Agilent Technologies G1158A 1200 Series 2 Position/6 Port Valve

This Rheodyne MXT715-000 Switching Valve was removed from a university lab where it was surplus to r (more)equirements. The unit powers up with the included PSU. It has not been tested further. It is in good cosmetic condition with minor marks from use.

VAT Diaphragm Manual Vacuum Gate Valve This was removed from a university lab where it was surplus  (more)to requirements. The valve opens and closes as it should and the seal is still present It is in good cosmetic condition.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco FreeZone 6L -84C Console Freeze Dryer with PTFE coil and collector, Purge Valve & Mini  (more)ChamberFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers are designed forlyophilizing moderate to large samples loads or numerous small containerbatches. The console features a front viewing window, interior space for avacuum pump, and accommodation for a large tray dryers such as the FreeZone StopperingTray Dryer (pump and tray dryer sold separately). These models offer a broadrange of built-in options including a purge valve and mini chamber. The uprightstainless steel collector coil holds 6 liters of ice before defrosting. Two 1/3hp HCFC/CFC-free refrigeration systems cool the collector to -84C (-119F),suitable for low eutectic point samples including acetonitrile. Lyo-Works™ OSprovides a real time display of collector temperature, vacuum level andoptional End-Zone™ end point detection system, shown on a 5" full color,capacitive touch screen. Models with PTFE-coated collectors that can withstandcorrosive compounds are available.Features Upright stainless steel collector coil holds 6 liters of ice before defrosting -84C (for low eutectic point samples including acetonitrile) collector Internal coil maximizes vapor-trapping efficiency Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run INCLUDED: The Labconco 710612200 FreeZone 6L -84C Console Freeze Dryer with PTFE coil and collector, Purge Valve & Mini Chamber 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph Rotavac Valve Tec Ultimate Vacuum 12 mbar Suction Capacity 0.75 m³/h Nominal Rotation Spee (more)d 1,800 RPM Features - Recommended for solvents with low or medium boiling points - Vacuum can be controlled through valves or manual vacuum controllers - A vacuum valve is necessary if you wish to combine this vacuum pump with Hei-VAP Expert Control/Ultimate Control rotary evaporators All components that come in contact with media are made from chemically resistant fluoropolymer. The durable PTFE design guarantees a superior diaphragm lifespan. Head cover and clamping disc have a stable core made from metal that offers unsurpassed long-term performance. The direct pump drive (without belt) has no wear parts, is exceptionally quiet and creates a very low vibration environment. The physically optimized gas ballast valve prevents from condensate collecting in the pump. Condenser is not in scope of delivery. INCLUDED: The Heidolph Rotavac Valve Tec includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Gilson FC204 Fraction Collector Prep Valve Assembly Package These assemblies and packages add fracti (more)on collection capabilities to various Gilson instruments. INCLUDED: The Gilson FC204 Fraction Collector Prep Valve Assembly Package includes: - Gilson FC204 Fraction Collector Prep Valve Assembly Package - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Mini heating plates and magnetic stirrers This ruggedly built OHAUS series of small instruments can  (more)heat and mix up to 1,000ml of water on their 102 x 102mm ceramic plate. They are perfect for school labs and other applications that require simple shaking and heating on a daily basis. All models are equipped with a support rod hook with a locking knob that accommodates the optional support rod kit. Stir models include a 38mm PTFE coated magnetic stir bar. Available models: Model with heating: up to 500°C. Fixed temperature model: 500°C. Model with stirring: 500°C. Model with heating and stirring: stirring from 100 to 1200 rpm; temp. up to 500°C. Applications Boiling water, solubilization buffers and reagents, preparation media, concentration samples Operation Detachable three-wire cable and plug (included) Structure Valox armor, knobs with basic controls, 3.8cm stir bar (included with stir models), On / Off toggle switch (fixed temperature models) ___________ Not sure which model to choose? Download the Ohaus Hotplate and Shaker Selection Guide for a quick overview of all available models.

Transponder card reader is used for quick identification and logging of operators to a weighing syst (more)em or identification of vehicles on a weighbridge. CK-02/1 is designed for scales equipped with terminal TMC series (scales in CPG systems, etc). It is installed close to the scale. Communication through RS 232 interface, power supply +5V DC from scale terminal. Area of Use: Additional equipment of load cell based industrial scales; Identification of weighing instrument operator; Identification of vehicles on weighbridges. Design: Transponder card reader CK-02 is manufactured in plastic housing. Intended Use: Designed for scales equipped with terminal TMC series (scales in CPG systems, etc). It is installed close to the scale. Communication through RS 232 interface, power supply +5V DC from scale terminal.

RS 232 cable: weighing device (HRP, MWSH, MWLH) – terminal HY10, PUE5. Cable length: 2 m Optio (more)nal cable length: 5 m or 10 m (additional payment) Compatible with: HRP platforms MWSH weighing module MWLH weighing module

Ohaus Guardian 7000 e-G71HS10C Hotplate Stirrer, 120V The Ohaus Guardian 7000 Hotplate Stirrers are  (more)designed with outstanding safety features and superior heating and mixing performance. The SmartHousing is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled glass control panel. The bright LCD display includes intuitive icons, temperature, speed and time settings - all designed to monitor performance from across the lab. Protect your lab with SmartPresence and SmartLink technologies. These exclusive features automatically shut off the heater if no one is detected after a user set “time out” period has passed. An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 RPM is made possible by the design of a powerful motor, strong magnet and software-controlled ramp rate, ensuring secure magnetic coupling for viscous applications. SmartHeat allows you to set the maximum temperature of the unit and SmartRate enables fast or slow temperature and speed ramp rates. The programming feature allows storage of 5 multi-step programs. INCLUDED: The Ohaus Guardian 7000 e-G71HS10C Hotplate Stirrer, 120V includes: - Two Stir Bars (40 x 8mm and 28.6 x 8mm) - 8" Stainless Steel RTD Temperature Probe - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark One-Block Digital Dry Bath Benchmark Digital Dry Baths provide accurate “set and walk away (more)” digital temperature selection, eliminating the need for external thermometers and repetitive “fine tuning” of a temperature control knob. Simply enter the desired temperature on the digital touchpad and the Benchmark Dry Bath provides accurate temperature with real time monitoring that continuously maintains the selected temperature within ±0.2C. In addition, a digital timer is built into the touchpad display. Although it is not designed to shut off the heater, it can be used to alert the user that a chosen time interval has timed out. The cavities of the high grade aluminum blocks are precision machined to match the conical size and shape of 0.5, 1.5, 2.0, 15 and 50ml tube sizes, providing unsurpassed temperature transfer. Assorted blocks are available for compatibility with nearly all common laboratory tubes and plates. Custom blocks are also available upon request. All Benchmark dry baths offer a built-in user recalibration function, to guarantee long term temperature accuracy. Each dry bath includes an easy to use block lifter, with a temperature insulated handle for quick, convenient exchange of blocks, even while they’re still hot.INCLUDED: The Benchmark One-Block Digital Dry Bath includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hersteller: Keysight Modell: MSOX2024A  Beschreibung: Das Keysight Technologies MSOX2024A Oszillosko (more)p ist ein Mixed-Signal-Oszilloskop mit vier analogen und acht digitalen Kanälen und 200MHz Bandbreite. Dieses Oszilloskop bietet 1Mpts Speicher und die acht digitalen Kanäle haben eine Abtastrate von 1GSa/s mit einer Umschaltrate von 50MHz. Das Oszilloskop MSOX2024A führt 23 automatische Messungen durch, wie z. B. Spannung, Zeit und Frequenz, sowie fünf Wellenformfunktionen, einschließlich Addition, Subtraktion, Multiplikation, Division und FFT. Dieses Oszilloskop verfügt über ein 8,5-Zoll-LCD-Display mit 64 Helligkeitsstufen, das 50 % mehr Anzeigefläche und eine 3,5-mal höhere Auflösung (WVGA 800x480) bietet. Das Oszilloskop MSOX2024A ist mit der benutzerdefinierten ASIC-Technologie MegaZoom-IV ausgestattet, die eine Geschwindigkeit von bis zu 50.000 Wfms/s bietet, um das Signal im Detail und seltene Anomalien zu betrachten. Dieses Oszilloskop ist mit optionalen Upgrades wie Bandbreite, Messanwendungen, Protokollanalysator (Software), integriertem 20-MHz-Funktionsgenerator WaveGen, Digitalvoltmeter sowie Triggerung und Dekodierung serieller Protokolle erhältlich. Die MSOX2024A Oszilloskope gehören zur InfiniiVision 2000 X-Serie. Kernmerkmale: -Kalibriertes Mixed-Signal-Oszilloskop mit MegaZoom-IV Custom ASIC Technologie -Modelle mit 70MHz, 100MHz und 200MHz Bandbreite -Modelle mit 2+8 Kanälen und 4+8 Kanälen für Mixed-Signal-Oszilloskope (MSO) -Aktualisierungsrate von 50.000 Wellenformen/Sekunde -Interleaved 2GSa/s oder nicht-interleaved 1GSa/s Abtastrate. 8,5" WVGA (800 x 480) LCD-Display mit 1,75ns Anstiegszeit -Bis zu 1Mpts Speichertiefe Integrierter 5-stelliger Hardware-Zähler -Integriertes Digitalvoltmeter (DVM) -Anschlussmöglichkeiten USB-Host (einer vorne, einer hinten) USB-Gerät LAN (wahlweise) GPIB (wahlweise) -Triggertypen: Flanke, Pulsbreite, Muster und Video USB-Anschlüsse zum einfachen Drucken, Speichern und Weitergeben von Daten Technische Daten: Betriebstemperaturbereich: 0°C bis +55°C 100V bis 120V (50Hz/60Hz/400Hz), 100V bis 240V (50Hz/60Hz, ±10%) auto-ranging Stromversorgung Abmessungen 381mm x 204mm x 142mm 3.9Kg Gewicht Das hier angebotene Gerät/System wurde getestet und ist voll funktionsfähig und einsatzbereit.