VAT Diaphragm Manual UHV Gate Valve Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Agilent Technologies G1158A 1200 Series 2 Position/6 Port Valve was removed from a university l (more)ab where it was surplus to requirements. The item is in good cosmetic condition but due to the power supply not being included, we are unable to test it. Power supply not included.

VAT Diaphragm Manual Vacuum Gate Valve This was removed from a university lab where it was surplus  (more)to requirements. The valve opens and closes as it should and the seal is still present It is in good cosmetic condition.

Limpsfield LPN1/440  Natural Gas Burner 440 KW/hr - 1.5MBtu/hr Dungs Gas Valve This item was re (more)moved from a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN1/440Serial No. 01191Manufactured 8.08.14Output 440 KW/hr Dungs gas valve DMV-DLE 520/11 Autoflame Mini Mk.8 MM Combustion Management System 2 x part No. 10005 serial Nos. 12473, 12467 Hanning Elektro-Werke fan motor type OE7D2B-108  240v, 0.55KW 1.5" gas inlet pipe

Labconco Clear Chamber with 8Valves, Tall, 12.0 " dia. x 23.0 " h12.0"diameter acrylic chamber for a (more)ll FreeZone Freeze Dryers. Provides visibilityfor bulk freeze drying. Accommodates Tall Product Shelves (7317200). Includesaluminum lid with eight neoprene valves with plastic knobs for use with both 1/2"and 3/4" adapters, cap for vacuum port and pass through forelectrical cords. 8" diameter opening to collector on bottom of chamber.Will fit 10.12" or 14.0" diameter condensers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk. 12.0 in. dia. acrylic chamber for all FreeZone™ Freeze Dryers Provides visibility for bulk freeze drying Accomodates Product Shelves (5 shelves) 7317200 Includes aluminum lid with 8 valves with molded plastic knobs & one pass-through for electrical cords For use with 1/2 in. & 3/4 in. adapters Will fit 10.12 in. or 14.0 in. diameter condensers 8 in. diameter opening to collector on bottom of chamber INCLUDED: The Labconco 7318800 Clear Chamber with 8Valves, Tall, 12.0 " dia. x 23.0 " h includes: - Aluminum Lid with 8 Neoprene Valves (For use with 1/2" & 3/4" adapters) - Vacuum Port Cap - Pass Through for Electrical Cords - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collecto (more)r, Purge ValveFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. The Stoppering Tray Dryer featuresthree 16.5" x 12" processing shelves. A single 1 hp HCFC/CFC-freerefrigeration system and 1000-watt electric heater cool and heat the fluidmedium circulating through channels in the shelves. Lyo-Works™ OS provides areal time display of freeze dryer and tray dryer parameters on a 5" fullcolor, capacitive touch screen. Models with PTFE-coated collectors that canwithstand corrosive compounds are available.Features Upright stainless steel collector coil holds 6L of ice before defrosting Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time Customizable settings include language, time zone, temperature and vacuum FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. FreeZone™ Stoppering Tray Dryer provides precise control and program flexibility for consistent performance. INCLUDED: The Labconco 700622100 FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Capacity: 30 g/ 60 g/ 110 g/ 160 g Readability: 1 mg/ 2 mg/ 5 mg/ 10 mg Reproducibility: ±1 mg/ ±2 m (more)g/ ±5 mg/ ±10 mg Linearity: ±1 mg/ ±2 mg/ ±5 mg/ ±10 mg Response time: 2 sec Weighing plate: Ø 80 mm Weighing chamber height: 200 mm Weight: 5.5 kg

This Bio-Rad Universal Hood II Imaging System was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but the firewire camera has not been tested as it requires a PC with a firewire port. Included are; 1 x Bio-Rad Universal Hood IIPowers on with both white & UV lights working. 1 x  Digital camera with motorised lens and connection leads.The power supply unit for the camera does work and the camera powers on. The casing has a tape repair. Overall it is in good cosmetic condition with minor marks from use.

Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V Temperature Range Ambient +5° (more)C to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Livestock scale H315/4I series is used to fast and precise determination of mass of cattle and swine (more) with possibility of multiple tarring in all measuring range. The weighing process is carried out with closed entering gate. Barrier height is dependent on the weighing platform dimensions. The scale features an indicator PUE H315 series in stainless steel housing. The indicator comprises a LCD backlit display and function buttons. The platform and the indicator are connected with a long cable for easy mounting of the indicator on a wall. Special software with various dampening filters enables stable and precise mass readout even if the animals are moving on the platform. An optional solution is a scale for measuring all herd of cattle.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 185 mm Material: stainless steel with a carbon fiber tip for standards up to 200 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g