Chromex 250IS Imaging Spectrograph Lab

Leica Biosystems Digital Pathology Scanner Aperio ScanScope AT Turbo This item was removed from a un (more)iversity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to conduct further testing at our facility. The power supply is included

SEIKO Precision VP-1500ii Video Printer With manual + paper rolls

NIKON Profile projector V-12 Profile projector V12 with 5 lenses: 5X / 10X / 20X / 50X / 100X Equipm (more)ent not tested For parts

This Bio-Rad Universal Hood II Imaging System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but the firewire camera has not been tested as it requires a PC with a firewire port. Included are; 1 x Bio-Rad Universal Hood IIPowers on with both white & UV lights working. 1 x  Digital camera with motorised lens and connection leads.The power supply unit for the camera does work and the camera powers on. The casing has a tape repair. Overall it is in good cosmetic condition with minor marks from use.

This Bruker ImagePrep Sample Preparation Matrix Deposition Device was removed from a university lab  (more)where it was surplus to requirements. The unit is in good used cosmetic condition but it does have some marks and signs of use. It powers up fine and we have been through a few of the menus and they all work as they should. We were unable to test further as it requires a gas supply etc. We were told by the lab manager that it needed additional parts to make it operational, though we are unsure what exactly the fault is. It comes with a touch pen.

This Protein Simple FluorChem E Imaging System was removed from a university lab where it was surplu (more)s to requirements. The unit powers up and the camera is working, but the lab confirmed the system has a hard disk error. We found it to have issues with he white light LED, the focus drive and the stepper motor. It is in otherwise good cosmetic condition with minor marks. Sold for spares/repairs

TopCount NXT Microplate Scintillation & Luminescence Counter This item was removed from a univer (more)sity laboratory where it was surplus to requirements. The built-in PC powers on and is in good cosmetic condition, running on Windows XP. The instrument control software attempts to initiate but fails, displaying an "Abnormal error" message on the desktop. The bottom half of the unit could not be powered on, though it is also in good cosmetic condition. No further testing has been conducted. Due to the error preventing further testing and the bottom unit to power on. This system is listed as Spares/Repair. Accessories: - 1x Perkin Elmer TopCount NXT (for Windows XP) CD - Part No.: 7801572 Rev, F - Version: 2.54.1 - 1x Windows NT Service Pack 3 CD - 1x TopCount Licence ID Key Floppy Disk - Part No.: 7800575/A - S/W Version: 1.00 - Enhanced Security Enabled Disk 1 of 1 (5/01/03) - 1x TopCount NXT Master Floppy Disk (set of 3) - Part No.: 7800358/D - 9827 - 1x Hologram - NXT Floppy Disks (set of 4) - Part No.: 7800359/D - 9827 - 1x DAC DATA BACKUP Floppy Disk - 1x TopCount Floppy Disk - S/N: 419790 - 9902 - 1x Perkin Elmer Topseal Micro Plate Heat Sealing Film - Lot No.: PW0-04419 - Condition: Opened box, good cosmetic condition Manuals: - 1x Sealed Windows NT Workstation Basics and Installation - Part No.: 236-00037 - 1x Packard TopCount NXT Quick Reference Guide - Version 1 Additional Components: - 2x Microplate Holders (Not in good cosmetic condition; plastic surrounds are cracked and broken, with metal housing damage as seen in photos) - 1x Lenovo Monitor (Type 9227-AE1) - Powers on and displays clearly - 1x Dell Keyboard (Model: KB212-B) - Good cosmetic condition and responsive to the built-in PC - 1x Microsoft Mouse (Part No.: 58264) - Good cosmetic condition and responsive to the built-in PC - 1x VGA Cable - Good cosmetic condition, responsive to both the monitor and built-in PC Model: 7401280

BROOKFIELD DV1 Viscometer with 4 Spindles + UL Adapter Type DV1MLVTJO With 4 Spindle / Spindles type (more) LV : numbers 61/ 62 / 63 / 64 The LV measurement is intended for low viscosity materials and can measure the finest materials. Typical examples include inks, oils and solvents. Viscosity range: 15 – 2,000,000 mPa*s/cP Speed: 0.3 – 100 rpm Number of increments: 18 Torque measurement accuracy: 1% of full scale range Repeatability: 0.2% of full scale range Number of spindles: 4 Power supply: 220 V, 50-60 Hz Tested at 1000 centipoise With base (stand) Year of manufacture: 2017

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The BVC control serves for efficient and convenient aspiration of supernatants. The vacuum level – a (more)nd thus the suction force – is exactly adjustable by the electronic touch panel and allows a sensitive and reproducible operation. The chemically resistant diaphragm vacuum pump is automatically turned on and off as needed, which reduces the low noise level even further. The BVC control is available in two complete equipment options with different collection flasks. The 2l borosilicate glass bottle with a protective coating has a very high chemical resistance. For larger amounts of liquids the 4l bottle of unbreakable polypropylene (PP) is used (included). The smooth surfaces allow an easy cleaning of the systems. Max. pumping speed: 0.7 m³/h Ultimate vacuum: 150 mbar Vacuum controller: Touchpanel Control range: 150 – 850 mbar (adjustable) Collection bottle: 4l Polypropylene Max. back pressure: 1.1 bar Dimensions (LxWxH): 408 x 194 x 500 mm Weight: 7.7 kg

Memmert IN160plus Natural Convection Incubator 161L, 115V Setting Temperature Range +20 to +80°C Co (more)nvection Type Natural Convection Chamber Volume 161 L (5.7 cu.ft.) Features - Set temperature range from min. 5°C above ambient up to +80°C, with a display resolution of 0.1°C for precise control - Control technology includes adjustable parameters such as temperature (Celsius or Fahrenheit), air flap position, program time, and daylight savings time - HeatBALANCE function adapts the heating distribution between upper and lower circuits from -50% to +50% for optimal performance - Fixed sterilization program (4 hours/160°C) for chamber sterilization (not for load sterilization) - AutoSAFETY system provides integrated over- and undertemperature protection with visual and audible alarms - Stainless steel interior with a volume of 161 L and a max chamber load of 462 lbs, offering robust durability - AtmoCONTROL software available for data logging, programming, and management via USB or Ethernet - High-quality textured stainless steel casing, scratch-resistant and durable, with dimensions of 29.3" x 43.5" x 23" The Memmert IN160plus Natural Convection Incubator 161L, 115V is designed for precision temperature control in demanding laboratory applications. With a working temperature range of min. 5°C above ambient up to +80°C, this incubator ensures consistent conditions for your samples. The twin Pt100 sensors in a 4-wire circuit provide accurate temperature monitoring, while the adaptive HeatBALANCE function allows for fine-tuned heat distribution between the upper and lower heating circuits. The sterilization feature, with a fixed 4-hour cycle at 160°C, ensures a sterile environment within the chamber, safeguarding the integrity of your work. Equipped with the advanced ControlCOCKPIT system, this incubator offers an intuitive interface with dual high-definition TFT displays, allowing users to adjust parameters such as temperature, air flap position, and program times. The durable stainless steel interior, reinforced with deep-drawn ribbing, provides 161 liters of internal volume and can support up to 462 lbs of total load. For seamless data management, the AtmoCONTROL software enables logging and program management via USB or Ethernet. The Memmert IN160plus combines innovation, safety, and durability, making it a top choice for precise incubation needs. INCLUDED: TheMemmert IN160plus Natural Convection Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.