Q-Lab Q-Sun Xenon Test Chamber Xe-1-BC Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Packard 9200 Hydrogen Generator This was removed from a university lab where it was surplus to requi (more)rements. We had the unit looked at by a service engineer. It is fully working but is leaking hydrogen. It is in reasonably good cosmetic condition, but has some marks from use. it is sold for spares/repairs

Peak Scientific HydroGen PH600 Hydrogen Generator This was removed from a university lab where it wa (more)s surplus to requirements. The unit does not produce hydrogen and has a service light. It starts up and it faults as it cannot achieve minimum pressure after several minutes of trying; the system check blinks with an Audible beep. It does not turn on the h2 delivery light (indicating that it is functioning). It is in reasonable cosmetic condition with marks from use. It is sold for spares/repairs

Texol Genysis NitroGenerator Nitrogen Generator This item was removed from a university lab where it (more) was surplus to requirements. The unit is in reasonably good cosmetic condition, with some stain marks on the top and side panels. It is mounted on four wheels and operates on a 24-volt power system, but no power adapter is supplied. When powered on, the front power light illuminated, and the programmer inside the front door displayed system information. No further testing could be carried out as the unit must be controlled by an external system. Power supply not included.

This Peak Scientific Nitrogen Gas Generator Model: NG250A was removed from a university lab where it (more) was surplus to requirements. The unit powers up and has passed a professionally performed health check with a couple of advisories. It did not require a service reset. The full report is available on request. It is in good cosmetic condition with marks from use. It comes with a user manual and disk.

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Heating performance graph of ECO Silver immersion thermostats with stainless steel tank. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

Channels: 8 Flow rates: 0.005 – 150 ml/min Rotation direction: left/right Speed settings: 1 – 99%, 1 (more)% steps

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Self-centering weighing pan of a floating nature is intended for HRP KO comparator. It is used inter (more)changeably with a standard weighing pan. The “floating” weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the HRP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass.

IKA C-MAG HS 7 Control Magnetic Hotplate Stirrer Speed Range 50-1500 RPM Setting Accuracy Speed  (more)10 rpm Heat Output 1000 W Features - The IKA C-Mag HS 7 control features a durable ceramic square top, suitable for stirring up to 20l (H2O) at speeds from 50 to 1500rpm, ensuring versatility. - With a lifetime warranty, IKA stands firmly behind its C-Mag HS 7 control, allowing scientists to focus on their research without concerns about reliability. - Regular firmware updates ensure the C-Mag HS 7 control remains cutting-edge, enhancing its functionality and reliability for sensitive experiments. - The package includes the PT 1000.60 temperature sensor and IKAFLON® magnetic stirring bars, providing a comprehensive solution for various stirring needs. - Featuring an LCD for accurate speed and temperature control, the C-Mag HS 7 control offers precise settings to meet the demands of any experiment. - The IKA SmartTemp® function offers intelligent protection, ensuring safe operation by adapting to the user’s needs and experiment parameters. - Accessories such as a screwdriver, USB cable, and power cord are included, along with a 2-year manufacturer warranty, highlighting IKA’s commitment to quality. The IKA C-Mag HS 7 control has a square top made of ceramic. It stirs volumes of up to 20l (H2o) and runs at speeds ranging from 50-1500rpm. IKA’s stands strongly by its product and technology and is offering a lifetime warranty for this product – scientists can focus on their experiments using a reliable hotplate stirrer. IKA not only focuses on hardened glass because of visibility, chemical resistance and safety, it also optically changes the game of a magnetic stirrer with a glass surface. The C-Mag HS 7 control improves over time with regular firmware updates – control of kinetics and sensitive reactions are supported by the integrated timer and counter function – the IKA SmartTemp® function protects user intelligently. PT1000 temperature sensor included. Click Here to View Product Video INCLUDED: The IKA C-MAG HS 7 Control Magnetic Hotplate Stirrer includes: - C-MAG HS 7 control - PT 1000.60 Temperature sensor, stainless steel - IKAFLON® 30 Magnetic stirring bar - IKAFLON® 40 Magnetic stirring bar - Screw driver - USB cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA C-MAG HS 7 Control Magnetic Hotplate Stirrer Specifications Number of stirring positions1Stirring quantity max. per stirring position (H2O)20 lMotor rating output9 WDirection of rotationright / leftSpeed display set-valueLCDSpeed display actual-valueLCDSpeed controlTurning knobSpeed range50 - 1500 rpmSetting accuracy speed10 rpm Stirring bar length30 - 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h)1 +K Heat output1000 WTemperature display set-valueLCDTemperature display actual-valueLCDTemperature unit°CHeating temperature rangeroom temp. - 500 °CHeat controlTurning knobDisplay resolution1 KTemperature setting range0 - 500 °CTemperature setting resolution of heating plate5 KConnection for ext. temperature sensorPT1000, ETS-D5, ETS-D6Temperature setting resolution of medium1 KAdjustable safety circuit100 - 650 °CSet-up plate materialceramicSet-up plate dimensions180 x 180 mmAutomatic reverse rotationyesIntermittent modeyesViscosity trend measurementyesTimeryesTimer displayLCDTime setting min.1 sTime setting max.143940 minSensor in medium detection (Error 5)yesTemperature measure range PT1000-10 - 350 °CSpeed deviation (no load,nominal voltage, at 1500rpm + 25 °C)2 ±%Heating rate (1l H2O in H1500)5 K/minHeat control accuracy of heating plate (at 100°C)5 ±KHeat control accuracy with ext. PT1000 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C)0.5 ±KHeat control accuracy with ETS-D5 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C)0.5 ±KHeat control accuracy with ETS-D6 (500ml H2O in 600ml beaker,40mm stirring bar,600rpm,50°C)0.2 ±KDimensions (W x H x D)220 x 88 x 354 mmWeight4 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage220 - 230 / 115 / 100 VFrequency50/60 HzPower input1020 WPower input standby2 WComparison of ModelsSpecificationsC-MAG HS 10 DigitalC-MAG HS 10C-MAG HS 4 DigitalC-MAG HS 4C-MAG HS 7 ControlC-MAG HS 7 Control PackageC-MAG HS 7 DigitalC-MAG HS 7C-MAG HS 7 PackageTemperature Range (°C)50 to 50050 to 50050 to 50050 to 500Ambient to 500Ambient to 50050 to 50050 to 50050 to 500Speed Range (RPM)100 to 1,500100 to 1,500100 to 1,500100 to 1,50050 to 1,50050 to 1,500100 to 1,500100 to 1,500100 to 1,500Heat Output (W)1500150025025010001000100010001000Platform Dimensions (mm)260 x 260260 x 260100 x 100100 x 100180 x 180180 x 180180 x 180180 x 180180 x 180Dimensions (W x H x D) (mm)300 x 105 x 415300 x 105 x 415150 x 105 x 260150 x 105 x 260220 x 88 x 354220 x 88 x 354215 x 105 x 330220 x 105 x 335220 x 105 x 335.comparison-table tr td:nth-child(6) { background-color: #fffacd; }