - Element: Yb (Cat no-062983-00). Working Instrument Laboratory Hollow Cathode Lamp - Element: Chromium Cr. (Cat no-89211). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Cobalt, Co (Cat no-89212).   WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Selenium, Se (Cat no-89249). WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-89230). not WorkingInstrument Laboratory Hollow Cathode Lamp - Element: Maganese, Mn (Cat no-89231). Working Philips Data Coded Hollow Cathode Lamp - Element: Sn (PN-9423 390 30501) SN - 37957.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Ca-Mg (PN-9423 393 31011) SN - 38083.   Not testedPhilips Data Coded Hollow Cathode Lamp - Element: Hg (PN-9423 390 30801) SN - 37374.    WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Na (PN-9423 390 30111) SN - 28829.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Pb (PN-9423 390 30821) SN - 37759.  WorkingPhilips Data Coded Hollow Cathode Lamp - Element: Cd (PN-9423 390 30481) SN - 37280.   WorkingPhilips Data Coded Hollow Cathode Lamp - Element: D2 (PN-9423 390 30011) SN - 35732.   not tested Activon Hollow Cathode Lamp - Element: Calcium, Ca (SN-27775).       not WorkingActivon Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-6603).  WorkingActivon Hollow Cathode Lamp - Element: Titanium, Ti (SN-5998).  not tested Cathodeon Hollow Cathode Lamp - Element: Cr (PN-3UNX/Cr) SN - 39998.  WorkingCathodeon Hollow Cathode Lamp - Element: Ca (PN-3UNX/Ca) SN - 70591.  WorkingCathodeon Hollow Cathode Lamp - Element: Fe (PN-3QNY/Fe) SN - 40895.  Working SIP Analytical Hollow Cathode Lamp - Element: Cd (Cat no-FL2176) Lamp no.20065 NOT WORKINGSIP Analytical Hollow Cathode Lamp - Element: Pb (Cat no-FL2172) Lamp no.20008 WorkingSIP Analytical Hollow Cathode Lamp - Element: Ni (Cat no-FL2155) Lamp no.20081.  WorkingSIP Analytical Hollow Cathode Lamp - Element: H2 (Cat no-FL2159) Lamp no.20098. not tested S&J Juniper Hollow Cathode Lamp - Element: Magnesium, Mg (Cat no-4132) SN-517009. WorkingS&J Juniper Hollow Cathode Lamp - Element: Boron, B (SN-88541).   WorkingS&J Juniper Hollow Cathode Lamp - Element: Cadium, Cd (Cat no-4108) SN-514357.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Lead, Pb (Cat no-4129V) SN-2936V. WorkingS&J Juniper Hollow Cathode Lamp - Element: Aluminium (SN-88765).  WorkingS&J Juniper Hollow Cathode Lamp - Element: Copper, Cu (Cat no-4114V) SN-3325.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Cu/Zn (Cat no-4289V) SN-3144V.  WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (Cat no-4135) SN-513155.   WorkingS&J Juniper Hollow Cathode Lamp - Element: Molybdenum, Mo (SN-88612).  Working

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V Te (more)mperature Range Ambient +5°C to 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural and forced convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark MAGic Clamp Universal Platform The Benchmark MAGic Clamp universal platform for flasks &am (more)p; tube racks (11 x 9.5 in) is compatible with many Benchmark shakers. Click Here to View Product Video INCLUDED: The Benchmark MAGic Clamp Universal Platform includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Eppendorf A-2-DWP-AT Microplate Rotor & Buckets The Eppendorf A-2-DWP-AT Microplate Rotor &  (more)Buckets features two deepwell-plate buckets, which can each hold up to two plates for simultaneous processing of up to 192 samples. Reaches speeds of 4,500 RPM with a max RCF of 3,486 x g. This rotor can accommodate MTP, DWP, or filtration plate kits. The A-2-DWP-AT can only be used with Eppendorf centrifuge models 5810, or 5810R. INCLUDED: The Eppendorf Swing Bucket A-4-38 Rotor includes: - 2 Deep Well Plate Buckets - Full 1 Year Parts and Labor Warranty Eppendorf A-2-DWP-AT Microplate Rotor & Buckets SpecificationsMax Rotational Speed4,500 rpmMax RCF3,486 x gMax Capacity2 x 6 MTP; 2 x 2 DWP; 2 x 1 filtration plate kitsAutoclavable121°C for 20 minutesCompatibilityEppendorf 5810, and 5810R

Eppendorf 2 x 15ml Adapters, Cat. # 022637614 New in box Eppendorf 2 x 15ml Adapters, Cat. # 0226376 (more)14 for A-4-44 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 2 x 15ml Adapters, Cat. # 022637614 are used with the Eppendorf 5804/R Centrifuges. INCLUDED: The Eppendorf 2 x 15ml Adapters, Cat. # 022637614 includes: - Full 6 Month Parts and Labor Warranty

Boekel Scientific 260750 Mini Tube Rotator, Microtube and Conical bottom (115V/230V) The Boekel Scie (more)ntific Mini Tube Rotator is ideal for mixing laboratory tubes. Molecular Biology, Histochemistry and Clinical applications. Supplied with carousel for 36 x 1.5/2.0mL Tubes. Cold room and Incubator compatible. Features: - A Variable Speed with LCD display - Includes 260751 Carousel for 36 1.5/2.0ml tubes - Provides complete 360° Rotation - An adjustable 0-90° Mixing Angle - Small footprint for your bench – we know you need all the space you can get! - Interchangeable carousels for all common laboratory tubes - Cold Room and Incubator compatible INCLUDED: The Boekel Scientific 260750 Mini Tube Rotator, Microtube and Conical bottom (115V/230V) includes: - Carousel for 36 x 1.5/2.0mL Tubes - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty