OHS 200 Advance Overhead Stirrer VELP

Dansensor Ametek Check Point 3 O2 Mocon Dansensor Portable gas analyzer for quality control of your  (more)packaging under protective atmosphere (MAP) With needle Brand AMETEK MOCON Model: CheckPoint 3 O2 Year of manufacture: 2017 With accessories Sampling volume: 5ml Sampling time: 7s

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

iGAM Sound Proof Cabinet Enlosure Box This was removed from a university lab where it was surplus to (more) requirements. It is in good cosmetic condition, but has not been tested.

This Orbit Marine AL-7100-LCU Local Control Unit was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition with marks from use. The client informed us that it is functional.

This Orbit Marine AL-7100-LCU Local Control Unit was removed from a university lab where it was surp (more)lus to requirements. The unit is in good cosmetic condition with marks from use. The client informed us that it is functional.

Limpsfield LCNP15 Natural Gas 1305 Kw Burner with Autoflame Control System This item was removed fro (more)m a university where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LCNP15Serial No. 01160Manufactured 30.05.14Output 1303Kw/hr With Autoflame Combustion Management SystemPart Nos. 2 x MM10005, Serial Nos. 12294, 12331 Siemens Ignition Transformer Type ZE 23/8.5 Dungs LGW 50 A4 pressure switch WEG W22 7.5hp 415 volt fan motor Caldaia A Condensazione high limit cut-off control 2.0" gas inlet pipe

This listing is for a Pall Allegro 1/2" Single Use TFF System.The unit is in full working condition  (more)and is ready for immediate release.This Unit is fitted with a Ismatec Flowmaster FMT 300 peristaltic pump.This unit is supplied with Trolley and containers.The Pall Allegro 1/2" Single Use TFF System is a cutting-edge solution designed specifically for tangential flow filtration (TFF) in bioprocessing applications, combining innovative single-use technology with user-friendly design. Unlike traditional TFF systems, the Allegro system incorporates new concepts that enhance ease of use and efficiency, featuring a carefully considered layout that allows full access to components from one side.Key Features:Single-Use Design: Eliminates cross-contamination and cleaning requirements, enhancing system flexibility and ensuring a sterile environment.Integrated Sensors: Equipped with single-use sensors that track key process parameters, provide notifications for out-of-spec conditions, and enable automated control for optimal processing.Easy Setup: Comes with five pre-irradiated manifold sets (feed, retentate, permeate, bio container, recovery) that are ready for installation, typically taking just 20 minutes.Automated Operation: Fully automated for monitoring and controlling critical parameters, ensuring consistent performance throughout ultrafiltration and diafiltration processes.Technical Specifications:Capacity: Features a recirculation pump with a capacity of 1,000 L/hour, designed to accommodate 0.5 - 2.5 m² cassettes running at a crossflow of 5 L/min/m².Versatile Connections: Easily connects to Allegro 2D and 3D bio containers for WFI, diafiltration buffer, and process fluid in fed batch operations.Temperature Control: Includes a heat exchange plate under the retentate bio container to manage product temperature, either cooling or heating as needed.Applications:Ideal for concentration and diafiltration of proteins, recombinant molecules, potent biological drugs, cytotoxic drugs, and vaccines, the Pall Allegro system stands out as a reliable and efficient choice for modern bioprocessing needs.Brochure- http://g-eitan.com/pdf/Biotechnology/Ultrafiltration%20-%20TFF/Single%20use%20cross%20flow%20system/SingleUseTFF.pdf

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

VACUUBRAND ME 4C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar (52 torr) Maximum Pumping Spee (more)d 2.6 cfm at 60Hz Number of Heads/Stages 2/1 Features - Outstanding chemical resistance - High performance even at low vacuum levels - Whisper quiet - Low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life. The NT-series features further improved performance data, higher tolerance for condensates and simplified maintenance. The ME 4C NT is also available as chemistry vacuum system ME 4C NT +2AK with inlet separator to protect the pump against particles and liquid droplets, plus outlet separator to collect condensate. One-stage chemistry-design diaphragm pumps are an excellent choice for applications with corrosive gases and vapors which do not require very deep vacuum levels. They do not consume water and therefore do not produce any contaminated waste water. Typical applications are filtration as well as concentration of solvents with low boiling points. The ME 4C NT is recommended for processes which require higher flow rates. The chemistry vacuum system ME 4C NT +2AK with inlet separator and condensate catchpot is an excellent choice for rugged applications and for collecting condensates at the exhaust of the pump.INCLUDED: The VACUUBRAND ME 4C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris W3300-10K - Compact Balance, 10000 grams, readability 0.1 grams, 115V Accuris Compact balanc (more)es have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.Accuris Compact balances have been designed to meet the basic needs of academic and research labs requiring weight determinations in increments of 0.01g to 0.1 g. Their reliable and precise weighing technology utilizes gold-plated, ceramic capacitors to determine sample mass.The Compact line includes 6 models covering a wide range of maximum weight capacities. The lower capacity units (120g, 300g, and 500g) are readable to 0.01 g and come with a draft shield ring to prevent air currents from affecting measurements. These models feature a 4.5-inch diameter, stainless steel weigh pan. The larger capacity models (1000g, 5000g, and 10,000g) do not include the draft shield ring, come with larger weighing pans of 6.3 to 7-inch diameter, and are readable to 0.1g.All balances in the Accuris Compact line offer large, brightly lit LCD panels, and are easy to operate using the intuitive and splash-resistant control panel. Different modes allow weight to be displayed in various units: grams, ounces, carats, and simple programs can be used for piece counting and percent deviation weighing.Leveling feet are located toward the front of the balance for easy access, and a leveling bubble in the control panel is easy to see for quick and simple leveling on the lab bench. The balances can be calibrated using a calibration weight and a few keystrokes on the control panel – just select a calibration point in the calibration mode, place the calibration weight onto the weighing pan, and press the “CAL” button.Lightweight, and small in size, Accuris Compact balances will provide years of trouble-free service.INCLUDED: The Accuris W3300-10K - Compact Balance, 10000 grams, readability 0.1 grams, 115V includes: - Weighing Pan - Power Cord - One Year Manufacturer's Warranty