IKA Vibrax VXR laboratory shaker with VX8 2-bar tray

This New Brunswick Scientific Innova 4330 Refrigerated Shaking Incubator was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and the incubator and shaker have both been tested (digital thermometer not included). It is in full working order. It is in reasonably good cosmetic condition, with signs of use. Internal Dimensions: 87 x 56 x 34 cm

Ohaus ISWV02HDG Waving Incubating Shaker The Ohaus ISWV02HDG Incubating Waving Shaker combines the u (more)nique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit. The ISWV02HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Waving shakers offer a smooth, low-foaming three-dimensional "wave" motion. The ISWV02HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISWV02HDG Waving Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISWV02HDG Waving Incubating Shaker SpecificationsTemperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 30 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 20°Timer1 second to 160 hoursMaximum Weight Capacity5 lbs (2.3 kg)Tray MaterialAluminumTray Dimensions (L x W)9.25 x 7.25" (23.5 x 18.4 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.4" (27.3 x 19.7 x 8.6 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(7) { background-color: #fffacd; }

Ohaus Endeavor 5000 Series e-E51LD0420 AM Light Duty Orbital Shaker Speed Range 50 to 300 RPM Maximu (more)m Capacity 8.8 lb. (4 kg) Orbit 20 mm Features - Compatible for use in incubators and cold rooms, enhancing versatility across experimental conditions - Features a triple eccentric drive and maintenance-free brushless DC motor for stable, long-term shaking - Bright, backlit LCD display with easy-to-navigate menu for speed, time settings, and advanced features - Integrated safety mechanisms with overload and unbalanced detection to protect samples - Equipped with RS232 interface for two-way communication, enabling data logging and unit control - Durable construction with chemical-resistant polymer housing and sturdy aluminum tray - Small footprint design with visual and audio alarms, and advanced microprocessor control for gradual speed increase to avoid splashing Click Here to View Product Video The Ohaus Endeavor 5000 Series Light Duty Orbital Shakers are a trusted choice for everyday laboratory shaking needs, designed to accommodate a wide range of applications from microbiology and molecular biology to food science and chemistry. These shakers come in three models, featuring either a 3 mm orbit, a 20 mm orbit, or a specialized microplate configuration, ensuring versatility for various research requirements. Each model is compatible with use in incubators and cold rooms, highlighting their adaptability to different experimental conditions. The shakers boast a durable, chemical-resistant polymer housing and a sturdy aluminum tray with multiple attachment points for accessories, making them both robust and easy to clean. A key feature of the Endeavor series is its triple eccentric drive and maintenance-free brushless DC motor, providing stable and accurate shaking over long periods. Safety is enhanced with integrated overload and unbalanced detection systems to protect valuable samples. The series is equipped with a bright, backlit LCD display that shows speed and time settings, including a timer with both count-up and count-down functions that automatically shuts off shaking when time expires. An easy-to-navigate menu and simple knob control facilitate operation, while the inclusion of a tray with a non-slip rubber mat, flask clamps, and tube racks enhances its utility. An RS232 interface allows for two-way communication for comprehensive data logging and control, ensuring these shakers meet the demands of modern laboratories. Additionally, design features such as visual and audio alarms, a small footprint to conserve bench space, and advanced microprocessor control for gradual speed ramping further underscore the thoughtful engineering behind the Ohaus Endeavor 5000 Series. Optional accessories like a universal platform and over 20 flask clamps and tube racks are available, making these shakers a versatile and essential tool for a variety of scientific studies. INCLUDED: The Ohaus Endeavor 5000 Series e-E51LD0420 AM Light Duty Orbital Shaker includes: - 11.75 x 8.75 in. Non-Skid Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Rocker 2D Basic Shaker Speed Range 5 to 80 RPM Type of Movement Rocking Rocking Angle 8° Featur (more)es - Different attachments enable use for a variety ofapplications - Usable at 4 to 50 °C in incubators - Anti-slip rubber mat included - Easy operation with touch keypad - Suitable for continuous operation - Shaking diameter: 8° (angle) - Speed range: 5 - 80 rpm Rocking shaker with adjustable speed for smooth mixing tasks. Used for homogeneous mixing in flasks, culture flasks, Petri dishes, and tubes. Even with load and voltage fluctuations, shaking speed remains constant. A fixed tilt angle ensures reproducible test results. Different attachments enable use for a variety of applications, and it is usable at 4 to 50 °C in incubators. The shaker includes an anti-slip rubber mat and easy operation with a touch keypad. Suitable for continuous operation, it offers a speed range of 5 - 80 rpm with precise control in 1 RPM steps.

This Hitachi S3000H SEM Scanning Electron Microscope is being sold on behalf of a laboratory. It is  (more)surplus to requirements. The lab informed us that it was working when last used. The microscope is from 1998, has one SE2 Detector. Included are the following; Hitachi S3000H SEM Scanning Electron Microscope LabModel: S-3000HDate: 9/8/12Part#: 50E-G386Serial#: 1014-30 System specifications- 0.3 - 30kV acceleration voltage range- 5 nm resolution at 25kV in variable pressure mode- 150mm diameter maximum specimen size- Dual-bias for low voltage signal noise- Backscatter mode Canatron Transformers EN 60742 Transformer Model: EN 60742Serial#: CT6699 Hitachi CM751ET MonitorModel: CM751ETSerial#: G8E008620 Hitachi CM751ET MonitorModel: CM751ETSerial#: T9A 012253 Hitachi S3000H SEM Control PanelSerial#: 1014-30 Edwards Oil Mist Filter EMF20Serial#: A 462 29 000 Hitachi Measure Function Setup Disk V 01-05Serial#: 50E-5497 Hitachi SEM Data Manager Setup Disk V 01-05Serial#: 50E-5502 Hitachi S-3000Series V 10-16 CD Disc 1 & 2Serial#: 50E-8108 Hitachi PC-SEM Restore CD Disc 1 & 2Serial#: 1014-30 Adaptec SCSI Select v2.57.4 Floppy DiskSerial#: 1492920-00 Adaptec AVA-2915LP/2930LP v1.13 Floppy DiskSerial#: 1495022-00JA HP Operating System DVDSerial#: 483886-B21 Contec Drivers Software COM Setup Disk v.1.8Serial# LYBM994 HP Compaq Business PC Documentation and Diagnostics DVDSerial#: 490849-B21 HP Operating System DVDSerial#: 394378-002 HP Operating System DVDSerial# 486467-B22 HP Restore Plus! DVD Serial#: 481206-B25 Roxio Creator Business 10 DVD Serial#: 498164-B21 S300H Printed Circuit Board Model S-3000H SEM Instruction Manual Serial#: 50E-9247-9 Hitachi S-Type FilamentsDate: 08.06.201Lot#: 0490228080Serial#: 777-0179

SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Se (more)nsor & Sensor StandThe SCI550-Pro is one of the most technically advanced hotplate-stirrers in the marketplace. With independent back-lit LCD displays for both heat and stirring functions and PID technology. The SCI550-Pro controls temperature at +/- 1ºC. It also incorporates a DC brushless (spark free) motor for extremely long life and excellent performance. It is widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals etc. Combining with glass ceramic work plate, brushless DC motor and external temperature sensor, the work plate temperature is optimized up to 550°C.Product Features - Easy-to-read independent back-lit LCD displays for heat and stirring. - Digital speed controlling, max. speed at 1500rpm - Built-in PID controller ensures safe heating of the medium with overheating protection. - Heat only, stir only or heat and stir together functions. - Max. heating plate temperature 550°C - Glass ceramic work plate provides excellent chemical resistant performance and most efficient heat transfer. - RS232 for remote control, providing PC control and data transmission. - Low temperature stability - External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C. - Accessory PT-1000 stand available (built in stand mount) - Electronic speed control for constant speed even during changes in load - Maintenance free DC brushless motor for long life and more stirring power - Two rotating knobs enable easy adjustment of speed and temperature. - High magnetic adhesion - “HOT” warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off. Click Here to View Product Video INCLUDED: The SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Jenesco Pro-16S Ozone GeneratorThe Pro-16S ozone generator is intended for use incommercial applicat (more)ions, or wherever a high output of ozone is necessary toreduce bacteria, odors, mildew, & mold. It is very powerful, with ozoneoutput potential of up to 16,000 mgph, using the ozone adjustment knob. Ozonegasses are able to penetrate the infected area, attaching itself to themolecules, chemically changing the structure and destroying odors at thesource. The Pro-16 S ozone generator can cover up to 14,000 sq ft for odors,and 4000 sq ft for mold. It features timed sequences ranging from 15 minutes to12 hours, but also offers continuous operation simply by using the ‘hold’position on the timer knob. The hour meter registers usage up to 99,999 hours. This 10 lb 20” x 18” x 5” high generator agreat choice for a wide variety of applications. Made in the USA.INCLUDED: The Jenesco Pro-16S Ozone Generator includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

via this link you can view our current stock and prices !

Operating temperature range: 0°C to 40°C Temperature stability: ±0.5°C Temperature setting resolutio (more)n: 0.1°C Temperature display resolution: 0.1°C Permissible ambient temperature: 5°C to 40°C Maximum return temperature: 80°C Cooling capacity (medium: Water glycol): 20°C: 1 kW 10°C: 0.7 kW 5°C: 0.55 kW 0°C: 0.35 kW Filling volume: 295 g Coolant: R134a Pump capacity flow rate: 23 l/min Pump capacity discharge pressure: 1 bar Dimensions (WxDxH): 375 x 490 x 640 mm Filling volume: 7 to 9.5 l Weight: 45 kg