Scilogex Paddle Stirrer 316L

Powerful stirring for your lab reactions AREC features state-of-the-art heating plate technology, de (more)signed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC to the Cloud Ermes system.

Magnetic Stirrer with Heating FISHER SCIENTIFIC Lab-Mix Temp Basic Model: FISHERBRAND Lab-Mix Temp B (more)asic Max. stirring capacity H₂O: 20 L Temperature range: 50…300 ºC. Rotation speed: 100 to 1400 rpm. Heating plate dimensions: Ø 150mm Weight: 6Kg Technical specifications: 230 V, 50-60 Hz 825W With Heidolph EKT 3001 Contact Thermometer With probe

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

AM4 Digital is the solution for laboratories that need precise control of sample temperature and max (more)imum reproducibility. Among its qualitative features we can find the possibility of connecting the Pt100, Pt1000 probes and the VTF digital thermoregulator, for accurate and direct control of the sample temperature. The CerAlTop™ plate, in aluminum alloy covered with a ceramic layer, guarantees a homogeneous and fast heat transfer over the entire surface, as well as high resistance to chemical agents and scratches. Designed to last and give you the comfort you need in the laboratory, the AM 4 Digital Multi-Position Magnetic Stirrer is covered by a 3-year warranty (online product registration required). In short: - Ceramic coated aluminum alloy - Electronic speed regulation up to 1500 rpm. - Stirring volume (H2O) up to 20 liters per position. - Temperature up to 310°C. - Connections for PT100, PT1000 and VTF 1 - Aluminum alloy plate with ceramic coating  2 - Main switch 3 - Speed ​​control knob 4 - Temperature control knob 5 - Visualization A - Probe LED B - Temperature setpoint LED The powerful brushless motor ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The consistently precise stirring speed, from chemical reactions to sample preparation, is adjustable from 50 to 1500 rpm for volumes up to 20 liters (H2O). The LED displays will always allow you to easily read the values, from any angle. For maximum precision, by connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C up to a maximum of 300°C. In this regard, various accessory packages are available. You will find all the combinations at the bottom. Safety during heating: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm The new spherical caps replace the oil baths and heating mantles. They adapt perfectly to both the 135 mm plate and the shape of the tubes, ensuring rapid heat transfer. To improve protection and reduce heat loss, VELP has designed new PTFE covers. The MultiAlublock™ and new MonoAlublock™ solutions are ideal for carrying out multiple stirring and heating analyzes in laboratories with limited space and time. Download the dedicated brochure for the complete list.

This model is particularly suitable for simple mixing tasks. In short-term operation mode, the shaki (more)ng motion is triggered by pressure on the test tube tray. This mode is suitable for mixing up solutions, for example. Persistent cell pellets can be dissolved gently but powerfully in continuous operation. With a speed of up to 2400 rpm and a shaking orbit of 5 mm, reliable and uniform distribution of solids, and homogenization of highly viscous media are guaranteed. Motion: vibrating Rotation speed range: 200 – 2400 rpm Operating Mode: automatic or continuous Orbit/Stroke: 5 mm

The Qubit fluorometer uses the very latest in illumination and detection technology for the highest  (more)sensitivity, you can use as little as 1 µL of sample and still get great results, even with very dilute samples. Dynamic range: 5 orders of magnitude Light sources: Blue LED (max ~460 nm), Red LED (max ~635 nm) Excitation filters: Blue 400 – 490 nm, Red 570 – 645 nm Emission filters: Green 510 – 580 nm, Red 655 – 725 nm Photodiode detectors: 300 – 1000 nm Calibration: 2 or 3 point standard Tube type: 500 µL clear tubes Warm up time: 2 sec Dimensions: 114 x 166 x 46 mm Weight: 219 g

This Sanyo MIR 553 Refrigerated Laboratory Incubator was removed from a university lab where it was  (more)surplus to requirements. The unit is in good cosmetic condition with only limited usage marks. It has 4 shelves and a key with it. It powers up and has been tested with a digital thermometer (not included). When set at the lowest temperature of -15ºC our thermometer read 0.8ºC (The unit's internal thermometer read -0.2ºC)When set at 37.5ºC our thermometer read 38.2ºCWhen set at 50ºC our thermometer read 50.6ºC The lamp inside is in working order, but the exterior lamp doesn't seem to work. It may need a new lamp. Interior dimensions:D53cm x W65cm x H128cm

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. * RFID ISO/IEC 14443 Type A, 13.56 MHz