Benchmark IPS7101-150 HCS-150 High Capacity Magnetic Stirrer, 150L

MULTISTIRRER 15 Velp multiposition magnetic stirrer MULTISTIRRER 15 is a 6-place magnetic stirrer fo (more)r ø 85 mm beakers. Designed to last, these tools feature a stainless steel top that is resistant to chemical corrosion. It is possible to set a common speed up to 1500 rpm, with the electronics guaranteeing good speed regulation even at low rpm. Even after several days of operation, the instruments do not overheat, which is a highly valued feature in microbiology and biochemistry. It is possible to thermostat the samples by combining MULTISTIRRER with a recirculating water bath. ROBUST AND PRACTICAL - The control panel is protected from liquid spills - Heavy duty steel construction with epoxy coating - Stainless steel cover - Very low height - ergonomic - Lightweight, easy to move - Designed for maximum durability and backed by a 3 year warranty THE ADVANTAGES OF THE VELP MICROSTIRRER - Clear surface for viewing particles and color changes - It doesn't get hot, even after days of continuous use - Can thermostat samples using a recirculating water bath - Ideal for microtitration, microbiology and biochemistry - Soft start but quick achievement of the set speed - High power magneto 'PCM' driven by single phase motor for continuous operation

Mechanical Stirrer with Shaft IKA RW28 Model: RW 28 laboratory Stirring speed: 40 to 1400 1/min Max. (more) stirring quantity (H2O): 80 liters Input motor power: 220 W Output motor power: 90 W Max. viscosity: 50000 mPas Max. torque at stirring shaft: 900 Ncm Max. torque at stirring shaft at 60 1/min (overload): 1144 Ncm Max. torque at stirring shaft at 100 1/min: 900 Ncm Max. on the stirring shaft at 1,000 1/min: 86 Ncm Speed ​​range I (50 Hz): 60 - 400 1/min Speed ​​range II (50 Hz): 240 - 1,400 1/min Speed ​​range I (60 Hz): 72 - 480 1/min Speed ​​range II (60 Hz): 288 - 1,680 1/min With tightening key

IKA R 3004 Blade stirrer Maximum Speed ≤ 1000 rpm Flow Type Radial Material Stainless Steel Features (more) - Generates radial flow, effectively mixing material from both top and bottom - Ideal for aerating low viscosity media and homogenizing solids in liquids - Designed for medium to high speed use for versatile application needs - Compact stirrer diameter of 30 mm for focused and efficient mixing - Made from AISI 316L / 1.4571 stainless steel for superior durability and corrosion resistance - Suitable for use within a wide ambient temperature range of 5 - 40 °C, ensuring reliability under various conditions This stirrer is equipped with a 50 mm diameter and a 350 mm shaft length, designed to create an axial flow that moves media from the bottom upwards, suitable for mixing and heat exchange in medium to high viscosity substances. Constructed from AISI 316L / 1.4571 stainless steel, it offers durability and resistance to corrosion. With a weight of 0.2256 kg and an overall height of 87.7 mm, it is built for stability and ease of integration into various lab environments. The stirrer is intended for low to medium speed applications, with a maximum operational speed of ≤ 800 rpm and can be used within an ambient temperature range of 5 - 40 °C.INCLUDED: The IKA R 3004 Blade stirrer includes: - IKA R 3004 Blade stirrer - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 1385 Propeller 3 - Bladed Stirrer Flow-efficient design. For drawing the material to be mixed (more) from the bottom to the top. Minimum shearing forces. Used at medium to high speeds.Stirrer Ø: 140 mmShaft Ø: 10 mmShaft length: 550 mm INCLUDED: The IKA R 1385 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) Particularly in (more) the case of applications with very viscous media such as pastes and gels, a very reliable stirring process in the entire vessel without air entry is important. This is what the innovative stirring system VISCO JET® offers. The shape of the blades triggers an intrinsically dynamic flow, which shortens the process times with significantly better mixing results compared to conventional impellers. An all-rounder for aqueous and highly viscous substances. The VISCO JET® Crack 80 is ideal for vessels with the following characteristics: ideal vessel diameter: 133-200 mm, ideal ground clearance: 24 mm, ideal filling level: 133-200 mm, ideal volume: 1,900-6,300 ml. The VISCO JET® Crack 80 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph 036300505 Overhead Stirrer Visco Jet Crack Impeller, 80mm (Stainless Steel) includes: - 10mm Stirrer Shaft - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade Due to its blade dimensions, the p (more)itched-blade impeller PR 30 is ideal for solutions, emulsions and suspensions in vessels with the following characteristics: ideal vessel diameter: 145-290 mm, ideal ground clearance: 29-58 mm, ideal filling level: 145-290 mm, and ideal volume: 2,400-19,200 ml. The pitched-blade impeller PR 30 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300400 Overhead Stirrer Impeller, PR 30 Pitched-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Maximum RCF with fixed angle rotor: 20913 x g Maximum RCF with swing-bucket rotor: 4500 x g Maximum  (more)RCF with plate rotor: 3486 x g Speed range: 200 – 14000 rpm Temperature range: -9 °C to 40 °C Maximum capacity: 4x 750 mL/4x MTP Acceleration/braking ramps: 10/10 Timer: 1 min to 99 min, continuous, short-spin Dimensions (WxDxH): 700 x 608 x 345 mm Weight: 99 kg Equipped with: 1x Eppendorf A-4-81 swing-out rotor (max 4000 rpm) 4x Eppendorf bucket 4x Eppendorf bucket aerosol-tight lid 4x Eppendorf MTP carrier 4x Eppendorf insert (10x 15 mL falcon tube capacity) 4x Eppendorf insert (5x 50 mL falcon tube capacity)

IKA Matrix Orbital Delta F2.0 Thermoshaker Speed Range 0 - 1500 rpm Time Setting Max. 6000 min Hea (more)t Output 100 Watts Features - Large and clear display with a convenient menu structure allows for intuitive operation - Speeds of up to 1,500 rpm and shaker diameter of 3 mm ensure the liquid mixes quickly and effectively - Two different speed modes for gentle heating of the samples - Programmable ramps allow for automatic execution of mixing and heating tasks - Smart speed adjustment according to insert, attachment and filling volume - Aluminum die cast housing ensures secure positioning, excellent stability and everyday robustness The IKA Matrix Orbital Δ F2.0 is part of a new and powerful product family of thermoshakers available. IKA Matrix Orbital Δ F2.0 mixes and heats with a fixed insert for 24 x 2.0 ml tubes. Whether its blood samples, pharmaceutical agents, DNA/RNA samples or ELISA assays – samples with even the smallest volumes mix reliably and completely in all laboratory applications. No cross-contamination and an optimal mixing result.In addition, IKA Matrix Orbital Δ F2.0 comes with numerous user-friendly features: Click Here to View Product Video INCLUDED: The IKA Matrix Orbital Delta F2.0 Thermoshaker includes: - MATRIX Orbital Delta F2.0 - IKA Pette vario 100-1000 µl - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Matrix Orbital Delta F2.0 Thermoshaker Specifications Type of movementorbitalShaking stroke3 mmMaximun load0.3 kgPermissible ON time100 %Speed min (adjustable)300 rpmSpeed range0 - 1500 rpmSpeed displayTFTSpeed deviation30 ±rpmSpeed control10 RPM StepsTimeryesTimer displayTFTTime setting min.1 sTime setting max. 6000 min Operating mode timer, continuous and program operationHeating temperature rangeroom temp. +4° - 100 °CHeat output100 WHeat controlTFTSet temperature resolution1 ±°CTemperature control accuracy0.5 ±°CTemperature stability0.5 °CTemperature homogenity0.5 (@ 20°C ... 45°C); 1.5 ±°CHeating rate13 °C/minTemperature displayyesNumber of reaction vessels24x 2.0 mlDimensions (W x H x D)216 x 158 x 351 mmWeight9.2 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21RS 232 interfaceyesUSB interfaceyesVoltage100 - 240 VFrequency50/60 HzPower input240 WPower input max.240 WFuse2x T4A 250VComparison of ModelsSpecificationsMatrix Delta PlusMatrix Orbital Delta F0.5Matrix Orbital Delta F1.5Matrix Orbital Delta F2.0Matrix Orbital Delta FPMatrix OrbitalMatrix Orbital PlusShaking Stroke3 mm3 mm3 mm3 mm3 mm3 mm3 mmMaximum Load0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kg0.3 kgSpeed Range0 - 3000 rpm300 - 2000 rpm300 - 1500 rpm300 - 1500 rpm300 - 2000 rpm300 - 3000 rpm300 - 3000 rpmSpeed Control10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM Steps10 RPM StepsTime Setting Min.1 s1 s1 s1 s1 s1 s1 sTime Setting Max.6000 min6000 min6000 min6000 min6000 min6000 min6000 minHeating Temperature Range-10 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C4 to 100 °C--Heating Rate5.5 °C/min15 °C/min11 °C/min13 °C/min18 °C/min--Dimensions (W x H x D)216x127x351 mm216x149x351 mm216x158x351 mm216x158x351 mm216x147x351 mm200x120x320 mm216x127x351 mmVoltage100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220VFeatures - Collect fractions by time, d (more)rop, or peak to suit all your LC applications - Choose the compact FC 203B for small-capacity collection or the FC 204 for large volumes and capacities - Accept a wide variety of collection vessels, including microplates, microvials, and tubes - In peak mode, collectors monitor a detector signal and identify peaks using either an adaptive-slope algorithm or a specified millivolt threshold - Up to 10 programmable time windows can be added for collecting only what you want, while discarding the column’s void volume, peaks of no interest, and equilibration volumes - Operate as stand-alone instruments with an easy-to-use keypad, or can be controlled through your PC via TRILUTION® LC Software - 3-way diverter valve prevents contamination of collected fractions (standard on the FC 204, optional on the FC 203B) The FC 203B Fraction Collector is an essential tool for low-pressure chromatography and fractionation systems. With its versatile design, it holds one rack and can accommodate various sample configurations, including up to 128 fractions in 12x75mm tubes or up to 105 fractions in 13x100mm tubes. Additionally, it can collect samples in a shallow- or deep-well microplate format. The FC 203B is available with or without a diverter valve, providing flexibility based on experimental needs. For enhanced efficiency, an optional multicolumn adapter is available, allowing collection from up to 8 separate channels simultaneously. INCLUDED: Gilson FC203B Fraction Collector w/ Diverting Valve, 110/220V includes: - Gilson FC203B Fraction Collector w/ Diverting Valve - User's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Dimensions (W x D x H): 260 × 390 × 100 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW