GFL 3015 Platform Shaker

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours

Ohaus heavy duty vortex agitators Robust construction and a top quality German-made motor for contin (more)uous operation with accessories across the entire speed range. Analog models: economical alternative for simple mixing; controls: knob adjustment. Digital models: timer and exact speed control for applications requiring repeatable results; controls: switch A wide range of accessories is available for microtubes, microplates and tubes with sizes from 0.5 to 50ml. - Safety with high-speed mixing: the exclusive accessory locking system allows the mixer to operate safely over the entire speed range. - High quality motor that allows continuous operation and load capacities up to 1.1 kg. - Effective speed control, from low rpm for gentle shaking to vigorous, high-speed, vortex mixing for difficult samples. The product includes: Small cup (code 30400210) Universal support (code 30400226) Cover for universal support (code 30400225) Foam insert (for 1.5-2.0 ml tubes) (code 30400217) Applications ELISA tests, PCR preparations, digestions, cell destruction Display Independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models), and marked knobs for variable speed control (analog models) Operation Detachable three-wire cable and plug (included) Structure Cycoloy, Touch / Standby / On rocker switch (both models) Construction features Universal holder with foam insert for (38) 1.5 to 2 mL tubes. Universal lid and cup head (included) Not sure which agitator to choose? Download the Vortex Shaker Selection Guide to get a quick overview of all available models.

Yamato MK-161-115V Compact Rotary, Elliptical, & Reciprocating Shaker, 115V Memory Capacity 4GB (more) Sampling Interval 1 MS to 1 Hour Time scale of waveform display 1 sec. to 24 hour /division Features - Compact, space saving design - Changeable rotary, elliptical and reciprocate motion for mixing, extracting and stirring of samples - Stable and high torque shaking power and speed with the DC brushless motor - Shaking frequency and timer are dial setting and digital display - Shake pause function, timer function and constant operation by one switch - Selectable mixing, extracting and stirring patterns when used with different shaking stage and racks (optional item) - Can be placed inside IN604W incubator for shaking incubation Compact and space-saving laboratory shaker in changeable rotary, elliptical and reciprocate motion for mixing, extracting and stirring of samples. Stable and high torque shaking power and speed with the DC brushless motor. Shaking frequency and timer are dial setting and digital display. Shake pause function, timer function and constant operation by one switch. Selectable mixing, extracting and stirring patterns when used with different shaking stage and racks (optional item). Can be placed inside IN604W incubator for shaking incubation. Shaking frequency 20~200 rpm. Shaking range 30mm. INCLUDED: The Yamato MK-161-115V Compact Rotary, Elliptical, & Reciprocating Shaker, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Shaker for flask rotation Heidolph Reax 20. Capacity for two bottles with a maximum diameter of 136  (more)mm and 160 to 270 mm in height. Adjustable speed from 1 to 16 rpm. Ignition switch with signal light. Quick and easy fixing of jars. Dimensions 470*490*520mm; 25 kg. User manual. The Heidolph Reax 20 rotary jar shaker is equipped with an adjustable speed motor that provides a stable continuous rotation movement. The fixing system, with a tension spring, allows you to securely hold and accommodate wide-neck glasses and jars up to a diameter of 136 mm and between 160 and 270 mm in height. Designed to work with wastewater and sludge.

Benchmark Incu-Shaker Mini CO2 Shaking Incubator Ideal for the culturing of non-adherent cells, the  (more)Incu-Shaker CO2 Mini combines a precision CO2 incubation chamber with an integral orbital shaker, providing the optimum conditions for suspension cell culture. With Benchmark's unique and proprietary heat distribution technology, the incubator provides the highest levels of temperature accuracy with minimal fluctuation (within 0.1C). The six-side heating system in combination with a low speed internal fan uniformly spreads air throughout the stainless steel chamber (without air exchange from the external environment). For applications requiring solely gravity convection, this internal fan can be disabled, significantly reducing the concern of sample to sample contamination. A beltless motor drive provides a horizontally circular shaking motion at a consistent 19mm orbit. The included platform (9.5 x 11.5 in.) can be used for low speed shaking of a variety of laboratory vessels, including Erlenmeyer flasks, culture plates and media bottles. For high speed mixing, a patented MAGic Clamp platform is available that allows for magnetic attachment of flask clamps and tube racks. INCLUDED: The Benchmark Incu-Shaker Mini CO2 Shaking Incubator includes: - 9.5 x 11.5 in Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

This Sanyo MIR 553 Refrigerated Laboratory Incubator was removed from a university lab where it was  (more)surplus to requirements. The unit is in good cosmetic condition with only limited usage marks. It has 4 shelves and a key with it. It powers up and has been tested with a digital thermometer (not included). When set at the lowest temperature of -15ºC our thermometer read 0.8ºC (The unit's internal thermometer read -0.2ºC)When set at 37.5ºC our thermometer read 38.2ºCWhen set at 50ºC our thermometer read 50.6ºC The lamp inside is in working order, but the exterior lamp doesn't seem to work. It may need a new lamp. Interior dimensions:D53cm x W65cm x H128cm

Foster Xtra XR 35 Blast Chillers Lab This item was removed from a university where it was surplus to (more) requirement. It is in good cosmetic condition and powers on, the previous client has stated it was in working order prior to removal. These items were previously used at a catering facility, so they do not require a decontamination procedure.

CryoBox Freezer Rack THERMO SCIENTIFIC 5038-4322 Brand new in original packaging For standard cryoge (more)nic boxes with ease with these durable stainless steel and aluminum freezer racks, which fit most standard chest freezers and upright freezers Part number: 5038-4322 For 12 standard Cryoboxes 12-place rack (4X3) Type: horizontal Dimensions: 22.5 x 44.4 x 14.3 cm (lxWxH)

Scilogex 24 x 1.5/2ml Plastic Rotor Kit with LidThe Scilogex 24 x 1.5/2ml Plastic Rotor Kit with Lid (more) accommodates 24 x 1.5/2ml centrifuge tubes and reaches a maximum speed of 14,000RPM. For use with DM1424 Hematocrit Centrifuge. Kit includes lid, fixing clips, and O'ring. INCLUDED: The Scilogex 24 x 1.5/2ml Plastic Rotor Kit with Lid includes: - Fixing Clips - O-Ring - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone 2.5L -50C Benchtop Freeze Dryer with PTFE coil and collector Features - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level Features Upright stainless steel collector coil holds 2.5Lof ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuumpump from costly damage: A vacuum break valve bleeds air into the system whenpower to the freeze dryer or vacuum pump is shut off for more than 5 minutes. Amoisture sensor prevents refrigeration or vacuum start-up when moisture isdetected in the drain line. Vacuum pump is automatically shut down when a leakis present in initial pull down or during run. INCLUDED: The Labconco 700202000 FreeZone 2.5L -50 C Benchtop Freeze Dryer with PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nXDS10i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Click Here to View Product Video INCLUDED: The Edwards nXDS10i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty