Scilogex MS-PB Analog Circular Magnetic Stirrer

Magfuge HEATHROW Centrifuge / Magnetic Stirrer - Gray / Purple New equipment in its original packagi (more)ng 3L centrifuge and magnetic stirrer in one device Part Number: 120581 Dimensions: 23.5 x 18.5 x 12 cm Ambient conditions: Use temperature: 2 to 40°C Weight: 1.85 kg Color: Gray / Purple Stirrer detail: ø plate: 130 mm Stirring capacity: 3 l Speed: 50-999 rpm (increment of 1); 1000-2500 rpm (increment of 5) Timer: Stirring mode -> 30 seconds to 60 minutes or continuous (5 second increment) Oscillation mode -> 1 second to 60 minutes or continuous Oscillation mode -> 30 seconds to 15 minutes Centrifuge detail: Rotor 12 tubes 1.5/2ml or rotor 6 tubes 5ml Speed: 500-999 rpm(increment of 1); 1000-5000 rpm (increment of 5); 5000-12500 rpm (increment of 25) Timer: 30 seconds to 30 minutes (5 second increment) Delivered with : a rotor for magnetic stirring 1 rotor for 12 tubes of 1.5/2 ml 1 rotor for 6 tubes of 5 ml 12 adapters for 0.2 ml tubes 12 adapters for 0.5 ml tubes 2 PTFE magnetic bars 40 x 12 mm 2 silicone mats suitable for the magnetic stirring lid AC adapter

Complete system with OHS 60 Digital, A00000366 Universal H-Stand, A00001307 Stainless steel helix st (more)irring rod, A00001301 Double clamp. OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 degree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

Yamato LR-500AA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V Speed Range  (more) 34~340rpm Max Torque 1.96/N•m (20/kgf•cm) Motor DC Brushless Motor 70W Features - DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required - Direct-drive system reduces noise and require low maintenance - Achieves high torque enabling stirring of high viscosity solution - Digital tachometer for easy speed setting and confirmation - Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically - Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples) Digital laboratory stirrer with speed range of 34-340 rpm for high viscosity samples. DC brushless motor considered superior in safety as there are no brushes to cause sparks and no brush replacement required. Direct-drive system reduces noise and require low maintenance. Achieves high torque enabling stirring of high viscosity solution. Digital tachometer for easy speed setting and confirmation. Load on the stirring shaft can be monitored by LED2 display. An overload lamp turns on when exceeding the maximum load, stopping the motor automatically. Revolution feedback control function can maintain the setting rate despite change of load (especially suitable for high viscosity samples)Set includes stand, rod, stainless steel shaft and 75mm 4-blade propeller. INCLUDED: The Yamato LR-500AA Complete Overhead Stirrer with Stand & 75mm 4-Blade Propeller, 115V includes: - Stand and Rod - Stainless Steel Stirring Shaft - 75mm 4 Blade Propeller - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Ohaus Guardian 7000 e-G71HSRDM Hotplate Stirrer, 120V The Ohaus Guardian 7000 Hotplate Stirrers are  (more)designed with outstanding safety features and superior heating and mixing performance. The SmartHousing is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled glass control panel. The bright LCD display includes intuitive icons, temperature, speed and time settings - all designed to monitor performance from across the lab. Protect your lab with SmartPresence and SmartLink technologies. These exclusive features automatically shut off the heater if no one is detected after a user set “time out” period has passed. An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 RPM is made possible by the design of a powerful motor, strong magnet and software-controlled ramp rate, ensuring secure magnetic coupling for viscous applications. SmartHeat allows you to set the maximum temperature of the unit and SmartRate enables fast or slow temperature and speed ramp rates. The programming feature allows storage of 5 multi-step programs. INCLUDED: The Ohaus Guardian 7000 e-G71HSRDM Hotplate Stirrer, 120V includes: - Two Stir Bars (40 x 8mm and 28.6 x 8mm) - 8" Stainless Steel RTD Temperature Probe - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA RW 28 Digital Mechanical Overhead Stirrer Speed Range 60 to 1,400 RPM Viscosity Max. 50,000 mPas (more) Stirring Quantity Max. 80 l Features - Digital speed display - Infinitely adjustable speed from 60 to 1400 rpm in twospeed ranges - Push-through agitator shafts - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Powerful, mechanically controlled laboratory stirrerdesigned for highly viscous applications for quantities up to 80 l (H2O). It issuitable for intensive mixing for use in laboratories and pilot plants. Thestirrer comes equipped with a protection for overheating of the motor by meansof self-locking temperature limiter. Additionally, to secure bowls, a stirringshaft protection and clamping fixture are optionally available.

IKA Ministar 40 Control Overhead Stirrer Speed Range 0/30 to 1000 RPM Viscosity Max. 30,000 mPas St (more)irring Quantity Max. 25 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 30,000 mPas and volume of up to 25 l - Continuously adjustable speed between 0/30 – 1,000 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The IKA Ministar 40 Control Overhead Stirrer from the new MINISTAR series combines high performance with cutting-edge technology in a compact design. Ideal for special applications, this high-tech stirrer requires minimal space and offers a lifetime guarantee. It features a hardened glass-enclosed, fast response LCD display for maximum visibility and chemical resistance. State-of-the-art vibration sensors automatically stop the process if deviations from permissible thresholds are detected. The stirrer is equipped with an integrated timer/counter for controlling kinetic-sensitive reactions and reminders, handling viscosities up to 30,000 mPas and volumes up to 25 liters. Click Here to View Product Video INCLUDED: The IKA Ministar 40 Control Overhead Stirrer includes: - MINISTAR 40 control - R 300 shaft protector - Fasten screws for R 300 (2x) - H 67.60 Temperature sensor, stainless steel - Chuck Key - USB Cable - USB A to Micro-B, 2 m - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 8 Year Warranty Extension with IKA Registration) IKA Ministar 40 Control Overhead Stirrer Specifications Stirring quantity max. per stirring position (H2O)25 lMotor rating input60 WMotor rating output46 WMotor principleBrushless DCSpeed displayLCDSpeed range0/30 - 1000 rpmViscosity max.30000 mPasOutput max. at stirring shaft42 WPermissible ON time100 %Torque max. at stirring shaft40 NcmSpeed controlTurning knobSetting accuracy speed1 ±rpmDeviation of speed measurement n 300rpm1 ±%Deviation of speed measurement n < 300rpm3 ±rpmStirring element fasteningchuckConnection for ext. temperature sensorPT1000 Temperature displayyes Chuck range diameter0.5 - 8.2 mmHollow shaft, inner diameter8.5 mmHollow shaft (push-through - when stopped)yesFastening on standextension armExtension arm diameter13 mmExtension arm length160 mmTorque displayyesSpeed controlelectronicNominal torque0.4 NmTorque measurementtrendDeviation of torque measurement I4 ±NcmTimeryesTimer displayLCDTime setting range1 - 6000 minTemperature measuring range-10 - 350 °CTemperature measurement resolution0.1 KAccuracy of temperature measurement±0.5 + tolerance PT1000 (DIN EN 60751 Class A) KLimit deviation temperature sensor≤ ± (0.15 + 0.002xITI) KHousing materialalu-cast coating / thermoplastic polymerCommunication distance (depend onbuilding) max.150 mDimensions (W x H x D)70 x 193 x 154 mmWeight1.72 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54USB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input69 WDC Voltage24 VCurrent consumption2900 mAComparison of ModelsSpecificationsMinistar 20 ControlMinistar 20 DigitalMinistar 40 ControlMinistar 40 DigitalMinistar 80 ControlMinistar 80 DigitalStirring Quantity Max. (H2O)15 l15 l25 l25 l50 l50 lMotor Rating Input60 W60 W60 W60 W60 W60 WSpeed DisplayLCDLEDLCDLEDLCDLEDSpeed Range0/50 - 2000 rpm0/50 - 2000 rpm0/30 - 1000 rpm0/50 - 1000 rpm0/30 - 500 rpm0/50 - 500 rpmViscosity Max.10000 mPas10000 mPas30000 mPas30000 mPas60000 mPas60000 mPasTimer DisplayLCDNoneLCDNoneLCDNoneTemperature DisplayYesNoYesNoYesNoDimensions (W x H x D)70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mm70 x 193 x 154 mm70 x 193 x 147 mmUSB InterfaceYesYesYesYesYesYesVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }DownloadsTechnical Specification Download Operator's Manual Download Request a Formal Quote

Gilson Microman M100E Pipette, 10-100ul The ergonomically designed MICROMAN® E positive displacement (more) pipettes, along with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: - Viscous solutions—difficult to aspirate and stick to pipette tips. - Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. - Cold liquids—delivered in excess amounts. - Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination. INCLUDED: The Gilson Microman M100E Pipette includes: - Operator's Guide - One Year Manufacturer's Warranty

Temperature range: -18°C to -26°C Dimensions (HxWxD): 1750 x 655 x 640 mm Internal dimensions (HxWxD (more)): 1480 x 450 x 360 mm Capacity: 263 L

The BTX HT-200 plate handler allows for the Highthroughput System HT 25 or HT 96 for advanced molecu (more)lar delivery. The HT 96 (96-well) plates or the HT 25 (25-well) plates can be electroporated using a BTX generator (models: ECM 830 and ECM 630) with a plate handler. The Model HT-200 automatically switches columns in a Multi-well plate during electroporation using the Auto-track sensing featute. The Auto-track sensing allows rapid electroporation of an entire plate by setting up all columns and pressing one button. Voltage Range: 0 to 3000V DC Pulse Length Range: 10 µsec to 10 sec Pulse Number Range: 1 to 99 Dimensions (WxDxH): 230 x 215 x 140 mm Weight: 4.8 kg Including: 1x 96-Well Disposable Electroporation Plates, 4 mm, 250 µl, pkg. of 1 1x 96-Well Disposable Electroporation Plates, 2 mm, 125 µl, pkg. of 1 1x HT 25-Well Adapter for Plate Handler

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW