Stuart SRT9D Roller Shaker Bench

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

These roller mixers provide a gentle, but highly efficient, rocking and rolling action. Control is t (more)hrough a simple on/off switch and the unit will run continuously at the fixed speed of 33 rpm. Recommended for mixing blood samples, viscous substances and liquid-solid suspensions where minimum aeration is required. Units can be used in incubators up to 60°C and humidity up to 80%, or in cold rooms down to 4°C. Most sizes of tubes, Bijoux, Universals and bottles can be accommodated, up to 100mm diameter. Number of rollers: 10 Speed: 33 rpm Amplitude: 16 mm Maximum load: 3.0 kg Controls: Analogue Timer: No Roller size (l x diameter): 300 x 30 mm Attention 120V!

230V, 50 Hz, 0.5A

Dimensions (H x W x D):    400 x 295 x 360 mm (2 decks) Weight: 1.85 kg Compatible roller bottles: U (more)p to 29 cm in length (incl. 3 cm lid), 10 – 12 cm of diameter Will be delivered with one bottle deck!!

Wheaton 6-Tier Roller Apparatus Cat No 348970CE This was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in good working order. The speed control knob is missing but can be adjusted with a flathead screwdriver. It is in good cosmetic condition with minor marks

VC 10 lite Input Pressure 1 to 1,050 mbar Measurement Range 1 to 1,100 mbar Temp. Measuring Max. 200 (more)°C Features - Valve cleaning function for long service life - High energy efficiency thanks to device-to-device communication: control of the circulator by connecting the vacuum controller with PC 1.3 data cable (available as accessory) - Integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion - VENT short key button allows pressure equalization during a running process - Program function: up to ten user-defined programs can be saved, with up to ten pressure/time sequences - USB / RS232 interfaces for connection with the laboratory software labworldsoft® - Electronic control system for improved process efficiency and higher solvent recovery rate - High energy efficiency thanks to device-to-device communication (vacuum controller to recirculating chiller) The IKA VC 10 lite VC 10 Vacuum Controller is a highly efficient and versatile device designed for optimal vacuum control in laboratory settings. It features a valve cleaning function for long service life and high energy efficiency through device-to-device communication. The controller can connect to a circulator via a PC 1.3 data cable (available as an accessory) for enhanced control. It includes an integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion. The VENT short key button allows pressure equalization during a running process. The program function supports up to ten user-defined programs with up to ten pressure/time sequences. Equipped with USB and RS232 interfaces, it easily connects with the lab software labworldsoft®. The electronic control system improves process efficiency and solvent recovery rate. The device supports a wide range of connection diameters and pressure units and features a ceramic Al2O3 vacuum sensor for accurate measurements. With a control range of 1 - 1100 mbar and a resolution of 1 mbar, it ensures precise vacuum control. The vacuum controller also includes a timer, temperature measurement capabilities, and a graph function. Compact and lightweight, with dimensions of 95 x 150 x 110 mm and a weight of 1.284 kg, it is suitable for various laboratory applications, offering robust performance and user-friendly operation.INCLUDED: The IKA VC 10 lite VC 10 Vacuum controller includes: - VC 10 lite - USB Cable - USB A to Micro-B, 2 m - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

F2 Mass Standard - knob weights, wooden box. Nominal value - 500 kg.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Four load cell ramp platforms

Ohaus VXMTDGB Multi-Tube Vortex Mixer Speed Range 1200 - 2400 rpm Capacity 4.5 kg Orbit 3.6 mm Feat (more)ures - High Capacity: Easily process up to 50 samples at one time with the Multi-Tube Vortex Mixer, customizable with six different tube racks and a post-extension kit. - Versatile Housing Options: Choose between an easy-to-clean, one-piece stainless steel housing ideal for clean rooms, or a more economical painted steel version. - Programmable Pulse Mode: Enhance vortex action for challenging samples with the digital model's programmable pulse mode, allowing you to adjust the pulse-on/pulse-off time interval. - Applications: Ideal for suspensions, genotyping, and high-throughput DNA and RNA testing in clinical labs. - Independent LED Displays: Digital models feature independent LED displays for speed and time, enabling the operator to view both settings simultaneously. - Robust Construction: Includes a stainless steel foam rack for 50 tubes (12 mm diameter) and interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter. *Similar Model Depicted The Ohaus VXMTDGB Multi-Tube Vortexers are ideal for high throughput sample processing. Interchangeable foam racks for vortexing tubes from 10 to 29 mm in diameter available. Vortexing action is created by securing the top of the sample in place while allowing the bottom to rotate freely in a 3.6 mm orbit. Suction cup feet reduce motion and prevent sliding on work surface. The VXMTDGB is microprocessor-controlled and run in continuous or timed mode. Digital models feature touchpad control for easy input of settings, and independent LED displays for speed/time. Timer displays elapsed time and when programmed, shuts off unit when time reaches zero.Digital models feature a programmable pulse mode which allows the user to adjust the pulse-on/pulse-off times between 1- 59 sec intervals, enhancing the vortex action by creating a more vigorous mix. The variable speed microprocessor control provides consistent uniform mixing action. Basic speed of 500 to 2500 rpm and time settings are adjusted with knobs using 1 to 10 dial settings. INCLUDED: The Ohaus VXMTDGB Multi-Tube Vortex Mixer includes: - 12mm Test Tube Foam Rack - Tray Pad Set (Top & Lower Pad) - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex Plate StandThe Scilogex Plate Stand includes the support rod and clamp. Plate size 12 x 8 i (more)n, rod length 31 in. INCLUDED: The Scilogex Plate Stand includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty