DURST Laborator 1200 for parts

This Bio-Rad Universal Hood II Imaging System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but the firewire camera has not been tested as it requires a PC with a firewire port. Included are; 1 x Bio-Rad Universal Hood IIPowers on with both white & UV lights working. 1 x  Digital camera with motorised lens and connection leads.The power supply unit for the camera does work and the camera powers on. The casing has a tape repair. Overall it is in good cosmetic condition with minor marks from use.

This Syngene G:Box Chemi Gel Documentation Imaging System was removed from a university lab where it (more) was surplus to requirements. The system is in reasonable cosmetic condition but there are some scratches/marks on the exterior. The interior has some leftover residue. The item powered on without issue. We tested the transilluminator outside of the box. The university confirmed it to be working but they had no software for it. We were unable to test the camera due to lack of software. System details are as follows:1x Syngene TransilluminatorModel: GV4M25X30 1x Syngene G:BoxModel: GBOX CHEMI XL 1x Synoptics Art 1.4-Syn 022 Camera1x USB to 4-pin cable1x DE9 cable with USB adapter

This BioSpectrum UVP MultiSpectral Darkroom Imaging System was removed from a university lab where i (more)t was surplus to requirements. The BioSpectrum UVP MultiSpectral Darkroom Imaging System is in good cosmetic condition and powers on, we are unable to test it further at our facility. All units are in good cosmetic condition. Includes the following: UVP Benchtop TransilluminatorComputar TV zoom Lens CameraSony Digital Graphic Printer UP-D897

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in good cosmetic condition with a minor scratch on the front. The PSU is included.

Yokogawa Cell Voyager CV1000 System w/ PC & Software Lab This system was removed from a universi (more)ty lab where it was surplus to requirements. All units that form the system are in good cosmetic condition and powered up.The system appears to be in full working order, we were able to obtain a live feed from the camera - See end of the slideshow. The PC Has the following software installed:CV1000 Software 1.06.06 With the use of the software we can control the following on the Main unit:Open/Close TrayAdjust TemperatureAdjust Plate ConfigurationChange ObjectiveAdjust Camera Position Included are; Yokogawa Cell Voyager CV1000Model: CV1000-D0-EH-L31-M301-E-JSerial#: 95M400006 Yokogawa Cell Voyager CV1000 Utility BoxModel: CV1000-D0-EH-L31-M301-E-JSerial#: 95M400012 PC Set Up.Dell Flat Panel Monitor P2719HSerial#: CN-09PR6R-WS200-89C-367S-A01 Dell Precision T1700 PCSerial#: F2VM202 Dell Keyboard & Mouse PC Has the following software installed:CV1000 Software 1.06.06 Objectives in main unit: UPLSApo10x2UPLSApo20xUPLSApo20x0UPLFLN40x0UPLSApo40x2UPLSApo60x0

Varian Turbo-V 250 Macro Torr Pump System This system was removed from a university where it was sur (more)plus to requirement. All elements are in good cosmetic condition and the blades move freely on the Varian Turbo-V 250 Macro Torr Pump. The Multi-Gauge controller powers on, we are unable to test it further at our facility. We are unable to test further at our facility. All items included in the system: 1 x Varian Turbo-V 250 Macro Torr Pump:Model no. 9699008S016 1x Multigauge controllerPart no. V209600 1 x Turbo-V 250 Controllers Instruction manualModel 969-9423Model 969-9523Model 969-9425 1 x Turbo- V 250 Pumps Instructional manual969-9007 Series969-9008 Series 1 x Multigauge Controller Instruction manual.Part no. L8350301 1 x Multigauge RS232 Board instruction manualPart no. L6439309 All cables shown in the images are included.

Leica EG1140H Paraffin Embedding Center & EG1140C Cold Plate This was removed from a university  (more)lab where it was surplus to requirements. We tested both units with a digital thermometer (not included). 1 x Model - EG1140 HCat no. 038831690Top tray - 30 x 15.5 x 8cmSide trays - 26 x 16.5 x 4cm The unit powers on and heats up on side plates and top, the thermometer was showing temperature readings of up to 50°c when on a setting of 55°c. The light does not work. 1 x Model - EG1140 C-1Cat no. 038831679The unit powers on with the plate cooling. The temperature cooled to as low as -4°c after running for around 20 minutes. Both units are in a reasonable, used cosmetic condition with marks and stains.

F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 50 g), plastic box Number o (more)f pieces in the set: 20

RS 232 cable: MAS.1 module - computer. Cable length: 10 m Compatible with: MAS.1 module MAS.1.R modu (more)le

IKA Pette Vario 0.1 - 2ul Pipette Features - Improved ergonomics as a result of replaceable handles (more) ensures precise and repeatable results - Comfortable and rapid adjustment of the pipetting volume - Set volume can be read off the display in large figures at any time - Pipette tip is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button - Piston and tip cone are made from DLC-coated (Diamond Like Carbon) stainless steel which exhibits high levels of wear and corrosion resistance - Anti-friction properties allow the pipette to require to be re-greased on rare occasions - No tools are needed for adjusting/calibrating the IKA Pette - Simplified acquisition, documentation, and monitoring with the serial number being accessed from the scannable QR Code - Can be autoclaved at 121C in a complete or dismantled state - All IKA Pette models are compatible with universal fit pipette tips from most manufacturers IKA Pipettes include three interchangeable handles in various different shapes and materials. The choice of the right handle for your particular hand means the pipette can be adadpted to suit your individual requirements Pipetting volume is adjusted in two stages (fine and coarse) with the ability to lock or unlock the volume needed. All volume adjustments can be completed easily by the user with just one hand Easy disassembly for simple maintenance and cleaning. The volume unit with piston and seal can be replaced completely in just a few hand movements. Upon re-assembly, an audible "click" is heard to ensure the pipette is secure Lies comfortably in your hand with uncompromising precise performance: The IKA PETTE vario single-channel pipettes are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term.Click Here to View Product Videos INCLUDED: The IKA Pette Vario 0.1 - 2ul Pipette includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette Vario 0.1 - 2ul Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeMechanical Air DisplacementVolume Range0.1 - 2µlIncrements0.002 µlAccuracy (Nominal Volume µl / %) ± 0.028 µl / 1.4%Precision (Nominal Volume µl / %)± 0.014 µl / 0.7%Accuracy (50% of Nominal Volume µl / %)± 0.025 µl / 2.5%Precision (50% of Nominal Volume µl / %)± 0.015 µl / 1.5%Accuracy (10% of Nominal Volume µl / %)± 0.024 µl / 12%Precision (10% of Nominal Volume µl / %)± 0.012 µl / 6%