Ohaus Endeavor 5000 Series e-E51LDMP03 AM Light Duty Microplate Shaker

Orbital shaker Selecta Rotaterm with heating platform. Temperature range on room plate +5 ° C to 330 (more) ° C. Temperature stability ± 1 ° c. Speed from 20 to 230 oscillations per minute. Oscillation adjustable to 15 or 20 mm. Overtemperature alarm.

Ohaus SHRC0719DG Reciprocating ShakerThe OhausSHRC0719DG Digital Reciprocating Shaker is designed fo (more)r a range of applicationsincluding cell cultures and extraction procedures that require accurate,repeatable results. The shaker is microprocessor-controlled to provideconsistent, uniform shaking action. The back-and-forth reciprocating motion hasa 19 mm stroke length. Permanently lubricated ball bearings andmaintenance-free, brushless DC motor provide reliable service and continuousduty operation.Touchpadcontrols with independent LED's for speed/time allow operator to view allsettings at once. Timer displays elapsed time or when programmed to a set time,will turn off when time reaches zero.Speed rampingfeature slowly increases the speed to desired set-point to avoid splashing. Theload sensor detects unbalanced conditions & automatically reduces rpm to asafe speed to protect samples.The SHRC0719DG shakeris equipped with an overload protection system. Audible and visual signals willactivate when the system detects an obstruction or overload of the tray to warnthe operator INCLUDED: The Ohaus SHRC0719DG Reciprocating Shaker includes: - Non-Skid Rubber Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus ISICMBCDG Incubating/Cooling Shaker The Ohaus Incubating/Cooling Orbital Shaker is microplate  (more)ready without the need for any additional accessories. Optional modular blocks can accommodate micro-tubes, centrifuge tubes, vials, or culture tubes. Unit holds microplates or modular blocks with a 5" (12.7 cm) tall interior capacity. Ideal for analyses that require a stable, controlled temperature. The Ohaus ISICMBCDG Incubating Cooling Orbital Shakers are designed to incubate samples from 10° below ambient to 65° C. The ISICMBCDG is designed to hold two microplates or two optional modular tube blocks in a variety of configurations. All models feature touchpad controls with easy-to-read, independent LED displays for temperature, speed and time. Microprocessor control provides consistent uniform shaking action. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted.Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation.Units slowly increase speed to desired setpoint to avoid splashing. Both models feature overload protection. Audible and visual signals activate when the system detects an obstruction or tray overload. INCLUDED: The Ohaus ISICMBCDG Incubating/Cooling Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISICMBCDG Incubating/Cooling Shaker Specifications Temperature RangeAmbient -10°C to 65°CTemperature Uniformity± 0.5° C at 37° CSpeed Range100 to 1200 rpmSpeed Accuracy± 2% of set speedTimer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity8 lbs (3.6 kg)Tray MaterialAluminumTray Dimensions (L x W)11 x 7.75" (27.9 x 19.7 cm)Interior Dimensions (L x W x H)11.3 x 8.3 x 5.7" (28.7 x 21.1 x 14.5 cm)Overall Dimensions (L x W x H)17 x 11 x 10.7" (43.2 x 27.9 x 27 cm)Ship Weight30 lbs (13.6 kg)

Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate PlatformThe new  (more)Orbi-Shaker CO2-MP is designed for thorough, mixing of microplates in extreme environments, including CO2 incubators. It can withstand temperatures from 0 to 65°C and humidity levels up to 100%.To avoid contamination, unintentional release of gas or deviations from protocol, both speed and time are set via the included remote control module. The remote controller can magnetically mount to the outer walls of the incubator and allows the user to set and adjust the shaker settings without opening the chamber door(s). A 6 position microplate platform is included and secures both standard or deep well plates. Click Here to View Product Video INCLUDED: The Benchmark BT4500 Orbi-Shaker CO2 with Remote Controller & 6-Position Microplate Platform includes: - Rubber Mat Microplate Platform 13 x 12 in - Power Cord - Operator's Guide - Manufacturer Documentation - 2 Year Manufacturer's Warranty

Benchmark Orbi-Shaker MP Microplate Orbital Shaker The Orbi-Shaker MP is designed with a 3mm mixing  (more)orbit, optimized for thorough mixing of microplates and/or PCR plates. Up to four plates (standard or deep well) can be placed on the included platform and are instantly secured without the use of springs, clamps or tools. Click Here to View Product Video INCLUDED: The Benchmark Orbi-Shaker MP Microplate Orbital Shaker includes: - 4 Position Micro plate Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V Working Temperature Range At least  (more)10°C above ambient to +250°C Setting Resolution (Temperature) Up to 99.9°C: 0.1°C / From 100°C: 0.5°C Chamber Volume 256L (9.04 Cu. Ft.) Features - Working temperature range from at least 10°C above ambient to +250°C - Volume capacity of 256L (9.04 Cu. Ft.) with stainless steel interior - TwinDISPLAY with adaptive multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Forced air circulation adjustable in 10% steps, with pre-heated fresh air admixture - AutoSAFETY system with integrated over- and undertemperature protection - Supports up to 9 shelves with a maximum chamber load of 661 lbs - Three freely selectable temperature calibration points - Function SetpointWAIT ensures process begins only once set temperature is reached The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V is designed to provide exceptional precision and reliability for temperature-sensitive processes. With a working temperature range of 10°C above ambient to +250°C and a spacious 256-liter stainless steel interior, this oven is perfect for demanding laboratory and industrial applications. The TwinDISPLAY system, featuring two high-definition TFT-color displays, allows for precise control, while the adaptive multifunctional PID-microprocessor controller ensures accurate and uniform temperature management. Forced air circulation can be adjusted in 10% increments, with a pre-heated fresh air admixture, enhancing efficiency and temperature stability. This pass-through oven offers advanced safety features, including the AutoSAFETY system with integrated over- and undertemperature protection, along with visual and acoustic alarms. With support for up to nine shelves and a maximum chamber load of 661 lbs, the UF260TS can accommodate large samples or multiple smaller items with ease. Additional features such as the SetpointWAIT function, which ensures the process begins only after the set temperature is reached, and the HeatBALANCE function, which optimizes heating performance, make this oven a valuable asset for any lab or production environment. INCLUDED: The Memmert UF260TS Forced Circulation Pass-Through Oven 256L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Base Cladding with Screw Connection - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes: 12 mass standards, 2 pairs of tweezers, 2 brushes and 1 pair of gloves. Applications: Calibration and verification of scales: Class E1 standards are ideal for calibrating and verifying precision analytical and laboratory scales. Metrological laboratories: The standards are indispensable in metrological laboratories where the highest measurement precision is required. Research andiIndustrial institutions: They are used in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

The Leica Biocut 2030, previously called the Reichert Jung Biocut 2030 is a unique high performance  (more)microtome that can be used in nearly all fields of histological techniques in biology and industry. Equipped with a microtome feed system developed with the latest technology, the Biocut 2030 is a combination of proven and novel specimen holders with an ergonomic design. The Biocut 2030 Microtome has an absolutely backlash-free, vertical guideway for the specimen cylinder. This Leica microtome is built with exceptionally durable base plate and housing. A truly flexible microtome, the Biocut 2030 also uses a new style universal knife holder system. Featuring high precision and stability, the Leica Biocut 2030 ensures exact and reproducible section quality in wax and plastic embedded sections. This microtome also prioritizes operator comfort through the ergonomic position of the hand wheel. Along with perfect specimen clamping, the system can quickly change specimen holders. Other features of the Leica Biocut 2030 microtome include: coarse feed sideways and forward as required, perfect specimen clamping, easy servicing, and vertical slideway and micrometer feed mechanism.