Benchmark H1001-M Incu-Shaker Mini Incubator Shaker

PHCBI CO2 Incubator Model MCO-170AICD-PE With Tray and Shelves Lab This item was removed from a univ (more)ersity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in excellent condition internally and externally. This item features the following: 4 x shelves: 47 x 45 1 x Stainless Humidity Water Pan: 44 x 25 x 7cm

Heraeus Kelvitron B 6030 Incubator This item was removed from a university lab where it was surplus  (more)to requirements. It is in fair cosmetic condition and powers on. The unit has been tested and is in good working order (thermometer not included). Specifications:- Model: B 6030 - Serial No.: 51017988

Thermo Scientific Heracell 150i Incubator Lab This item was removed from a university lab where it w (more)as surplus to requirement. It is in good cosmetic condition and powers on, however due to a suspected board fault an error was produced that prevented further testing. Therefore, it is listed as Spares/Repair.

Heidolph 36130520 Unimax 1010 Orbital Shaker w/ Heating Module and High Incubator Hood The Unimax 10 (more)10, often referred to as the incubating model, is an ideal fit for the modular incubator system. It's particularly suited for applications that call for a variable temperature control that can go as high as 65°C. This model is equipped with a 10mm shaking orbit, providing a gentle, carefully controlled motion perfect for delicate samples, while also being able to support both culture plates and Erlenmeyer flasks. Its digital display allows for the setting and continuous adjustment of the variable speed, ranging from 30rpm to 500rpm. The Unimax 1010 also features a digital process timer, enabling unattended operation that can be set anywhere from 1 to 999 minutes. Upon the elapse of the set time, an acoustic alarm will sound as a signal, following which the operation automatically comes to a halt. Known for its medium size, the Unimax 1010 can comfortably handle load capacities of up to 5kg.INCLUDED: The Heidolph 36130520 Unimax 1010 Orbital Shaker w/ Heating Module and High Incubator Hood includes: - Unimax 1010 Orbital Shaker - Heating Module - High Incubator Hood - Power Cord - Three Year Manufacturer's Warranty

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2022 Tested at 37 ° C and -2 ° C

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg

Heating thermostat from 20 to 100°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - Transparent polycarbonate bath up to 100°C - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Graph of heating performance of ECO Silver immersion thermostats with polycarbonate bath. Performance graph of the pump pressing on the six levels.

Anti-siphon system for treatment of hot sterilizer wastewater.

Including Three-Tier Cell Roller Base Capacity : 821.2L Cabinet Material: Cold-rolled steel, powder- (more)coated cabinet Shelves: 6 supplied  (19 max.) Temperature ramp and soak, up to 24 steps Temperature Range: 0° to 60°C Temperature Resolution: 0.1°C Temperature Uniformity: ±0.3 at 25° to 37°C Temperature Sensor: RTD Temperature Accuracy: ±0.1 at 25° to 37°C Compressor: 1/4hp, air-cooled Relative humidity control via steam generator from above ambient to 95% at 37°C Heat Output: 1750W (6000 BTU/hr.) at 220V Adjustable defrost timer; factory set for two 15-min. defrost cycles/24 hr. Refrigerant: CFC-free, R134A Certifications/Compliance: ICH, FDA, TAPPI, ASTM™ Dimensions (d x w x h): 782mm x 1011mm x 2034mm Dimensions Internal (d x w x h): 686mm x 787mm x 1524mm 220V / 50Hz Three-Tier Cell Roller Base (15 positions) Dimensions (d x w x h): 620mm x 757mm x 706mm 220-240V / 50-60Hz