Benchmark H5000-HC MultiTherm Heating and Cooling Shaker

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Ohaus ISLD04HDG Incubating Shaker The Ohaus ISLD04HDG Incubating Light Duty Shaker is designed to in (more)cubate samples from 5° ambient to 65° C depending on the model and ideal for heating and shaking a variety of samples. The ISLD04HDG has an 8 lb (3.6 kg) capacity while the Incubating Microplate Shaker can hold up to four standard or deep well plates. Incubating-Cooling Mini Shaker is designed to hold two microplates or two optional modular tube blocks. The ISLD04HDG features LED displays with touchpad controls. The variable speed microprocessor control provides consistent, uniform shaking action. The microprocessor will display the last setpoint and will restart if power is interrupted. Triple eccentric drive with permanently lubricated ball bearings and maintenance-free brushless DC motor provides reliable service and continuous duty operation. Units slowly increase speed to desired setpoint to avoid splashing. Digital models feature overload protection. Audible and visual signals activate when the system detects obstruction or tray overload.INCLUDED: The Ohaus ISLD04HDG Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISLD04HDG Incubating Shaker Specifications Temperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range100 to 1200 rpmSpeed Accuracy± 2% of set speedTimer1 second to 160 hoursOrbit3 mm (0.12")Maximum Weight Capacity8 lbs (3.6 kg)Tray MaterialAluminumTray Dimensions (L x W)11 × 7.75" (27.9 x 19.7 cm)Interior Dimensions (L x W x H)11.3 x 8.3 x 5.7" (28.7 x 21.1 x 14.5 cm)Overall Dimensions (L x W x H)17 x 11 x 10.7" (43.2 x 27.9 x 27 cm)Ship Weight30 lbs (13.6 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(3) { background-color: #fffacd; }

Ohaus heavy-duty orbital shakers These models are designed to handle a wide range of applications, e (more)nsuring constant orbital shaking. Digital models offer accurate speed control for applications that require repeatable results. - Includes a tray and a rubber mat; over 70 accessories as an option - Maintenance free motor - Protect your samples. The increase function allows a gradual increase of the speed up to the set point, to avoid splashing. If so, a sensor detects the unbalance of the load and slows down the speed reaching a safer one Applications Cell cultures, solubility studies, extractions, suspensions and bacterial and yeast cultures, dyes / bleaches, immunoassays, protein studies, absorption techniques Display Easy-to-read independent LED displays with speed and time information, allowing the operator to view both settings simultaneously Operation Detachable three-wire cable and plug (included) Communication The RS232 interface provides one-to-one communication for data collection and unit control Structure Cold Rolled Steel (CRS) Construction features Integrated tray (457 x 610 mm) with non-slip rubber mat included

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes / bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates

Vortex Shaker Uzusio LMS VTX-3000L New equipment in its original packaging 2 modes: continuous rotat (more)ion or pulse rotation speed from 20 to 3000 rpm Dimensions (L x W x H): 130 x 155 x 155 mm Power supply: 220 vAC, 50 Hz., 20 W

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Benchmark C2417-2420H 24 x 1.5/2.0ml Hermetically Sealed Rotor The Benchmark C2417-2420H 24 x 1.5/2. (more)0ml Hermetically Sealed Rotor is for use with Benchmark MC-24 and MC-24R centrifuges. This rotor has a maximum speed of 13,500 RPM, and a maximum capacity of 24 x 1.5/2.0 ml. INCLUDED: The Benchmark C2417-2420H 24 x 1.5/2.0ml Hermetically Sealed Rotor includes: - Benchmark C2417-2420H 24 x 1.5/2.0ml Hermetically Sealed Rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V Chamber Volume 5 (more)0L Sterilization Temperature Range 105C to 135C Chamber Dimensions 11.8" x 28" (30 cm x 71 cm) Features - Space-saving design with lid opening upward. - Fully automatic drying cycle for solid loads uses heat and vacuum for faster and more efficient drying. - Lid safety interlock prevents lid opening when a cycle is in progress, the chamber is pressurized, or when the temperature exceeds 97°C. - Pre-vacuum cycle - vacuum pump removes air from the chamber when sterilizing solids such as glassware and pipette tips, thereby eliminating cold spots, and ensuring faster and more efficient sterilization. - One-touch lever to easily open and close chamber lid. - Liquid cycle for media and agar. - Process display shows the program progress selected and status of the sterilization cycle. - Cycle for wastes and glassware without drying. - Bacteria filter reduces re-contamination. - Door-closure sensor prevents a cycle from starting unless the door is closed properly. The HVP-50 Autoclave (with a 50-L chamber) is a self-contained, portable floor model mounted on casters. It occupies minimum floor space, operates at 120V, and can fit conveniently into many locations in the laboratory. Its many uses include the sterilization and drying of glassware, pipette tips, lab coats, wastes and also liquids such as agar and media. The HVP-50 can accommodate a 10-L fermenter, a 15-L carboy, a 19” x 24” biohazard bag, six 1-L flasks, twenty-one 500-mL bottles, 180 x 20-mm test tubes in two stacked baskets, or 270 x 13-mm tubes in three stacked baskets.INCLUDED: The Hirayama HICLAVE HVP-50 Floor-Standing Autoclave with Heat/Vacuum Drying, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Ohaus 30553085 4 x 750ml Swing Out Rotor The Ohaus 30553085 4 x 750ml Swing Out Rotor accommodates a (more) capacity of up to 4 x 750 ml. This rotor is designed for use with Ohaus FC5916, FC5916R series centrifuges and reaches speeds up to 4,500 RPM with a maximum RCF of 4,346 x g. INCLUDED: The Ohaus 30553085 4 x 750ml Swing Out Rotor includes: - Ohaus 30553085 4 x 750ml Swing Out Rotor - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IN750plus Natural Convection Incubator 749L, 115V Setting Temperature Range +20 to +80 °C C (more)onvection Type Natural Convection Chamber Volume 749 L (26.4 cu.ft.) Features - Set temperature range from +20 to +80°C, with a working range of at least 5°C above ambient - Precise temperature control with a resolution of 0.1°C, adjustable in Celsius or Fahrenheit - Advanced Control Technology with the ability to adjust parameters including air flap position, program time, and time zones - Fixed sterilization program (4 hours/160°C) for sterilizing the working chamber, ensuring a contaminant-free environment - AutoSAFETY system with integrated over- and undertemperature protection (ASF) and an audible/visual alarm for reliable safety - Durable interior made of stainless steel with deep-drawn ribbing and protected heating elements on all four sides - High-capacity chamber load of up to 661 kg with adjustable stainless steel shelving for flexibility in storage - Exterior constructed from textured stainless steel, providing superior resistance to corrosion and wear The Memmert IN750plus Natural Convection Incubator 749L, 115V offers an exceptional combination of precise temperature control and safety features for high-capacity applications. With a spacious 749-liter chamber, this incubator provides a temperature range from +20°C to +80°C, ensuring that your samples remain consistently within the desired conditions. The dual high-definition TFT-color displays of the ControlCOCKPIT adaptive digital PID-microprocessor controller allow for easy monitoring and adjustments. For enhanced precision, the system utilizes two Pt100 Class A sensors in a 4-wire circuit to mutually monitor temperature, ensuring optimal conditions even in demanding situations. The incubator also includes a fixed sterilization program for the working chamber, with 4-hour cycles at 160°C to maintain a sterile environment. Safety and durability are key features of the Memmert IN750plus. The AutoSAFETY system provides over- and undertemperature protection by automatically adjusting according to setpoint values, with alarms to alert users in case of deviations. The exterior is constructed from durable, textured stainless steel that resists corrosion and wear, while the interior features deep-drawn ribbing and large-area heating on all four sides for consistent heat distribution. The interior's stainless-steel design enhances the incubator’s longevity and hygiene, making it ideal for temperature-sensitive applications in laboratories and industrial settings. Additionally, adjustable shelving allows for flexible sample arrangements and can support a maximum chamber load of up to 661 kg, ensuring versatility for diverse lab requirements. INCLUDED: TheMemmert IN750plus Natural Convection Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Balance of the AS X7 series is an advanced analytical weighing device of the SYNERGY LAB line. The A (more)S X7 is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS X7 analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Colour Touch Screen The latest generation touch panel of 7” diagonal stands for comfort of operation, even when you have laboratory gloves on. The AS X7 analytical balances guarantee simple and intuitive communication due to wide selection of widgets. The widgets can be freely configured in accordance with user needs. Screen customization favours access to information and results directly from the home screen. The user can configure a complete set of buttons and assign it to a particular operation mode. He(she) can also define info and text fields. LevelSENSING System The in-built sensors measure tilt, and display graphic message on the weighing device screen. In accordance with GLP and GMP, the LevelSENSING system simplifies the adjustment, ensures an ongoing control of the level and informs about deviations. Internal Adjustment Modernized internal adjustment system guarantees accurate indications in extremely unfavourable conditions. SMARTLab AS X7 balances are equipped with a SMARTLab system of an extensive functionality. It ensures support and supervision over the mass measurement process and reduces hazard of error caused by so called „human factor”. Automatic adjustment Regardless of external ambient conditions, the automatic internal adjustment system guarantees 100% efficiency in eliminating balance sensitivity deviations. Sensors Touch-free operation and programmable sensors facilitate daily work and reduce the range of actions performed during the weighing procedure. Alibi memory Data safety is assured with the ALIBI memory, which is integrated into AS X7 balances. The memory enables record of up to 500 000 weighings and guarantees continuity of data collection over a long period of time. Wi-Fi Remote control of the balance via devices, operation of which is based on Android, IPhone, Windows10 systems. Data control Accessing information in the balance depends on the user's permission level. The administrator can manage three different permission levels. Automatic Weighing Records Reports on processes and partial weighings can be generated and sent for archiving via the USB to external devices. Ambient Conditions Monitoring Communication with RADWAG thermo-hygro-barometer allows monitoring of ambient conditions such as temperature and atmospheric humidity. Databases Information system of the AS X7 balances is based on 7 databases that enable operation of many users with numerous products, all the stored data can be subjected to analysis. Weighing data is recorded in 7 databases: • Operators (max 100 entries), • Products (max 5 000 entries), • Weighings (max 50 000 entries), • Packaging (max 100 entries) • Formulations (max 100 entries), • Customers (max 1000 entries), • ALIBI memory (max 512 000 weighings). Additionally it is possible to create formulation reports (max 500 reports). Communication Interfaces The functionality of AS X7 balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, DB9 tara/print, Ethernet, Wi-Fi. The additional USB port located on the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS X7 balances are equipped with Kensington Lock, which allows to secure the device against theft. Additional option: Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.