Varian VAT 100mm UHV Vacuum Gate Valve Part Number- VGA100IM Lab

Edwards Diffstack 100 Diffusion Pump with Backing Roughing Valve Model - BRV 25 This was removed fro (more)m a university lab where it was surplus to requirements. The unit has not been tested.

Labconco FreeZone Stoppering Tray Dryer with IsolationValve FreeZone Stoppering Tray Dryers lyophil (more)ize moderate to largeloads of vials or serum bottles and stopper them under vacuum. They offertemperature control from -40 to +40C. Options include a 6-port manifold,isolation valve and sample trays. A pneumatic mechanism stoppers containers undervacuum on three large adjustable processing shelves, 16.5” x 12” each. AnHCFC/CFC-free refrigeration system and electric heater cool and heat fluidmedium that is circulated through the shelves to maintain shelf temperatureswithin ±1C. Lyo-Works™ OS lets the user set up to 30 programs, with up to 16steps each; record, chart and store data; and receive email alerts. The traydryer connects to a FreeZone Console Freeze Dryer that provides a real timedisplay of the tray dryer’s parameters on a large capacitive touch screen.Features Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors Chamber pre-freezes samples to save time and money by eliminating need for separate freezer and product transfer Up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C 1/8 in. OD backfill port introduces sterile air or inert gas from outside source to chamber, protecting samples from atmospheric moisture and contaminants Lyo-Works™ OS provides real time display of freeze dryer and tray dryer parameters on 5 in. full color, capacitive touch screen on connected FreeZone 6, 12, or 18L Freeze Dryer (sold separately) Microprocessor-based controller allows up to 30 different temperature programs to be stored and repeated, each using up to 16 different steps Display provides navigation to manual or program mode, probe temperatures, vacuum in mBar, Torr or Pa, step of program in progress, time remaining in present step, and end of program, as well as alarms Optional 6-Port Tray Dryer Manifold accommodates either 1/2 in. or 3/4 in. flask adapters and connect to flasks and other glassware Optional built-in isolation valve separates Stoppering Tray Dryer from freeze dryer to shorten time necessary to reestablish working vacuum levels and to provide means for determining end point Freeze dryer, vacuum pump with displacement of at least 163L/minute, and freeze dry glassware (if not bulk freeze drying) are required (not included) INCLUDED: The Labconco 794801200 FreeZone Stoppering Tray Dryer with IsolationValve 115V, 60Hz includes: - Sample Temp Sensor x 3 - Communication Cable - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve Features -  (more)Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700612100 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220VFeatures - Collect fractions by time, d (more)rop, or peak to suit all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software - 3-way diverter valve prevents contamination of collected fractions (standard on the FC 204, optional on the FC 203B) The FC 203B Fraction Collector is an essential tool for low-pressure chromatography and fractionation systems. With its versatile design, it holds one rack and can accommodate various sample configurations, including up to 128 fractions in 12x75mm tubes or up to 105 fractions in 13x100mm tubes. Additionally, it can collect samples in a shallow- or deep-well microplate format. The FC 203B is available with or without a diverter valve, providing flexibility based on experimental needs. For enhanced efficiency, an optional multicolumn adapter is available, allowing collection from up to 8 separate channels simultaneously. INCLUDED: Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220V includes: - Gilson FC203B Fraction Collector w/ Diverting Valve - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The KjelMaster K-375 & KjelSampler K-376 is the smallest bench top system available, giving you more (more) flexibility in how you use your lab space. Prioritize the most important samples with the “express rack” for a highly efficient workflow. Choose between automatic or manual operation at any time to suit your changing needs. The system is compatible with all BUCHI sample tubes (100 mL, 300 mL, 500 mL) and offers free choice of methods at perfect usability. With the KjelMaster K-375 & KjelSampler K-376, there is no sample tube cleaning or glass transfer necessary, saving you time and ensuring your process remains clean and reliable. All handling of reagents is automated, eliminating any contact between you and harmful chemicals. Load your sample rack safely and smoothly at any time for a comfortable user experience. Finally, extend the lifetime of your glassware and save costs thanks to reduced exposure to chemicals. Screen: 8.4 inch color touch Memory: >100000 results Minimal titrator volume: 2 µl/step Pumps: NaOH, H3BO3, H2O Adjustable steam output: 30 – 100 % Measuring range: 0.02 – 200 mg N Reproducibility (RSD): <1 % Recovery: >99.5 % (1 – 200 mg N) RS232 ports: 2 (balance, KjelSampler) USB ports: 3 (printer, barcode reader, memory stick) Safety sensors: 3 (service door, protecting door, sample tube) Dimensions (WxHxD): 458 x 670 x 431 mm Weight: 32 kg System consists of: Büchi KjelMaster K-375 Büchi KjelSampler K-376 Büchi Kjel­Digester K-446 Omnilab FoodALYT Pump 2 Sample racks 45 300 ml Sample tubes

Job Lot of Assorted Agilent Parts These were removed from a laboratory where they were surplus to r (more)equirements. All items are untested and are in reasonably good used condition. Due to the items being untested and missing various parts, this job lot is listed as Spares or Repairs. All items included: Dionex Ultimate 3000 Autosampler Injection ValveP/N - MHP7900-000S/N - 13756 Yokogawa G1314-66521-VWM Board for Agilent 1100No Info on Board Agilent Thermo Waters Systec 9000-1472 ZHCRP/N - 9000-1472S/N - 1022482 VEXTA STEPPING MOTOR C7693-9012K-C1Model - C7693-9012K-C1 ERC-6210 Air Vacuum PumpModel - ERC-6210S/N - 963647A-00244C* MAXON MOTOR DC 526770 Agilent HPLC Standard Flow Cell, 4MPa(40 bar), G1314-60086S/N - 5487 Sena Parani-SD1000S/N - 1A2D3E

MARSHALL Select MS-PM10UL 8-Channel Pipette, 0.5-10ul Volume Range 0.5 to 10ul Increment 0.1ul Pipet (more)te Type Manual Air Displacement Features - Adjustable from 0.5 to 10µl for handling small sample volumes accurately - 0.1 µl increments for precise volume adjustments - Lightweight and low-force design minimizes hand strain - 8-channel head rotates for convenient and flexible pipetting - Allows for easy maintenance and repair with separate piston and tip cone assemblies - Works with universal pipette tips for versatility - Manufactured from innovative materials for long-lasting use - Simple calibration process ensures consistent accuracy The MARSHALL Select MS-PM10UL 8-Channel Pipette is an advanced tool crafted for precision liquid handling in laboratory settings. With a volume range of 0.5 to 10 µl and a fine 0.1 µl increment, this pipette delivers exceptional accuracy and precision for delicate and small-volume tasks. Its lightweight, ergonomic design is optimized to minimize user fatigue and prevent repetitive strain injuries, making it a comfortable choice for extended use. The pipette features a clear digital display for easy volume setting, ensuring quick and accurate adjustments. Built from innovative materials, the MS-PM10UL is designed for durability and ease of maintenance, supporting consistent performance in demanding environments. This 8-channel pipette is ideally suited for use with 96-well plates, allowing for efficient and simultaneous pipetting across multiple wells. The rotating dispensing head enhances convenience and flexibility during operation, making it easy to access and manipulate samples. Each channel has individual piston and tip cone assemblies, simplifying repairs and maintenance while ensuring precise performance. The pipette’s compound material tip cone design allows for visual verification of seals, enhancing accuracy and reliability. Additionally, the MS-PM10UL is compatible with universal pipette tips, offering versatility in various lab applications. With its user-friendly features and superior design, the MARSHALL Select MS-PM10UL 8-Channel Pipette is an essential instrument for laboratories that require precise and efficient pipetting of small volumes. INCLUDED: The MARSHALL Select MS-PM10UL 8-Channel Pipette, 0.5-10ul includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V Temperature Range Ambient +5° (more)C to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7&rdquo; colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal&rsquo;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.