Severn Instruments PCV-3000 Gate Control Valve

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Cheminert valve head material: PEEK 1/16″ fittings With control module for manual control or by RS-2 (more)32

ITEM-35538

This ALA Scientific Instruments BPS-8 Valve Control System was removed from a university lab where i (more)t was surplus to requirements. It is in good cosmetic condition and powers up, we are unable to test further at our facility. This item includes the power supply.

Labconco Clear Chamber with 8Valves, Tall, 12.0 " dia. x 23.0 " h12.0"diameter acrylic chamber for a (more)ll FreeZone Freeze Dryers. Provides visibilityfor bulk freeze drying. Accommodates Tall Product Shelves (7317200). Includesaluminum lid with eight neoprene valves with plastic knobs for use with both 1/2"and 3/4" adapters, cap for vacuum port and pass through forelectrical cords. 8" diameter opening to collector on bottom of chamber.Will fit 10.12" or 14.0" diameter condensers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk. 12.0 in. dia. acrylic chamber for all FreeZone™ Freeze Dryers Provides visibility for bulk freeze drying Accomodates Product Shelves (5 shelves) 7317200 Includes aluminum lid with 8 valves with molded plastic knobs & one pass-through for electrical cords For use with 1/2 in. & 3/4 in. adapters Will fit 10.12 in. or 14.0 in. diameter condensers 8 in. diameter opening to collector on bottom of chamber INCLUDED: The Labconco 7318800 Clear Chamber with 8Valves, Tall, 12.0 " dia. x 23.0 " h includes: - Aluminum Lid with 8 Neoprene Valves (For use with 1/2" & 3/4" adapters) - Vacuum Port Cap - Pass Through for Electrical Cords - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and stainless steel coil a (more)nd collector, Purge Valve Features - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. The Stoppering Tray Dryer featuresthree 16.5" x 12" processing shelves. A single 1 hp HCFC/CFC-freerefrigeration system and 1000-watt electric heater cool and heat the fluidmedium circulating through channels in the shelves. Lyo-Works™ OS provides areal time display of freeze dryer and tray dryer parameters on a 5" fullcolor, capacitive touch screen. Models with PTFE-coated collectors that canwithstand corrosive compounds are available. Features Upright stainless steel collector coil holds 6L of ice before defrosting Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level One-touch data logging and display provides information to maximize sample quality and minimize run time Customizable settings include language, time zone, temperature and vacuum FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. FreeZone™ Stoppering Tray Dryer provides precise control and program flexibility for consistent performance. INCLUDED: The Labconco 700621100 FreeZone 6L -50C Console Freeze Dryer with Stoppering Tray Dryer and stainless steel coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Waters Xevo TQ Mass Spectrometer is an advanced, bench top, tandem quadrupole mass spectrometer  (more)designed for ultra high performance LC/MS/MS applications. Unlike conventional tandem quadrupole mass spectrometers, the Xevo TQ MS utilizes unique T-Wave and ScanWave enabled collision cell technology to provide a highly flexible analytical tool capable of supporting both quantitative and qualitative studies on a single MS platform. The Xevo TQ MS is a robust platform for quantititive LC/MS/MS, featuring high speed MRM (Multiple Reaction Monitoring), with enhanced full scan spectral acquisition modes providing additional qualitative LC/MS/MS capibilities. The system incoporates IntelliStart Technology, for automated system optimization and status monitoring, ensuring that the highest quality data is routinely available to all levels of operator. Acquisition modes: Full scan MS Product ion scan (ScanWave enhanced) Precursor ion scan Constant neutral loss Selected ion recording (SIR) Multiple reaction monitoring (MRM) Survey scan modes: Full scan MS triggered product ion scan Precursor ion scan triggered product ion scan Constant neutral loss triggered product ion scan Quan Qual mode: MRM triggered ScanWave enhanced product ion spectral acquisition Mass range: 2 to 2048 m/z Scan speed: Up to 10000 Da/s Examples of achievable acquisition rates: 10 scans per second (100 to 1000 m/z) 20 scans per second (50 to 500 m/z) Mass stability: Mass drift is less than 0.1 amu over a 24 h period Linearity of response: The linearity of response relative to sample concentration, for a specified compound, is five orders of magnitude from limit detection

If you buy a WLY series balance by July 31, 2024, you will receive each of these products along with (more) a FREE lifetime license for the Workflow Module. Precision Balance WLY Fast and accurate weight determination thanks to the duo: the WLY multifunction balance and the PUE7 weighing terminal. Ease of operation and maximum automation of the weighing process. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations and differential weighing. The power of WLY’s working mods. Use the potential Barcode scanners, receipt printers, label printers, RFID readers, PC equipment or an additional weighing platform – thanks to multipurpose software, WLY balance can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. DIY with WLY With WLY you will Do It Yourself: You will program on-screen keys and functional keys You will program infrared proximity sensors You will design printouts You will design text data that is displayed in an indicator display. This balance is the result of a combination of our experience and true precision. Want to generate labels? You can. With Label Editor software, you will generate: Standard labels for single products C labels for cumulative containers CC labels for containers with cumulative containers. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.