Scilogex SCI340-Pro Circular LCD Digital Magnetic Hotplate Stirrer, ceramic plate, with PT1000 Sensor & Sensor Stand

Multiposition magnetic stirrer MULTISTIRRER 15 digital Velp The MULTISTIRRER Digital series is one o (more)f a kind and represents the state of the art of multi-position stirrers, being equipped with both a digital display, in order to be able to precisely set the stirring speed, and a timer. The Timer: used as a countdown with consequent automatic shutdown or for an inversion of the rotation, automatically and based on the time interval pre-set by the user. The display: digital, which allows a precise setting of the stirring speed, reaching the speed of 1500 rpm with 10 rpm steps. SpeedServo™ system: ensures a constant speed even when the viscosity varies (counter-reaction). The worktop: in stainless steel to ensure unparalleled resistance and thorough cleaning. The MULTISTIRRER Digital remain cold even after several days of operation, a highly appreciated feature in microbiology and biochemistry. Samples can also be thermostated by combining the stirrer with a recirculating water bath. ROBUST AND PRACTICAL - The control panel is protected from liquid spills - Heavy duty steel construction with epoxy coating - Stainless steel cover - Very low height - ergonomic - Lightweight, easy to move - Designed for maximum durability and backed by a 3 year warranty THE ADVANTAGES OF THE VELP MICROSTIRRER - Clear surface for viewing particles and color changes - Intermittent mode schedules to suit your workflows - It doesn't get hot, even after days of continuous use - Can thermostat samples using a recirculating water bath - Ideal for microtitration, microbiology and biochemistry - Soft start but quick achievement of the set speed - High power magneto 'PCM' driven by single phase motor for continuous operation - Timer from 1 to 900 minutes; continuously - Rotation reversal: 5 to 900 seconds

BEST SELLER SINCE 1983 In laboratories all over the world, from universities to research centers and (more) industrial laboratories, you can find an ARE Velp magnetic stirrer. Thanks to the 5 series version, Velp renews once again one of their flagship products. RESISTANCE, SAFETY AND PERFORMANCE The plate of the ARE 5 Velp model is IP42 certified and is made of aluminum alloy, with a diameter of 135 mm, which guarantees a homogeneous temperature and optimal heat transfer over the entire surface. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, an indicator light remains on until the plate temperature drops below 50°C. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). ARE 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. PRECISE SHAKING ARE 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 15 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. APPLICATIONS ARE 5 is the ideal solution for temperature sensitive applications in many industrial sectors and academic laboratories. THE ARE CONTROL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 100 to 1500 rpm. COMPARISON TABLE OF THE ARE 5 VELP MODELS:

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato LR-500AA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V Speed Range  (more) 34~340rpm Max Torque 1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples)Set includes stand, rod, stainless steel shaft and 75mm 4-blade propeller. INCLUDED: The Yamato LR-500AA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V includes: - Stand and Rod - Stainless Steel Stirring Shaft - 75mm 4 Blade Propeller - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V Speed Range 30 rpm to 2,000 rpm Capacity 2 (more)5 L Maximum Viscosity 25,000 mPas Features - Powerful mixing and constant speed is assured with the brushless motor and torque compensation technology - Delivers accurate, controlled stirring of viscous liquids with quiet operation. - Simplify set up with the Keyless Chuck - no tools required. - Change shafts quickly and easily with one handed operation. This unique design will save time and effort for everyone in the lab. - Designed for safety. The lock button prevents accidental speed changes and the motor’s overload sensing technology simply shuts off stirring before an overload condition occurs to protect the sample. - Compact and easy to use. - Simple knob control combined with the bright digital display allows for precise setting and monitoring. - Customize for your application with over 12 accessories. The OHAUS e-A51ST040 Achiever 5000™ Overhead Stirrer is designed for powerful, precise stirring, safety, and simplicity in your lab applications. The A51ST040is a versatile overhead stirrer ideal for various applications in laboratories across industries like food & beverage, cosmetics, paints & coatings, pharmaceuticals, and more. INCLUDED: The Ohaus e-A51ST040 Achiever 5000 Overhead Stirrer, 115/230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RT 5 Multiposition Magnetic Hotplate Stirrer Stirring Positions 5 Positions Speed Range 0 to 1, (more)000 RPM Heating Temp. Range Room Temp. to 120°C Features - Combines RCT basic magnetic stirrer with ETS-D5 contact thermometer. - Safety circuit limits max. temp. independently of set point. - Heating function switches off if temp. limit exceeded. - Set safety temp. of heating plate remains available. - Hotplate temp. displayed on RCT. - Contact thermometer display can be placed at eye level. The IKA RT 5 Multiposition Magnetic Hotplate Stirrer is a 5-position digital stirrer designed for synchronous heating and stirring. It combines the RCT basic magnetic stirrer with the ETS-D5 contact thermometer, featuring a safety circuit to limit maximum temperature independently of the set point. The heating function switches off if the temperature limit is exceeded, ensuring safety. With magnetic coil technology, it provides noiseless and consistent stirring up to 1000 rpm, and its surface temperature is adjustable up to 120 °C. It supports a maximum stirring quantity of 0.4 liters per position (H2O). The stirrer has a durable aluminum alloy set-up plate measuring 110 x 495 mm, and the unit measures 120 x 60 x 610 mm, weighing 4 kg. Suitable for continuous operation, it includes an adjustable safety circuit (50 - 150 °C), operates within 5 - 40 °C, and has an IP 40 protection class.

Sanyo MCO-20AIC CO2 This was removed from a university lab where it was surplus to requirements. It  (more)is in good cosmetic condition and powers up, it has been tested with a digital thermometer (not included). The current CO2 Pump failed during testing and will require a new one to be fitted. Therefore, it is listed as Spares/Repair.

This JEOL JEM2011 is being sold on behalf of a university lab where it was surplus to requirements.  (more)The system is was decommissioned in August 2023. The scintillator in the Gatan Multiscan Camera is coming to the end of its life and the Oxford EDX system has not been used in a very long time as the lab was unable to source a PC with the right connectors to support it. The pole piece is URP22_11. The system has now been decommissioned by JEOL and is ready for collection in Fife, Scotland. - JEOL JEM2011 transmission electron microscope, 200 kV operation, LaB6 or W filament - Oxford INCAx-sight/Oxford Link ISIS EDX system - Gatan Multiscan 794 CCD camera, 1024 x 1024 pix The system is sold for spares. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-3 interfaces: 2 x RS232, USB, Ethernet, 12 IN, 12 OUT (digital). It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.

Ohaus MB90 Moisture AnalyzerMeasuring moisture content has never been easier than with the MB90 Mois (more)ture Analyzer. The MB90’s halogen heating distributes heat uniformly over the sample and speeds up the drying process—delivering fast and precise measurements. Designed for tool-free cleaning, the MB90’s components can be easily removed for quick and easy maintenance. Operating the MB90 is intuitive with the icon-driven menu navigation on the touchscreen display.Features include: - The MB90’s precisely controlled halogen heating dries samples quickly and ensures uniform heating to yield fast, precise and repeatable results of 0.01% readability. - Designed with effortless maintenance in mind, the MB90 features a removable pan handler and heating chamber components that make cleaning quick and easy—no tools needed. - Icon-based menu navigation on the easy-to-read touchscreen display makes operating the MB90 intuitive. Perform routine sample testing in three easy steps—no training required. Click Here to View Product Video INCLUDED: The Ohaus MB90 Moisture Analyzer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty