Witeg SWUF-80

ECO G Lauda Series - Refrigerated Thermo-Cryostats LAUDA ECO G cryostats offer reliable technology a (more)nd modern design for temperature ranges from -50°C to 200°C depending on the models. Microprocessor management and integrated cooling system. Gold control heating head (TFT color graphic display and graphic illustration of temperature profiles), with 5 programs and 150 segments each, equipped with mini USB interface. These models offer the highest performance conveyed by the LAUDA SmartCool intelligent system, for maximum energy savings. The circulation pump can be adjusted to six levels and the comprehensive range of ECO devices offers cooling capacities from 180 to 700 watts. Examples of specific applications - Sample preparation in chemistry and pharmacy - Functional tests of electronic components - Bearing tests - Beer forcing test - Valve tests - Stress tests - Bending test - Expansion test - Semiconductors Notable features - PID microprocessor management - TFT graphic display with graphic representation of temperature profiles - Alphanumeric navigation menu - Overtemperature protection - Protection class III for operation also with flammable liquids - Pump adjustable to 6 levels - Front adjustment of the external/internal pump power without removing the control unit - USB interface - Possibility to upgrade with various interfaces - Possibility of upgrading with Pt100/LiBus for external control via console - Programmer with 150 segments for 5 programs - Integrated programmer with up to 20 segments - Standard pump connectors - Steel tub - Drain tap Graph of cooling performance of ECO Gold LAUDA cryostats. Performance graph of the pump pressing on the six levels.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Peak Scientific NitroGen N300DR Nitrogen Generator This item was removed from a university lab where (more) it was surplus to requirements. The unit is in good cosmetic condition with some light staining on the top panel. It powered on and initialised, but the compressor did not run, and a system fault was displayed after a few minutes. Therefore, it is listed as Spares/Repair.

PEAK Scientific PH600 Precision Hydrogen Generator This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up but we were unable to test it further. It is in good cosmetic condition with marks from use. It is sold for spares/repairs due to the nature of the instrument and that it is untested.

Texol Genysis NitroGenerator Nitrogen Generator This item was removed from a university lab where it (more) was surplus to requirements. The unit is in reasonably good cosmetic condition, with some stain marks on the top and side panels. It is mounted on four wheels and operates on a 24-volt power system, but no power adapter is supplied. When powered on, the front power light illuminated, and the programmer inside the front door displayed system information. No further testing could be carried out as the unit must be controlled by an external system. Power supply not included.

Thermo Neslab M75 Merlin Series Recirculating Cooler Lab This item was removed from a university whe (more)re it was surplus to requirement. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in very good cosmetic condition.

This listing is for a VWR VisiScope IT404 MicroscopeVisiScope IT 404 inverted microscope offers a co (more)mplete solution for your brightfield observations. The IT 404 inverted microscope is equipped with a full set of objectives that covers most standard applications. A mechanical stage is included along with 4 objectives (4x and 40x for brightfield; 10x and 20x for phase contrast).The light ring of the adjustable phase contrast slider is pre-centered when the microscope leaves the factory. It should therefore need no further adjustment. If a re-centering is needed, it can be performed via the two side bolts. The 4X/10X light ring must be used with 4X and 10X phasecontrast objectives, the 20x/40x light ring with the 20x and40x and the opening is used for bright field.The Moticam 5 is an attachable digital C-mount camera with CMOS-Sensor and it features a 5MP live resolution capability along with:- Live resolution: 5.0MP (2592x1944)- Optical calculation: 1/2,5"- Output: MiniUSB- Focusable lens: 12mm- 2 variable diameter eyepiece adapters- Macrotube for specimens observation- Motic Images Plus 2.0 for PC and MAC- Motic 4-dot calibration slideFeatures:- Ergonomic:Every control is easy to reach and every component has been designed with ease of use in mind. Focusing and specimen movement controls allow the wrists to rest on the bench. Light intensity adjustment is placed very close to the focusing knobs. The specimen stage is fitted with a special glass insert that allows you to see the objectives for immediate identification of the magnification set-up. An ergo head allows compensation for operator height.- Efficiency:Plan achromatic, infinity corrected optics, bright 8 W LED illuminator, phase contrastset, holders for specimen slides, flasks, Petri dishes, trinocular head for photo/ video applications. These are the features of IT 404, a powerful, complete and innovative instrument, designed to set a reference standard for routine and advanced tissue culture.- User comfort:The 22 mm extra widefield optics are pleasant to use minimising operator stress. The special eyepieces are designed for eyeglass wearers.- Objectives:Long working distance (LWD) infinity corrected (IOS) plan achromatic: 4x/0,10 (working distance 18 mm), phase contrast 10x/0,25 (working distance 10 mm), phase contrast 20x/0,40 (working distance 5,1 mm), 40x/0,60 (working distance 2,6 mm), corrected for 1,2 mm cover glass.

·       Triple Quad MS/MS ·       Ion Max ESI, APCI and APPI Source ·       Mass Range: m/z 30–1500  (more)·       H-SRM up to 0.2Da resolution ·       Fast positive/negative mode switching ≤ 25 ms ·       2 Edwards Rotatary vane Pumps ·       Xcalibur Data System ·       Surveyor HPLC included ·      Option: Other HPLC systems available

Thermo Scientific TSX2305SV Laboratory Refrigerator Lab This item was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in great cosmetic condition. Key included.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database

IKA Microstar 7.5 Control Overhead Stirrer Speed Range 0/30 to 2,000 RPM Viscosity Max. 4,000 mPas  (more)Stirring Quantity Max. 5 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 4,000 mPas and volume of up to 5 l - Continuously adjustable speed between 0/30 – 2,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemically resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:Click Here to View Product Video INCLUDED: The IKA Microstar 7.5 Control Overhead Stirrer includes: - MICROSTAR 7.5 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - Chuck Key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration IKA Microstar 7.5 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)5 lMotor rating input32 WMotor rating output22 WMotor principleBrushless DCSpeed displayLCDSpeed range0/30 - 2000 rpmViscosity max.4000 mPasOutput max. at stirring shaft15.7 WPermissible ON time100 %Torque max. at stirring shaft7.5 NcmSpeed controlTurning knob Setting accuracy speed1 ±rpm Deviation of speed measurement n 300rpm1 ±% Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000Temperature displayyesChuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.075 NmTorque measurementtrendDeviation of torque measurement I3 ±NcmTimeryesTimer displayLCDTime setting range0 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)60 x 173 x 136 mmWeight1.18 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input32 WDC Voltage24 VCurrent consumption1300 mAComparison of ModelsSpecificationsIKA Microstar 15 Control Overhead StirrerIKA Microstar 15 Digital Overhead StirrerIKA Microstar 30 Control Overhead StirrerIKA Microstar 30 Digital Overhead StirrerIKA Microstar 7.5 Control Overhead StirrerIKA Microstar 7.5 Digital Overhead StirrerStirring quantity max. (H2O)10 l10 l20 l20 l5 l5 lMotor rating input32 W32 W32 W32 W32 W32 WSpeed displayLCDLEDLCDLEDLCDLEDSpeed range0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpm0/30 - 2000 rpm0/50 - 2000 rpmViscosity max.8000 mPas8000 mPas20000 mPas20000 mPas4000 mPas4000 mPasTorque max. at stirring shaft15 Ncm15 Ncm30 Ncm30 Ncm7.5 Ncm7.5 NcmTime setting range0 - 6000 minN/A0 - 6000 minN/A0 - 6000 minN/ATemperature displayYesN/AYesN/AYesN/AUSB interfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(6) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote