Orbital shaker SHHD4525DG Ohaus

Benchmark Orbi-Shaker CO2 XL Orbital Shaker The Orbi-Shaker CO2 XL is designed for shaking, mixing a (more)nd aeration applications in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 60C and humidity levels up to 100%. To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller allows the user to set and adjust the shaker settings without opening the chamber door(s). The instrument is supplied with a 16" x 16.5” non-slip platform. In addition, convenient MAGic Clamp platforms (available in large or small) are also available for use with Erlenmeyer flasks and test tube racks. The unique magnetic attachment method has been widely recognized as the easiest way to instantly change between flask clamps of different sizes. Click Here to View Product Video INCLUDED: The Benchmark Orbi-Shaker CO2 XL Orbital Shaker includes: - 16 x 16.5 in Platform w/ Flat Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISTHBLHTS Heated Thermal Shaker The Ohaus ISTHBLHTS Thermal Shakers is designed for applicati (more)ons that require consistent and precise results. With heating and shaking capabilities. These shakers use interchangeable blocks to accommodate a wide variety of tubes and microplates. The easy-to-use, 4.3", color, LCD touch screen allows the user to save and visibly track progress through the live status bar for five user defined programs, each with five individual steps. The unit's enhanced electronics and dual temperature sensors provide accurate, dependable temperature settings across the operating range with a temperature accuracy of ± 0.5° C between 20° C and 45° C; ± 2° C below 20° C and above 45° C. The ISTHBLHTS is designed for applications that require consistent and precise high-speed shaking with temperature control to 100° C. With heating and shaking capabilities, our shakers use interchangeable blocks to accommodate tubes and microplates. Intuitive LCD touchscreen allows the user to save and track progress of 5 user-defined programs, each with 5 individual steps. Enhanced electronics provide dependable temp. settings across the operating range. Program control capabilities allow user programmable operation for automated use and memory. Storage for five separate, 5-step programs, or unlimited if using the USB. Enhanced electronics provide accurate and dependable temperature settings across the operating range. The USB port allows for easily transferring test data to a flash drive for data logging and storage. Also ideal for program storage and performing software updates.Click Here to View Product Video INCLUDED: The Ohaus ISTHBLHTS Heated Thermal Shaker includes: - 1.5mL Block - Clear Rack - Cover - Hex Head Screwdriver - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISTHBLHTS Heated Thermal Shaker Specifications Temperature Range4° C above ambient to 100° CTemperature Accuracy± 1° C between 20° C and 45° C± 2° C above 45° CSpeed Range300 to 3000 rpmSpeed Accuracy± 2%Timer1 minute to 99 hours, 59 minutesOrbit3 mm (0.12")Cooling Rateabove ambient 2-3° C/min; below ambient 0.5-1.0° C/minHeating Rate5° C/minOverall Dimensions (L x W x H)10.25 x 9.75 x 5.2" (26 x 24.8 x 13.2 cm)Ship Weight11.9 lbs (5.4 kg)Request a Formal Quote

Ohaus oscillating and undulating agitators OHAUS rocking and undulating shakers are designed for use (more) in a wide variety of laboratory applications. The rocking shakers feature a controlled rocking motion, while the wave shakers provide a mild three-dimensional wave motion with low foaming effect. Available in digital version and in the economical analog version. All models include a non-slip mat. As an accessory, a stacking tray is available to easily double the flow rate. - Easy adjustment of the angle of inclination and speed, for optimal mixing - Results reproducible with digital models. Precise adjustment of the angle of inclination in 1 degree increments with a decrease in speed up to 1 rev / min. and intuitive touch controls - The speed boost function allows you to gradually increase the speed to the desired setpoint to avoid splashing. A state-of-the-art motor and electronics allow you to maintain a regular oscillatory or undulatory movement. Applications Chemical extractions, mixing of blood samples, coloring gels, cell cultures, solubility studies Operation Detachable three-wire cable and plug (included) Structure Cold Rolled Steel (CRS) Construction features Integrated tray with non-slip rubber mat (included)

Vortex stirrers with Ohaus microplate The high speed and small orbit make these mixers perfect for m (more)ixing microplates effectively. All models are designed for continuous laboratory operation. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: Touch / Standby / On switch; LED display for speed and time, buttons for adjusting default values. Single or double holders for microplates are available as accessories. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Microplate support (Single) (code 30400215) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Communication N / A Structure Cycoloy Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Orbital Shaker (2D or 3D) Major Science MS MW-23 New equipment in its original packaging Reference:  (more)MW-23 Waver Shaker Speed ​​/ Inc: 5 to 100 rpm / 1 rpm Timer: 9999mins with alarm, continuous / 1min Load capacity: 15kg Motor: Brushless motor, DC type Orbital motion and nutation (2D or 3D) Platform dimension (width x length): 33 x 33cm Platform Material: Painted Iron Metal Unit dimension (Width x Length x Height): 13.19"14.6"x9.1" (335x370x230mm) Weight approx. 10kg

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Hanning Elektro-Werke Trivac Vacuum Pump Typ D4B was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been tested with a gauge (not included). It appears to be working well. The power cable is not included. It is in good cosmetic condition with some marks from use. It comes with 1 x Varian Oil Mist Eliminator

VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head Upper Measuring Limit 100 mbar/hPa (750 Torr) L (more)ower Measuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Interface RS232C Features - Vacuum measuring device for connecting external vacuum sensors for measurements directly on the system - Flexible and expandable with up to eight sensors, four of the types VSK 3000 / VACUU·VIEW (Atm. to 0.1 mbar) and VSP 3000 / VACUU·VIEW extended (Atm. up to 10-3 mbar) - Relative pressure measurement with reference sensors (VSK 3000) and data logger function with up to 32000 measuring points (RS 232C) - Robust plastic / ceramic vacuum sensor VSP 3000 with high chemical resistance - VSP 3000 with a wide measuring range from atmospheric pressure to fine vacuum (10-3 mbar) thanks to the thermal conductivity measuring principle The fully electronic vacuum measuring device DCP 3000 is both versatile and decisive with its mechanical robustness, measuring accuracy and reliability. The large, illuminated display provides the measured value display of all connected sensors via an easy-to-use rotary control. Up to eight vacuum sensors (four of each type VSK 3000 / VACUU·VIEW and VSP 3000 / VACUU·VIEW extended) can be connected to the DCP 3000. The measurement can be carried out directly on the application. The DCP 3000 enables a relative pressure measurement (reference sensor VSK 3000) as well as working with pressure-dependent switching points by specifying switch-on and switch-off points on an external valve. The vacuum measuring device can also be used as a data logger with up to 32,000 measuring points. The data is read out via the serial interface (RS 232C). The vacuum sensor VSP 3000 is based on the gas thermal conductivity (Pirani) principle for the wide measuring range from atmospheric pressure to 10-3 mbar. Thanks to its structure made of chemically resistant plastics (PBT, PUR) and ceramics, it offers significantly higher chemical resistance and robustness compared to conventional Pirani sensors with fine wire metal filaments. Please also note our alternative product VACUU·VIEW extended.INCLUDED: The VACUUBRAND DCP 3000 Vacuum Gauge with VSP 3000 Head includes: - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MARSHALL Select MS-P200UL Pipette, 20-200ul Volume Range 20 to 200ul Adjustable or Fixed Volume Adj (more)ustable Pipette Type Manual Air Displacement Features - Ergonomic design minimizes user fatigue and risk of repetitive strain injuries - Lightweight and low-force operation enhances comfort during extended use - Large display window for clear volume identification - Integral tip ejector facilitates access into narrow tubes, improving usability - Compatible with universal pipette tips, increasing versatility - Easy to calibrate and maintain, ensuring long-term reliability - The lower part of the pipette is autoclavable for easy sterilization - Manufactured from innovative materials for durability and performance - Quality tested according to ISO8655-2:2002 standards for assurance of accuracy - Ideal for use in various laboratory applications requiring precise volume measurements The MARSHALL Select MS-P200UL Pipette is a precision instrument designed for meticulous laboratory work, offering adjustable volume settings from 20 to 200ul with fine increments of 1ul. This manual air displacement pipette features an innovative thumb plunger mechanism for smooth volume adjustment, ensuring precise control during experiments. Engineered with ergonomics in mind, this pipette boasts a lightweight, low-force design that significantly reduces the risk of repetitive strain injuries, making it ideal for prolonged use in demanding laboratory environments. The large display window prominently shows the volume setting for easy identification immediately, enhancing usability and accuracy. Additional features include an integral tip ejector that facilitates access into narrow tubes, increasing its versatility across various applications. The pipette is compatible with universal pipette tips, broadening its applicability. For maintenance, the lower part of the pipette is autoclavable, allowing for straightforward sterilization without compromising the integrity of the device. Manufactured from innovative materials and quality tested according to ISO8655-2:2002 standards, the MARSHALL Select MS-P200UL Pipette is not only durable but also ensures consistent performance and reliability, making it an essential tool for any laboratory focused on precision and ergonomics. INCLUDED: The MARSHALL Select MS-P200UL Pipette, 20-200ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Memmert BE 500 is ideally suited for all applications with temperatures up to 70°C in research,  (more)medicine, pharmacy and food analysis, as well as food chemistry. It is especially useful for incubating live cultures at 37°C. The incubator is equipped with manually regulated air flow. Temperature range: Ambient temperature +5°C to 70°C Capacity: 107 L Internal glass door for observation Convection: natural Dimensions (WxDxH): 710 x 575 x 760 mm Internal dimensions (WxDxH): 555 x 400 x 480 mm

The ramps are used to easily place the trolleys containing loads onto the 4-load-cell platform scale (more)s. They enable placing the scale into the production line as a measuring or control workstation. Uncomplicated loading and unloading of the weighing platform allows smooth control over the loads and is time saving.