Agilent 0100-1851 CER Stator Face Seal assembly for p/n 0101-0921 Valve

14 x Fylde Transducer Amplifier 379TA Job Lot All items are in good cosmetic condition with minimal  (more)wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. This job lot includes the following: 14 x Fylde Transducer Amplifier 379TA Model: 378TA

Cambridge Instruments Stereoscan 360 SEM This system was removed from a university laboratory where  (more)it was surplus to requirements. The microscope is semi-functional. Images can be obtained using the backscatter detector. Some panels have been removed, and the item has been stripped down to parts. We are unable to test this system, due to limitations at our facility. System Includes: - Cambridge SEM Stereoscan chamber - Cambridge Stereoscan 360 console - Cambridge power supply - Edwards 8 two-stage pump - Cambridge Stereoscan 360 manual - Pallet of paneling - Pallet of accessories - Turbo pump - ISS Group i-Scan (powers on) - ACER 19" Monitor (powers on) - Edwards 8 Two Stage Pump, Model: E2M8, SN: 26053 (powers on) - Stereoscan 360 Operator Manual - Stereoscan 360 Circuit Diagram Manual - Video Converter Video to VGA - Leitz Wetzlar Polaroid (No. 543 624) - Rodenstock Rodagon 1:5.6 F-80mm (10830223) - Orange fittings - Pfeiffer Balzers Turbo Pump, Type: TPH 170, SN: PM P01 210 AH2145 Model: Stereoscan 360 Serial No.: 360-13-02

Adam Equipment SAB 225I Solis Semi-Micro Analytical Balance, 82g/220g, 0.01mg/0.1mg Capacity 62g /  (more)120g Readability 0.01mg / 0.1mg Repeatability 0.02mg / 0.1mg Features - High-resolution graphic display is amply sized for clear visibility - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Large, grade 304 stainless steel pan allows swift cleaning - RS-232 interface provides speedy connection to computers and printers - External calibration allows for verification and adjustment with weights ("I" models feature internal automatic calibration) - Selectable digital filtering helps minimize effects of vibration and disturbances - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Multilingual display permits use in various regions - Check weighing with audible alarm - Parts counting with preset sample sizes - Security slot for optional lock and cable to help prevent theft The Adam Equipment Solis Analytical and Semi-Micro Balances are ideal for research and quality assurance labs, science education, precision counting, production, and manufacturing applications needing precision results. Users can readily view the comprehensive data on the amply sized graphic display. A multilingual display capability permits use of the balance in various regions, while recognizable icons help the weighing process flow smoothly. Formulation is simplified, as Solis stores up to 99 ingredients. The Solis keypad is simple to use, with easy-to-read buttons and helpful navigation arrows for uncomplicated operation. Solis models offer capacities from 120g to 510g and readabilities from 0.01mg/ 0.1mg to 0.0001g. The Solis Analytical and Semi-Micro Balances provide an outstanding solution for a variety of lab applications. INCLUDED: The Adam Equipment SAB 225I Solis Semi-Micro Analytical Balance, 82g/220g, 0.01mg/0.1mg includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Ohaus AX225D Adventurer Semi-Micro Analytical Balance, 102 g/220 g, 0.00001 g/0.0001 g Maximum Capac (more)ity 102 g / 220 g Readability 0.00001 g / 0.0001 g Repeatability (Typical) 0.00002 g / 0.0001 g Features - AutoCal™ ensures precise, consistent calibration with no manual effort - Compact draftshield provides easy access and reduces bench space - 4.3" touchscreen offers intuitive controls and adjustable brightness - USB ports enable seamless data transfer and regulatory compliance - Stainless steel pan ensures long lasting durability across research applications - Power-saving features reduce energy use and operational costs - Real-time clock supports GLP/GMP compliance with accurate timestamps - User management secures data with three customizable access levels The Ohaus AX225D Adventurer Semi-Micro Analytical Balance, 102 g/220 g, 0.00001 g/0.0001 g, offers unmatched precision and versatility for demanding laboratory applications. Featuring AutoCal™ technology, it delivers consistent, hands-free calibration to ensure reliable results. The compact draftshield design optimizes bench space while providing easy access for larger vessels. Its 4.3" full-color touchscreen offers intuitive navigation and adjustable brightness for user convenience. With dual USB ports, seamless data transfer meets regulatory traceability requirements. The durable stainless steel pan is built to withstand rigorous use, while power-saving features reduce operational costs. A real-time clock supports GLP/GMP compliance with accurate timestamps, and the user management system offers secure, customizable access for enhanced data control. This balance is an ideal solution for research, education, and industrial environments.INCLUDED: The Ohaus AX225D Adventurer Semi-Micro Analytical Balance, 102 g/220 g, 0.00001 g/0.0001 g includes: - Wind Ring - Draftshield - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Wesemann / Door cabinet ,  RT / White /  600x870x530

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Powerful stirring for your lab reactions AREC 7 features state-of-the-art heating plate technology,  (more)designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC 7 for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC 7 stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC 7 to the Cloud Ermes system.

This was removed from a university lab where it was surplus to requirements. It is sold for spares/r (more)epairs as the wiring has been deemed unsafe.

Benchmark Rotating Mixer with Rotisseries Speed Variable, 1 to 40 RPM Tilt Angle Variable, 0° to 9 (more)0° Timer 1 sec to 99 hrs 59 min, continuous Features - Variable speed control: 1 to 40 RPM. - Adjustable tilt angle: 0° to 90°. - Capacity: 12x50ml, 20x15ml, 48x2.0ml tubes. - Three rotisserie tube holders included. - Rubber-coated holders for stable mixing. - Reversing mode for thorough mixing. - Size: 8.25 x 10.5 x 12.5 in (21 x 27 x 32 cm). Your browser does not support the video tag. The Benchmark Rotating Mixer provides gentle to vigorous mixing of laboratory samples up to 50ml. With adjustable speed control and tilt angle, the Rotating Mixer is ideal for a variety of applications, from mixing blood samples to the preparation of homogenous dispersions. Three rotisserie tube holders are included for mixing all common laboratory sample tubes and each individual tube holder is rubber coated to provide a secure grip, preventing any “wobble” or loosening during mixing at high speeds. For more intense mixing, a unique reversing mode is available. In reversing mode, the mixer rotates for up to 360° then stops and rotates in the reverse direction. This back and forth motion occurs repeatedly until the set time has expired.INCLUDED: The Benchmark Rotating Mixer with Rotisseries includes: - Three Rotisserie Tube Holders (12 x 50ml, 20 x 15ml, and 48 x 1.5/2ml) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with CoverThe Scilogex Aluminum Alloy Rotor with cover ha (more)s the capacity to accomodate 24 x 1.5/2mL tubes and can a reach maximum speed of 15,000RPM. For use with the D3024 & D3024R centrifuges. INCLUDED: The Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with Cover includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus 30400158 Modular Heat Block, 30 x 6 mm Tubes The Ohaus 30400158 Modular Heat Block, 30 x 6 mm  (more)Tubes is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400158 Modular Heat Block, 30 x 6 mm Tubes includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.