Labconco 700611100 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector, Purge Valve 115V, 60Hz

Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System Collector Temperature -85 (more)°C Water Removal Over 24 Hours 1.84L Ice Holding Capacity 2.5L Features - Stainless steel collector coil capable of removing 1.84 L of water in 24 hours and holding 2.5 L of ice before defrosting - Two 1/3 HP HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F) and work in concert with a 1000-watt heater to cool and heat fluid medium circulating through channels in the shelf. Not for use with samples containing methanol or ethanol - Processing shelf, 12.4" w x 14.5" d (31.5 x 36.8 cm). Spacing between shelf and top of chamber accommodates containers with stoppers up to 148 mm maximum height - One probe for monitoring temperature of sample in chamber - Temperature ramp and hold programming from -55°C to +50°C (-67°F to +122°F) and -75°C (-103°F) during pre-freezing. Controls temperature to ±1°C of set point. Memory to store 30 programs with 16 segments each including number of steps, ramp rate, shelf temperature, hold time and vacuum level - Full color, 5" capacitive touchscreen featuring Lyo-Works™ OS with real time display of collector temperature and vacuum level - Manual start-up buttons for collector and shelf temperature control and vacuum pull down - Alerts, diagnostic tests, user manual and defrost control - Stoppering control knob, vacuum release control knob and 1/8" OD user-supplied sterile/inert gas backfill port - Four left side-mounted neoprene valves with molded plastic knobs and fittings that accommodate 1/2" and 3/4" flask adapters - USB port, ethernet connection, and electrical receptacle for vacuum pump - Hot gas defrost with stainless steel drain pan, silicone drain hose and auto shut off at +60°C (+140°F) - Clear acrylic door, 1" thick, with silicon gasket and latch 3/4" OD vacuum connection. 36" long, 3/4" ID vacuum hose with two clamps The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System is designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy labs. The upright stainless steel collector coil holds 2.5 liters of ice before defrosting. Two 1/3 hp HCFC/CFC-free refrigeration compressors cool the collector to -85°C (-121°F), suitable for aqueous or dilute acetonitrile samples. Temperature-controlled shelves range from -55°C to +50°C (-67°F to +122°F) and a maximum of -75°C (-103°F) during pre-freezing. The shelves provide pneumatic stoppering with a diaphragm, eliminating the need for compressed gas. Lyo-Works™ OS provides a real time display of collector temperature and vacuum level, shown on a 5" full color, capacitive touchscreen. A stoppering tray dryer and four valve ports are built in. The included Edwards RV8 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 794001010 FreeZone 2.5L -85C Triad Complete Freeze Dryer System includes: - Labconco 794001010 FreeZone 2.5L -85C Triad Benchtop Freeze Dryer 230V, 60Hz - Edwards RV8 Vacuum Pump - All Vacuum Tubing - Edwards EMF10 Mist Filter - Pump Oil - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -84C Console Freeze Dryer with stainless steel coil and collector Features - Pa (more)tented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large samples loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryers such as the FreeZone StopperingTray Dryer (pump and tray dryer sold separately). These models offer a broadrange of built-in options including a purge valve and mini chamber. The uprightstainless steel collector coil holds 6 liters of ice before defrosting. Two 1/3hp HCFC/CFC-free refrigeration systems cool the collector to -84C (-119F),suitable for low eutectic point samples including acetonitrile. Lyo-Works™ OSprovides a real time display of collector temperature, vacuum level andoptional End-Zone™ end point detection system, shown on a 5" full color,capacitive touch screen. Models with PTFE-coated collectors that can withstandcorrosive compounds are available.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Internal coil maximizes vapor-trapping efficiency Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 710611000 FreeZone 6L -84C Console Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector Features - Patented mois (more)ture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700612000 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector Features - Pa (more)tented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable. Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700611000 FreeZone 6L -50C Console Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE CoatedFeatures - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of PTFE coated 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV5 Rotary Vane Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes the Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE coil and collector, Labconco 7522801 12-Port Drying Chamber PTFE-Coated, and an Edwards RV5 Rotary Vane Vacuum Pump. The Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector is designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright PTFE collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. The Labconco 7522801 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel with corrosion-resistant PTFE-coated interior. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers. Drying Chambers provide a means to attach flasks to your freeze dryer or contain samples in bulk. The Edwards RV5 Rotary Vane Vacuum Pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. INCLUDED: The Labconco 700402000 FreeZone 4.5L -50C Complete Freeze Dryer System, PTFE Coated includes: - Labconco 700402000 FreeZone 4.5L -50C Benchtop Freeze Dryer with PTFE Coil and Collector - Labconco 7522801 12-Port Drying Chamber, PTFE-Coated - Edwards RV5 Vacuum Pump - All Vacuum Tubing - Mist Filter - Pump Oil - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco FreeZone 4.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector Features - (more) Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 4.5 Liter Benchtop Freeze Dryers are designed for lyophilizing light to moderate sample loads. The compact design is ideal for labs with limited floor space. The upright stainless steel collector coil holds 4.5 liters of ice before defrosting. A single 1/3 hp HCFC/CFC-free refrigeration system cools the collector to -50C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. Models with PTFE-coated collectors that can withstand corrosive compounds are available. Features Upright stainOptional PTFE-coated collectors withstand corrosive compounds Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run. INCLUDED: The Labconco 700401000 FreeZone 4.5L -50C Benchtop Freeze Dryer with stainless steel coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This listing is for a Brand New Harvest Right Large Pharmaceutical PRO Freeze Dryer sold through ULM (more)freezedryers.comWe are stock holders in UKPrice Before VAT - £5,950Harvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh.Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency.What’s IncludedLarge Pharma Freeze DryerPremier Vacuum PumpVacuum Pump OilOil FilterStainless Steel Trays (set of 8)Guide to Freeze Drying  Key Features & Benefits - The freeze dryer has built in intelligence. It automatically and perfectly manages the freeze drying process - The ideal vacuum pressure and drying temperature is maintained for each material—preserves freshness and potency - 10.25 square feet of tray space—nearly twice the capacity of Harvest Right’s standard Large freeze dryer - Shelf Unit Has shelves for 8 trays (each tray 228.6mm W x 520.7mm D x 19mm H) - 6 liters of ice capacity - Weight: 68KG  Warranty1 Year international warranty provided by Harvest Right.  Dimensions Overall product dimensions: 514.3mm W x 603.2mm D x 781mm H Perfect for a counter top, cart or table.  Power A dedicated 20 amp circuit is required.  Shipping Info - The large freeze dryer ships in one package with a total weight of 177KG - Item will be delivered in international shipping crate (must be purchased from Harvest Right when exporting machines out of USA)- One freeze dryer in fully encased shipping crate: 920 x 770 x 1500H - If you would like to collect from site, we would be able to cut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box of parts Maintenance Simply filter and replace oil. Takes one or two minutes.  Vacuum Pump Each vacuum pump has been factory tested to guarantee 25 microns (25,400 Microns = 1 Inch of Hg) or better, and listed CFM performance.  Vacuum Pump Technical Specifications Oil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil or JB Industries Black Gold Vacuum Pump Oil Only DC Motor Energy Efficient Voltage: Standard, 230v Dimensions: 414mm x 152.4 x 307.3 Weight: 14.5KG Noise: 52 decibels  Product Comparison Industrial Oil Pump vs Standard Oil Pump Oil Changes This new Industrial Pump rarely needs to have the oil changed or filtered. The pump has a gas ballast feature that makes it so water does not stay in the oil. Because of this, the oil in the pump will be pristine and clear, even after 30 or more batches. You simply won’t need to change the oil until you have run 25 to 40 batches. Whereas, the oil in the standard vacuum pump needs to be changed and filtered every 4 or 5 batches (when using the new 3/8 inch vacuum hose). Vacuum Pressure Under cold and hot conditions the Industrial Pump will pull a deeper vacuum than the Standard Pump. Under cold conditions the difference is .05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump. Whereas, under warm conditions the difference is much greater: .05 Pascal for the Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especially not affected by warm, ambient conditions. When temperatures rise, it will pull a vacuum far better than the Standard Pump. The Industrial Pump is just not affected by outside heat. It pulls the same deep vacuum even when it is in a warm environment. Noise The Industrial Pump is substantially quieter than the Standard Pump, 52 decibels versus 64 decibels. The Industrial Pump at 52 decibels is about the same as a refrigerator. Oil Mist Filter Both pumps come with an oil mist filter. However, the Industrial Pump’s oil mist filter allows for no oil spray at all and it will last much longer. Power Use The Industrial Pump uses less power than the Standard Pump (187 watts versus 218 watts). Amperage Under hot conditions at ultimate vacuum pressure the Standard Pump pulls 2.1 amps while the Industrial Pump only pulls 1.7 amps. Hence, the Industrial Pump is more efficient. Weight The Industrial Pump is easier to move around as it weighs 5 pounds less than the Standard Pump (32 lbs. versus 37 lbs.) Life The Industrial Pump is more durable and will last longer than the Standard Pump.

Thermoregulation and thermal stability at their best The Auto-Tuning thermoregulation system guarant (more)ees excellent thermal homogeneity and stability (±0.5°C). Ecological cooling system and low operating costs. Selectable incubation temperature and working range from 3 to 50°C. Uniform temperature thanks to VELP ventilation technology. 3-digit DIGITAL DISPLAY, resolution 0.1°C. - Transparent internal door for observation of the sample without temperature alterations Reliable and easy to control Volume of 109 liters net. Internal sockets to power devices. Intuitive digital interface, with three buttons for easy setup of the instrument. Constant monitoring according to GLP (Good Laboratory Practice). Adjustable recording time (in case of connection to VELP Ermes and TempSoft™). The optional TempSoft ™ incorporates high / low alarm thresholds. Quick and easy calibration. In the photo: the interior of the FOC 120E model, with the two electrical sockets, forced ventilation and the 6-position system for BOD Sensor Velp analysis; the control panel with the clear digital display to the tenth of a degree; the transparent internal door. Our life is connected, giving us previously unimaginable possibilities, why not connect your laboratory too? Improved productivity and safety; sharing analysis and assistance in a few clicks! Monitor your instrument anytime, anywhere with VELP Ermes Thanks to Velp Ermes you will no longer need cables. Discover the platform that allows you to reduce repetitive manual tasks with real-time control of your FOC Connect wherever you are. Access the data recording of your instrument wherever you are, in total safety, through the VELP Ermes platform and benefit from software updates and immediate ad hoc assistance, without the need for specialized technicians. Immediate notifications and alerts will allow you to always be informed about the status of your analyzes, improving productivity and reproducibility. The Ermes cloud subscription, which allows you to connect up to 10 instruments, is available for 1 or 3 years and must be ordered separately. IN OPTION! Control your FOC Connect via TEMPSoft ™ software Through the optional TEMPSoft ™ software and the relative connection of the FOC Connect to the PC, you can: - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with GLP (Good Laboratory Practice) FOC Connect is supplied with the MODBUS communication protocol.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge Cell Culture Bundle w/ Swing Out Rotor for  (more)15ml and 50ml Tubes Speed Range 200 to 16,000 RPM Maximum Capacity 4 x 750ml Warranty 2 Year Manufacturer's Features - Automatic rotor identification makes switching between applications extremely easy - Simple one-hand operation enabled by the selection button/rotary knob combination—even with gloves on - Large backlit LCD display shows centrifugation settings and real-time parameters on one interface - Program storage up to 99 runs including parameter settings and rotor types - Maintenance-free induction drive - Thread-free rotor locking mechanism - Optimized airflow system to keep samples cool (non-refrigerated models) - Chemical and corrosion-resistant stainless-steel housing ensures durability in lab environments - Self-diagnostic program to record usage and error history for easy maintenance and to minimize downtime - Over-speed protection, immediately upon rotor insertion - Active imbalance-detection with individual imbalance tolerances set for each rotor - Motorized lid-locking system to protect operators from accidental injuries - Sealed and bio-containment rotors to safeguard operators from harmful aerosols Click Here to View Product Video The Ohaus Frontier 5000 Series Multi-Pro Centrifuges are designed for universal use in multiple applications in research, industrial, and clinical laboratories and can be combined with a range of rotors and accessories for customized use. These centrifuges are available in 7 models with capacities from 0.2ml to 4 × 750 ml - and feature high speed performance at maximum volume, automatic rotor identification and safety features. These multi-purpose centrifuges offer a high-speed centrifugation platform which can be customized to fit workflow needs using a wide variety of rotors and accessories. The intuitive design of the centrifuges & accessories enables easy access to parameter settings, and quick rotation between applications. The performance of these centrifuges is propelled by German engineering, and high-quality components for reliable use. Constructed of chemical-resistant stainless steel to ensure durability in lab use. The Frontier 5000 Series is equipped with protective features, including automatic overspeed protection, imbalance detection and self-diagnostic system to ensure reliable use and operator safety. Interested in additional rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Ohaus FC5916R Frontier Multi-Pro Refrigerated Centrifuge Cell Culture Bundle w/ Swing Out Rotor for 15ml and 50ml Tubes includes: - FC5916R Frontier Multi-Pro Refrigerated Centrifuge - 30553085 Rotor Swing Out 4x750ml ID Sealable - 2 x 30602502 Bucket 1x750ml D98mm FB 2/pk (4 Total) - 2 x 30553130 Rack 7x50ml D29mm FA 2/pk (4 Total) - 2 x 30553134 Rack 17x15ml D17mm FA 2/pk (4 Total) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph 036300420 Overhead Stirrer Impeller, PR 32 Ringed Propeller Due to its blade dimensions, th (more)e ringed pitched-blade impeller PR 32 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 113-225 mm, ideal ground clearance: 23-45 mm, ideal filling level: 113-225 mm, ideal volume: 1,100-8,900 ml. The ringed pitched-blade impeller PR 32 has a total length of 400 mm and is made of stainless steel. Its stirrer shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300420 Overhead Stirrer Impeller, PR 32 Ringed Propeller includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty