HVA Gate Valve (DN160CF, Model 11120-0604) For UHV System Lab

VAT Diaphragm Manual Vacuum Gate Valve This was removed from a university lab where it was surplus  (more)to requirements. The valve opens and closes as it should and the seal is still present It is in good cosmetic condition.

This item has just arrived in our stock. Please enquire for further details.

Labconco FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve Features -  (more)Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large sample loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryer such as the FreeZoneStoppering Tray Dryers (pump and tray dryer sold separately). These modelsoffer the broadest range of built-in options including a shell freezer. Theupright stainless steel collector coil holds 6 liters of ice before defrosting.A single 3/4 hp HCFC/CFC-free refrigeration system cools the collector to -50°C (-58F), suitable for aqueous samples. Lyo-Works™ OS provides a real timedisplay of collector temperature, vacuum level and optional End-Zone™ end pointdetection system, shown on a 5" full color, capacitive touch screen.Models with PTFE-coated collectors that can withstand corrosive compounds areavailable.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting Lyo-Works OS provides a real time display of collector temperature and vacuum level Flexible programming and control of optional drying accessories Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time Front viewing window makes monitoring vacuum pump oil hassle free FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 700612100 FreeZone 6L -50C Console Freeze Dryer with PTFE coil and collector, Purge Valve 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Manufacturer: ERWEKA Model: TPK 2 S/N: 124164.10d5 MFG date: 2005 Description: The ERWEKA Valve-Box (more) is testing unit for Dry Powder Inhalers.With Dry Powder Inhalers, both the emitted and fine particle dose are affected by the strength and duration of the patient’s inspiration.The ERWEKA Valve-Box allows the user to adjust the air flow from the Vacuum pump in such way, that it complies with the latest pharmacopoeial specifications.If required hard-copy documentation of the test-parameters can be created. Specifications and features: TPK Version 1.07AThe TPK 2 menu system automatically guides the user through the correct test set-up procedure.A series of menus guide the user through the operation of the instrument.Two external pressure ports.4-line LCD display of all parameters.USB printer port interface for data output.U: 240 vF: 50-60 Hz Items delivered: - ERWEKA TPK 2- Power Supply- Instruction Manual as PDF via E-Mail request Condition: The Valve-Box is in very good cosmetic condition and 100% functional tested.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Jun-Air 2000-40MD2 Compressor was removed from a university lab where it was surplus to require (more)ments. The unit powers up and is in working order. The item is in a reasonable, used cosmetic condition. There is some damage in the top right of the unit. Hours - 11134 71

Benchmark IPD9600-96 Adapter for microplates and tube holder, set of 2 The Benchmark IPD9600-96 Adap (more)ter is a set of two adapters designed for use with microplates and tube holders in conjunction with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. These adapters can accommodate 96 and 384 well plates as well as 2.0 ml microtubes with the addition of a separate adapter. The adapters are ideal for high-throughput applications as they allow for easy loading and unloading of microplates and tube holders. The IPD9600-96 Adapter set is made of durable materials and is easy to clean and sterilize, making it a valuable accessory for any laboratory that requires high-throughput homogenization and grinding of biological samples. These adapters are designed for use with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. INCLUDED: The Benchmark IPD9600-96 Adapter for microplates and tube holder, set of 2 includes: - Set of 2 Benchmark IPD9600-86 Adapters for Microplates and Tubeholders - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 deg (more)ree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

Temperature range: 2°C to 12°C Content: 600 ltr Dimensions (WxDxH): 815 x 755 x 2160 mm Weight: 130  (more)kg

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/1 is designed for scales equipped with terminal TMC series (scales in CPG systems, etc). It is installed close to the scale. Communication through RS 232 interface, power supply +5V DC from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing. Intended Use: Designed for scales equipped with terminal TMC series (scales in CPG systems, etc). It is installed close to the scale. Communication through RS 232 interface, power supply +5V DC from scale terminal.