Yamato MB-800-115V Magnetic Stirrer 70~1200 Rpm 115V with External Transformer. Suitable For Bo500 Oil Bath.

Magfuge HEATHROW Centrifuge / Magnetic Stirrer - Gray / Purple New equipment in its original packagi (more)ng 3L centrifuge and magnetic stirrer in one device Part Number: 120581 Dimensions: 23.5 x 18.5 x 12 cm Ambient conditions: Use temperature: 2 to 40°C Weight: 1.85 kg Color: Gray / Purple Stirrer detail: ø plate: 130 mm Stirring capacity: 3 l Speed: 50-999 rpm (increment of 1); 1000-2500 rpm (increment of 5) Timer: Stirring mode -> 30 seconds to 60 minutes or continuous (5 second increment) Oscillation mode -> 1 second to 60 minutes or continuous Oscillation mode -> 30 seconds to 15 minutes Centrifuge detail: Rotor 12 tubes 1.5/2ml or rotor 6 tubes 5ml Speed: 500-999 rpm(increment of 1); 1000-5000 rpm (increment of 5); 5000-12500 rpm (increment of 25) Timer: 30 seconds to 30 minutes (5 second increment) Delivered with : a rotor for magnetic stirring 1 rotor for 12 tubes of 1.5/2 ml 1 rotor for 6 tubes of 5 ml 12 adapters for 0.2 ml tubes 12 adapters for 0.5 ml tubes 2 PTFE magnetic bars 40 x 12 mm 2 silicone mats suitable for the magnetic stirring lid AC adapter

Yamato LR-500AA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V Speed Range  (more) 34~340rpm Max Torque 1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples)Set includes stand, rod, stainless steel shaft and 75mm 4-blade propeller. INCLUDED: The Yamato LR-500AA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V includes: - Stand and Rod - Stainless Steel Stirring Shaft - 75mm 4 Blade Propeller - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA I-MAG Industry stirrer Speed Range 100 - 1500 RPM Stirring quantity max. per stirring position ( (more)H2O) 300 l Setting accuracy speed 10 rpm Features - Drive with very high IP protection class 64: unrestricted use even under harsh environmental conditions thanks to enclosed stainless steel housing - Electronically controlled motor for very stable speeds even under load for reproducible results - Secure and ergonomic mounting of the controller directly on the vessel or with a stand rod using the I-MAG UHC universal holder (available as accessory) - Multilingual menu navigation I-MAG is a powerful yet compact magnetic stirrer for applications in laboratory and production environments. In combination with the I-MAG SP set-up frames for large vessels, which are available as accessories, up to 300 liters of water can be mixed efficiently. The wired operating unit (controller) ensures convenient handling and simple integration into e.g. process engineering systems. The robust drive unit (IP protection class 64) consists of the high-torque and wear-free motor and the magnetic coupling with high-performance neodymium magnets. This enables the effective mixing of viscous media as well as mixing in vessels with a larger distance between the installation surface and the stirring rod (e.g. double-walled containers or vessels with insulated bottoms). In order to reliably achieve high speeds even under difficult conditions, I-MAG has an adjustable start-up speed that prevents the magnetic stirring bar from breaking off during the acceleration phase. Process reliability is additionally achieved by the integrated detection of the magnetic stirring bar coupling. In the event of a tear-off or failure of the magnetic coupling, the user is informed via the operating unit. The I-MAG controller has a variety of digital and analog interfaces. Equipped in this way, the device can, for example, be controlled with a foot switch or operating button or can be integrated into a network via USB/LAN/WIFI. With appropriate software (for example labworldsoft® 6), I-MAG can thus be integrated into an automated plant process.INCLUDED: The IKA I-MAG Industry stirrer includes: - I-MAG Industry stirrer - IKAFLON 90 slide (1 pc.) - USB A-B Cable - Adapter for analog interface (3 pcs.) - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heidolph Hei-TORQUE Core Overhead StirrerThanks to its weight of 2.3 kg, the Hei-TORQUE Core is easi (more)er to carry than the other models and can be mounted on a stand and/or in various closed systems. However, this does not mean that this stirrer will be less powerful.The additional name “Core” emphasizes that it is a model of selected functions and important safety features that provide tangible help with any stirring task. Above all, the Hei-TORQUE Core scores with its simple operation: The quick-action chuck (Quick Chuck) can be opened and closed very easily without a key. The “Max” button allows you to reach the maximum speed of 2,000 rpm in no time. Thanks to the display, you can keep an overview of all application parameters.The Hei-TORQUE Core has a quick-action chuck with a diameter of 10.5 mm and can therefore be combined with a variety of stirring tools. To achieve the best possible homogeneity, it is suitable for viscosities up to 10,000 mPas or volumes up to 25 liters (H2O). *Stand, clamp, and impeller are sold separately* Click Here to View Product Video INCLUDED: The Heidolph Hei-TORQUE Core Overhead Stirrer includes: - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Benchmark Analog Hotplate Magnetic Stirrer Benchmark hotplate stirrers feature an exceptionally dura (more)ble, chemical resistant white ceramic work surface. Their space-efficient design (8 x 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods. Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of speed and temperature. Safety indicator LED’s on the front panel indicate when the heating and stirring functions have been activated. With a square 7.1 in work surface, this hotplate stirrer is compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. This unit comes complete with a support rod for mounting thermometers and temperature probes. INCLUDED: The Benchmark Analog Hotplate Magnetic Stirrer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Used in Beckman Coulter J2, J6, and Avanti J Series Centrifuges Maximum speed: 10000 rpm Maximum sol (more)ution density: 1.2 g/mL Maximum allowable imbalance of opposing loads: 10 grams Capacity: 6x 500 mL Rotor material: aluminum Weight: 19 kg

F1 Mass Standard - knob weights without adjustment chamber - set (1 g - 1 kg), plastic box Number of (more) pieces in the set: 13

Ethernet cable (M12 4P connector). Standard cable length: 3 m Compatible with: Scales operated via P (more)UE H315 terminal PUE H315 terminal MWSH weighing module MWLH weighing module