Heidolph Reax 20/8 Overhead Shaker

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours

This Thermo Scientific MaxQ 5000 Incubator Shaker Model - 4358 - SHKA5000-8CE was removed from  (more)a university lab where it was surplus to requirements. The unit powers up and is in full working order. It was tested with a digital thermometer (not included). It is in good cosmetic condition with minor marks.

IKA Roller 10 Digital Shaker Type of Movement Rolling Speed Range 5 to 80 RPM Number of Rolls 10 Rol (more)ls Features - Timer: Countdown, adjustable from 1 s to 99h 59min - Counter: Display of shaking time - Error Code Display - Usable at 4 to 50 °C in incubators - Suitable for continuous operation - Removable rolls enable shaking of larger tubes - Easy operation with keypad - Shaking diameter: 24,5 mm (height) - Speed range: 5 - 80 rpm The digital roller shaker with 10 rolls provides smooth rocking and rolling action at infinitely adjustable speeds. Used for mixing blood samples, solid and liquid suspensions, and viscous samples, the unit can be used with all conventional tubes and cylindrical bottles. Easily removable attachments provide for quick cleaning in case of sample spills. The shaker features a countdown timer adjustable from 1 second to 99 hours and 59 minutes, and a counter display for shaking time. It operates effectively at 4 to 50 °C in incubators and is suitable for continuous operation. Removable rolls enable the shaking of larger tubes, and easy operation is ensured with a keypad. The speed range is 5 - 80 rpm with a 7-segment LED display, adjustable in 1 RPM steps. The shaker has a rolling motion with a shaking diameter of 24.5 mm, dimensions of 380 x 115 x 545 mm, and weighs 6 kg.

IKA Loopster Digital Shaker Type of Movement Rotating Speed Range 5 to 80 RPM Tilt Angle Max. 90° F (more)eatures - Freely adjustable rotary angle - Timer: Countdown, adjustable from 1 s to 99h 59min - Counter: Display of shaking time - Different attachments allow a variety of applications - Usable at 4 to 50 °C in incubators - Error code display - Easy operation by foil keypad - Suitable for continuous operation - Speed range: 5 - 80 rpm Digital rotator for smooth but effective mixing with adjustable speed. Ideal for biological samples, particularly blood samples. Suitable for separating and mixing processes of powdered and liquid samples in Eppendorf tubes and Greiner tubes up to 50 ml. The easy removable attachments allow simple and quick cleaning of the unit of spilled samples. The rotator features a freely adjustable rotary angle and a countdown timer adjustable from 1 second to 99 hours and 59 minutes, with a display for shaking time. Different attachments allow a variety of applications, and the unit is usable at 4 to 50 °C in incubators. It also includes an error code display, easy operation via foil keypad, and supports continuous operation. The speed range is 5 - 80 rpm, adjustable in 1 RPM steps with a 7-segment LED display.

Benchmark BioMixer 3D Nutating Shaker The Benchmark BioMixer 3D multi-functional shakers provide a 3 (more)-dimensional “nutating” motion for thorough, foam-free mixing in blood and centrifuge tubes, as well as in a variety of flat vessels. The BioMixer comes standard with an autoclavable dimpled mat while optional flat mats are also available for mixing other vessel types. Stacking platforms can be purchased as accessories, effectively doubling the usable surface area of each model. Even the smallest single platform configuration has 24% more platform work surface than traditional nutating mixers. These mixers feature maintenance free, brushless motors capable of loads up to 2kg and are safe for use in cold rooms and incubators. INCLUDED: The Benchmark BioMixer 3D Nutating Shaker includes: - 12 x 12 inch Dimpled Mat - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Max speed: 28000 rpm Max RCF: 51710 xg Acceleration: 9 stepped, reproducible profiles Braking: 9 ste (more)pped, reproducible profiles and unbraked deceleration Temperature control: 0°C to 40°C Dimensions (HxWxD): 358 x 540 x 600 mm Weight: 100 kg Equipped with: Heraeus 3740 fixed angle rotor Max speed 28000 rpm Capacity 12x 1.5 mL

MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar Ultimate Vacuum 253 mbar (more) (190 Torr) Pumping Speed 12 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a pumping speed of 12 L/Min for effective operation - Achieves a vacuum level of 253 mbar (190 Torr) for efficient performance The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump is designed for efficient and reliable operation in environments that require clean and uncontaminated air exhaust. This pump features an oil-free design with a built-in filter, ensuring that the exhausted air remains free from contamination. The MS-VP250 is equipped with an automatic cooling exhaust system, allowing for continuous 24-hour operation, making it ideal for demanding laboratory and industrial settings. Its pressure-adjustable design enables precise control of vacuum and gas velocity to meet specific application requirements. The pump's TEFLON surface treatment provides robust chemical and corrosion resistance, ensuring durability even when exposed to harsh gases. With an ultimate vacuum of 253 mbar (190 Torr) and a pumping speed of 12 L/Min, the MS-VP250 delivers efficient vacuum performance. It features 6 mm inlet and outlet flanges, operating within a temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, making it suitable for environments where low noise is essential. Its compact design, measuring 7.7 x 3.8 x 6.1 inches, and a weight of 7.6 kg, make it easy to fit into various setups. The pump is equipped with nitrile butadiene rubber valves for reliable operation and requires a motor power of 75W, compatible with electrical requirements of 110/220V, 50/60Hz. The MS-VP250's distinctive orange color not only enhances its aesthetic appeal but also signifies its robust anticorrosive and chemical resistance properties, making it a reliable choice for a wide range of vacuum applications.INCLUDED: The MARSHALL Select MS-VP250 Chemical Protected Diaphragm Vacuum Pump, 250 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Scientific Industries Vortex-Genie PulseTrue pulsing action is ideal for applications requiring more (more) aggressive action than standard vortexing. Variable RUN/STOP time for quick pulsing or interval mixing. Fully programmable "ON" and "REST" function. The Vortex-Genie Pulse is new in the box . Includes: Power Cord Original Manufacturer Documentation Full 6 month Parts and Labor WarrantyScientific Industries Vortex-Genie Pulse Specifications Speed (RPM) 500-3000 (2850 for 50Hz models) Timer 1-99 minutes or continuous Pulse - ON/OFF 0.1 seconds - 99 minutes Product Weight 4 Kg (8.8 lb) Dimensions (base) 165 x 122 x 165mm (6.5 x 4.8 x 6.5in) Markings ETL listed / CE