Ohaus STHVDG Digital Large Volume Magnetic Stirrer, 120V

The AM4 4-position heating magnetic stirrer features aluminum alloy heating plates carefully coated  (more)with a special protective layer to ensure even heat distribution over the entire surface, as well as excellent chemical resistance. AM4 is designed to last over time and guaranteed for 3 years. AM4X also offers the possibility of connecting up to 4 VTF and VTF EVO digital temperature controllers for direct control of the temperature of the solution being processed. - Electronic speed regulation: up to 1500 rpm - Stirring volume (H2O): up to 15 liters per position - Temperature: up to 370°C - Feedback: constant speed even when the viscosity varies PERFORMANCE Electronic speed regulation: up to 1500 rpm for each plate Temperature adjustment: from room temperature to 370°C for each plate Stirring capacity (H2O): up to 15 liters (x4) Stirring system: high force driving magnet suitable also for continuous work Feedback: constant speed

IKA Fisher Brand Color Squid Magnetic Stirrer model: Color Squid Technical characteristics: 100 – 24 (more)0 V, 4 W. Continuously adjustable speed: 0 to 1500 rpm. Tray dimensions (ø): 11 cm External dimensions (D)x(H)x(W): 130 x 135 x 50 mm Stirring capacity: 0.8 liters (H2O) Weight: 1kg

Speed I: 25 – 250 rpm Speed II: 200 – 2000 rpm Dimensions (DxHxW): 280 x 280 x 100 mm

This Stem Corporation Block Heater & Chiller  Model - RS2550 was removed from a university  (more)lab where it was surplus to requirements. The heater powers up and has been tested with a digital thermometer (not included).When set to 37˚C the display showed 37˚C and the thermometer measured 36.2˚C.When set to 55˚C (max) the display showed 57˚C and the thermometer measured 53˚C. We were unable to test the shiller as we don't have the connecting cable. The magnetic stirrer seems to be working well. 25 x 27mm diameter tube holes

Scientific Industries SI-0300 MagStir Genie Magnetic Stirrer The Scientific Industries SI-0300 MagSt (more)ir Genie Magnetic Stirrer offers stirring speeds from 10 RPM to 1,800 RPM, including interval and reverse stirring. Selectable ramping rates from 5 to 300 RPM per second for user control of sample sensitivity and preservation. Features low, medium, and high power levels. User can quickly program speed, ramp rate, stir direction, time (including pause), and power level in 9 distinct steps for up to 4 different programmed stirring profiles. This stirrer is new in the box . Includes: Operator's Manual Power Cord Full 6 month Parts and Labor Warranty Scientific Industries SI-0300 MagStir Genie Magnetic Stirrer Specifications Stir Range 10 to 1,800 RPM Maximum Stirring Capacity 2 L Timer 1 second to 99 hours Dimensions (D x W x H) 200 x 160 x 55 mm (7.9 x 6.3 x 2.2 in) Electrical Requirements 120V

IKA R 2311 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 150 mmShaft Ø: 13 mmShaft length: 800 mm INCLUDED: The IKA R 2311 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2005 Tested at 37°C and -2°C

Magnetic stirrer 6 stirring points MULTIPOINT HP 6 VARIOMAG Can shake 6 Erlenmeyer flasks at the sam (more)e time. Voltage: 20 VDC 6 stirring points Distance between stirring points: 130 mm Stirring volume: 1 – 1000 ml Selectable Speed Range: 100-700 RPM, you can adjust the speed in 50 RPM increments. Dimensions (L) x (D) x (H): 24 x 42 x 3.5 cm Weight: 8kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Water and gas connections Dimensions (WxDxH): 1250 x 765 x 960 mm

Yamato RE-202 Rotary Evaporator with Waterbath and Glassware, 115V Speed Range 5 - 315 rpm Max Cap (more)acity 2000ml Motor Type Brushless Features - Power supply: 115V - Includes BM302-A Water Bath (5L) & Glassware Set A (Traditional (diagonal)) - Comes with a speed range at 5~315 rpm - Easy height adjustment with the jack handle - Intuitive operability, wide rotation speed range - Improved durability of vacuum seal with liquid accumulation prevention structure - Cables stored neatly inside the AC adapter holder at the back of the main unit - Anti-liquid stagnation glass condenser design, which improves durability of the vacuum seal Standard rotary evaporator with slide jack mechanism for convenient height adjustment. Set includes BM302-A water bath (115V) and glassware set A with diagonal condenser. Market leader in rotation speed range at 5~315 rpm. Designed with set inversion function where glassware and bath can be set on either side, left or right, depending on user’s dominant hand and installation location. Standard equipped with condenser insulation kit to suppress condensation on the condenser’s surface.INCLUDED: The Yamato RE-202 Rotary Evaporator with Waterbath and Glassware, 115V includes: - Digital Rotary Evaporator - BM302-A Water Bath (5L) - Selected Glassware Set - AC adapter - Power cable - Bath guide - Rear cover - Single-sided tape fastener roll - Double-sided Tape fastener roll - Cooling condenser - Rotary joint - Evaporation flask - Receiving flask - Ball joint clamp - Flask clip - Vacuum seal - Condenser insulation kit - Condenser Bracket (Type B) - Hex wrench (Type B) - One Year Manufacturer's Warranty

MA X7.A moisture analyzers are hi-tech measuring instruments intended for quick determination of rel (more)ative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.