SHHD2325AL orbital shaker Ohaus

Ohaus orbital shakers for extreme environments These OHAUS-designed instruments are used for applica (more)tions that require CO2 and high humidity for optimal cell growth. They are equipped with a remote control, which magnetically attaches to the outside of almost any incubator or rests comfortably on the workbench (as shown in the photo). The base of the stirrer is placed inside the incubator and connected to the controller with a 170 cm cable which allows for easy external control of the speed and time settings. For these characteristics, the motor is equipped with an IP65 degree of protection. Applications Cell cultures, solubility studies, extraction procedures, suspensions and bacterial and yeast cultures, dyes/bleaches, immunoassays, protein studies, absorption techniques Display Independent LED displays to allow the operator to view speed and time settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) and stainless steel, external control module, thin ribbon cable (1.7m) that passes easily under the hatch of the incubator or in the general door Construction features Integrated tray (33x33 cm) with non-slip rubber mat (included)

ELMI Sky Line Digital Orbital Shaker S-3.08L This item was removed from a university where it was su (more)rplus to requirement. It is in good cosmetic condition and in good working order. The power supply is included.

New Brunswick Scientific G-25 Foor Standing Incubator Shaker This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in full working order. It is in reasonable cosmetic condition but has seen some heavy use and has lots of marks and scuffs. Shaker platform - 76 x 46cm

Scientific Industries SI-1500 Orbital Shaker with Ratcheting Clamps The Scientific Industries SI-150 (more)0 Orbital Shaker with Ratcheting Clamps is a heavy duty orbital shaker with flexibility for a variety of vessels on a single platform. The SI-1500 offers whisper quiet operation with fully programmable options. Control speed from 10 RPM to 300 RPM with fully programmable time, reversing time, acceleration and deceleration, orbit reversing, etc. Customizable mixing action allows for anything from a smooth vortex to sloshing aeration. Programmable ramping allows for gentle stirring increase to preserve samples and avoid spills. INCLUDED: The Scientific Industries SI-1500 Orbital Shaker with Ratcheting Clamps includes: - 2 Ratcheting Cushioned Clamps - 1 Non-Ratcheting Cushioned Clamp - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Complete system with OHS 60 Digital, A00000366 Universal H-Stand, A00001307 Stainless steel helix st (more)irring rod, A00001301 Double clamp. OHS are designed to ensure the highest safety standards. The resistant sealed case and the IP 54 degree of protection guarantee durability over time even in the most aggressive environments. Continuous trouble-free operation in your lab, backed by a 3-year extended warranty. Constant torque at any speed The powerful brushless motor and microprocessor control ensure unprecedented performance, highlighting the difference between a conventional shaft stirrer and VELP OHS Series shaft stirrers. Thanks to the SpeedServo feedback system, the torque remains constant at any speed, even at maximum. Always having a constant torque is a very important parameter for the reproducibility of the analyses. SmartChuck Technology: Inserting or Removing an Auction Has Never Been So Simple! How often do you have to remove or replace the stirring rod using two hands and see the rod drop into the liquid? SmartChuck™ technology makes this activity quick and easy with just one hand and no special accessories. Two simple movements allow you to unlock the protective ring and remove or replace the stirring rod. If the protection ring is opened during the analysis, the instrument interrupts the stirring, showing a safety message on the display. Maximum Protection and Security OHS Advances guarantee the highest safety standards. The IP54 degree of protection ensures maximum protection of the instrument from corrosion and high performance in challenging work environments. The stirring is activated through pressure, avoiding involuntary start-ups and the set speed is reached gradually. The large number of sensors and safety controls deactivate the stirring in case of overload, overheating or short circuit. Integrated Timer to Schedule Your Activities The OHS Digitals are equipped with timers that allow you to program the stirrer according to your needs and to carry out the reactions independently. Setting the timer is quick and easy, just press the dedicated button and select a time interval between 1 min and 99:59 hours. The OHS allow you to choose between two different control panels, Digital or Advanced, to better suit the needs of your laboratory. - Digital: precise speed settings; torque indicator; integrated timer. - Advanced: all information at a glance; intuitive; real-time graphs. Very easy to use and comfortable tools. Intuitive control panel equipped with Smartchuck: operations and rod change with one hand, effortlessly. - Mandrel opening: Ø from 1 to 13 mm - Stirring rod diameter for Pass-Through: up to 8.5mm Velp products guarantee you peace and security within your laboratory. - Safety button clearly visible from the front - IP54 protection - Integrated safety sensors CONTROL PANEL OF OHS DIGITAL MODELS A - 7 Segment Display LED B - Torque indicator bar C - Low speed LED (only OHS 200) D - Gear key (only OHS 200) – Timer key for other models E - High speed LED (only OHS 200) – Timer LED for other models F - Speed control knob G - Timer LED (for OHS 200) - Upper lock LED for other models H - Timer key (for OHS 200) – Lock key for all models I - Lower Lock LED J - Main switch K - Smart chuck

KODAK EKTACHEM DTSC II - DT60 II - DTE II Dry Technology Chemistry Analyze. Blood serum chemistry an (more)alyzer for fast test results. Depending on the module, different measurements can be made: DTSC to measure ALB, ALKP, ALT, AST, Ca, CHE, CK, CRSC, Fe, GGT, LDH, Li, LIPA, THEO DT60: to measure AMILO, TBIL, NBIL, BUN/UREA, CHOL, CREA, GLU, HDLC, LAC, Mg, NH3, PHOS, TP, TRIG, URIC. DTE: to measure CO2, Cl-, K+, Na+ DT60 II analyzer dimensions: width x depth x height: 47.6 x 34.9 x 17.2 cm, weight 11.6 kg. DTE II Module Dimensions: (W x D x H) 14.6 x 35.4 x 16.5 cm, weight 3.6 kg; DTSC Module Dimensions: (W x D x H) 34.3 x 35.4 x 18.0 cm, weight: 7.7 kg The KODAK EKTACHEM DTSC II Dry Technology Chemistry Analyzer is high-precision laboratory equipment designed to perform biochemical testing on blood serum samples. With its advanced technology, this analyzer is capable of measuring a wide range of parameters, such as glucose, cholesterol, triglycerides, uric acid, among others. Its compact and easy-to-use design makes it an ideal tool for clinical laboratories and hospitals. In addition, it has an automatic sample loading system, which speeds up the analysis process and minimizes errors. With the KODAK EKTACHEM DTSC II Blood Serum Analyzer, healthcare professionals can obtain accurate and reliable results in a short time, making it easier to diagnose and treat various diseases.

Ohaus VXMTAL Multi-Tube Vortex Mixer Introducing the Ohaus VXMTAL - a state-of-the-art Multi-Tube Vo (more)rtex Mixer equipped with a pulsing mode on digital models to significantly enhance the vortexing action. It boasts a one-piece stainless steel housing design, ensuring easy clean-up and suitability for clean room environments.The Ohaus VXMTAL Mixer features a digital programmable pulse mode, enabling you to adjust the pulse-on/pulse-off times between 1-59 second intervals. This functionality promotes a vigorous mix, providing an optimal solution for precision-based work.For budget-conscious settings where exact speed/time isn't a necessity, our Analog Model offers a cost-effective alternative. It employs a variable speed microprocessor control to ensure consistent and uniform mixing action, with basic speed and time settings adjustable through intuitive 1 to 10 dial settings.The Ohaus VXMTAL Mixer excels in applications that require absolute accuracy and repeatability. Featuring a duty rating for continuous operation, this powerful tool provides efficient high-throughput mixing without the need for constant manual attention.Product Specifications: - Control: Analog - Duty Rating: Continuous - Orbit: 0.1 in (3.6 mm) - Speed Range: 1200 rpm – 2400 rpm - Power: 120V, 5A, 50/60Hz - Item Number: 30392164 The OHAUS Multi-Tube Vortexers come with interchangeable foam racks, ideal for vortexing tubes from 10 to 29 mm in diameter. These vortexers are securely fitted with strong suction cup feet to minimize motion and prevent sliding on your work surface.The digital models are furnished with independent LED displays for speed and time, allowing you to view both settings simultaneously. Our non-digital variable speed models serve as an economical alternative when exact speed control isn't a priority.Applications of the Ohaus VXMTAL Vortex Mixer include suspensions, genotyping, and high throughput DNA and RNA testing in clinical labs. The product comes with a stainless steel foam rack for (50) 12 mm diameter tubes, and interchangeable foam racks for vortexing tubes ranging from 10 - 29 mm in diameter. Operation is straightforward with a detachable 3-wire cord and plug included in the package.Experience the Ohaus quality and elevate your lab efficiency with the Ohaus VXMTAL Multi-Tube Vortex Mixer.INCLUDED: The Ohaus VXMTAL Multi-Tube Vortex Mixer includes: - Power Cord - Two Year Manufacturer's Warranty

KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump KNF SIMDOS diaphragm pumps offer a variety of options to suit (more) most laboratory liquid metering and dosing needs. The UFEM 1.10 FT.18S2 version has a liquid transfer flow rate of 1 – 100 mL/min and discreet dosing volumes of 1 – 999 mL. It is constructed with the following chemically-resistant fluoropolymer flow path materials: PTFE head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 10 pumps are self-priming up to 9.8 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 UFEM 1.10 FT.18S2 Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty