Edwards EMF3 Oil Mist Filter NW10

Labconco Filter Paper, Package of 1000Fits into topof flask to prevent partial loss of product durin (more)g freeze drying. 1" diameter (28 mm). Pore size 17 microns.No complexfilter retainer neededINCLUDED: The Labconco 7544810 Filter Paper, Package of 1000 includes: - 1000 Labconco 7544810 Filter Papers - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FilterMate Portable Exhauster, Carbon Filter required (not included) One FilterMate is  (more)capable of exhausting 24 in., 36 in. and 48 in. wide enclosures (22 3/4 in.H models) Powder-coated steel exterior base and rubber feet Quiet, nonsparking, variable-speed, motorized impeller Negative pressure plenum to capture and refilter leaked fumes INCLUDED: The Labconco 3970001 FilterMate Portable Exhauster, Carbon Filter required (not included), 115V, 60Hz includes: - 8 Feet of 5" ID Gray Hosing - Two Clamps - 5" OD Upper Transition Adapter - Xpert Balance Enclosure - Protector XVS Ventilation Station - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Filter material PP DLW, 20um pore size, Pack of 10 The Hermle Filter material PP DLW, 20um po (more)re size, Pack of 10 is a type of filter material that is used with the Hermle SIEVA-3 Filtration Centrifuge. The filter material is made from polypropylene (PP), which is a synthetic polymer that is widely used for its durability, chemical resistance, and low cost. The DLW designation stands for "deep layer winding," which is a manufacturing technique that creates a filter material with a high filtration efficiency and a large filtration area. The Hermle Filter material PP DLW with 20um pore size is designed to remove particles and impurities from liquids, such as cell culture media, buffers, and reagents. The 20um pore size makes it suitable for filtration of particles of larger size. The pack of 10 filters provides an economical and convenient way to stock up on filters for routine laboratory use. INCLUDED: The Hermle Filter material PP DLW, 20um pore size, Pack of 10 includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

IKA Pette Vario 2 - 20ul Pipette Features - Improved ergonomics as a result of replaceable handles  (more)ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 2 - 20ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 2 - 20ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range2 - 20 µlIncrements0.02 µlAccuracy (Nominal Volume µl / %) ± 0.2 µl / 1%Precision (Nominal Volume µl / %)± 0.06 µl / 0.3%Accuracy (50% of Nominal Volume µl / %)± 0.12 µl / 1.2%Precision (50% of Nominal Volume µl / %)± 0.06 µl / 0.6%Accuracy (10% of Nominal Volume µl / %)± 0.1 µl / 5%Precision (10% of Nominal Volume µl / %)± 0.03 µl / 1.5%

The Ultravap Mistral from Porvair Sciences is designed to remove the traditional laboratory ‘bottlen (more)eck’ of solvent evaporation from microplates. Fully automating the dry-down step has always been impossible because it is difficult to interface liquid handling robots with traditional centrifugal-type evaporators. The Ultravap Mistral design, by dispensing with the rotating arm of the centrifuge and offering a fully-flat front profile, overcomes this problem and is much better positioned to link with your robot. With more than 20 years experience in producing deep well microplates, Porvair Sciences has thoroughly researched the problems of drying down organic solvents in plates. The Ultravap Mistral may be operated with a supply of clean, dry compressed air in place of nitrogen, if the chemistry allows. It has been designed in close co-operation with the leading suppliers of laboratory liquid handling robots and is suitable for integration directly with the following manufacturers robots:  Hamilton Robotics, Tecan, Perkin Elmer, Beckman Coulter A built in digital gas flow meter controls the flow rate and switches off the heaters if the gas supply drops below 30L per minute for maximum safety. Between 30 and 5L per minute, the Levante may be operated without heating using gas at input temperature only. Similarly, if the pressure exceeds 7 bar, safety valves will shut down the system to prevent damage. Optimal gas supply is 70L per minute at 6 bar. Equipped with a 48 straight needle head

Dimensions (HxWxD): 635 x 1100 x 595 mm Internal dimensions (HxWxD): 480 x 1003 x 463 mm Maximum vol (more)ume of the largest individual container: 21 l Maximum load capacity: 360 kg Maximum collection volume: 11 l Weight: 206 kg