IKA Roller 6 Basic Shaker

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Bioptechs Delta T heated lid device, which will provide a condensate free optical surface on top (more) of a Delta T dish through which specimens can be trans-illuminated on a inverted microscope. It also provides a port for the introduction of gas above the specimen. The Delta T is unlike any other specimen-warming device. It transfers heat directly to the cells by means of an electrically conductive optically transparent coating on the underside of the glass surface on which the cells rest. Please familiarize yourself with its operation and characteristics before conducting an experiment. The temperature transfer capability of the Delta T is extremely fast.Therefore, any time a new dish is placed into the stage adapter you must first press the “Reset” button to tell the controller that it is regulating a new dish. If the controller has been left on without a dish in the stage adapter or the stage adapter has not been plugged in while the controller is on, the controller will go out of range attempting to regulate something that is not there! Pressing the “Reset” button brings the controller back to its proper starting point.

Oxford Cryogenics Cryostream Controller 600 Series with 171 Cold Head This system was removed from a (more) university where it was surplus to requirement. Both the Controller and Cold Head power on and communicate, we are unable to test them further at our facility. They are in good cosmetic condition. A data cable to connect the Cold head to the controller is included.

VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting The VACUU·SELECT complete cont (more)roller provides enhanced process efficiency to applications supported by a vacuum source such as a basic pump or a powerful vacuum network. The VACUU·SELECT controller has you covered. Use manual set-point-control for simple processes, run pre-defined applications at the touch of a button, or create your own application with simple drag-and-drop editing. The controller is available as a benchtop unit, ready for mounting on lab scaffolding, or as a built-in version for lab casework. The integrated controller includes the VACUU·SELECT vacuum controller, a check valve, and a chemical-resistant solenoid isolation valve. The ceramic vacuum sensor and venting valve are built right into the body of the VACUU·SELECT controller. The compact unit is easy to install and setup. With its intuitive, application-based interface, the controller offers predefined vacuum processes for all common laboratory applications. In the case of solvent evaporation, it detects the boiling pressure and then holds the pressure level stable using two-point control.INCLUDED: The VACUUBRAND VACUU-Select Complete Controller For Lab Scaffold Mounting includes: - VACUU·SELECT complete controller for lab scaffold mounting - Solenoid valve - Non-return valve - Integrated ceramic diaphragm vacuum sensor - Venting valve - Power supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex SCI-Fill Motorized Pipette Controller, 110-220V Aspiration Speed 25mL<7s (8 shift) Dispe (more)nsing Speed Motor (8 shift)/Gravity Charging Times 2-3 Hours Features - Easy switch between motor and gravity dispensing - LED display showing battery level and adjustable coarse speed - 8 levels of coarse speeds - Touch-sensitive triggers for fine speed control - 8 hours of continuous use per charge - Lightweight, ergonomic design - Wall mount and bench top controller stand - Zero downtime, use while charging SCILOGEX SCI-Fill Motorized Pipette Controller. Rugged, reliable, easy liquid handling in BSC and new lab benches. Including wall/bench stand and 2 x 0.45um filters. Switch parts with zero tools. The trigger buttons on the Sci-Fill are concave and touch-sensitive, so the pipette controller feels nice in your hands while giving you the fine control you need for delicate tasks. Every battery charge gives you 8 hours of continuous motorizing aspirating and dispensing. The pipette gun still does its job while charging, so there’s no downtime. INCLUDED: The Scilogex SCI-Fill Motorized Pipette Controller, 110-220V includes: - Mountable Wall Holder - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

B5 Haake F6 Circulating Water Bath F6 Laboratory Chiller Brand: HAAKE Voltage: 230V, 50Hz Current: 9 (more)A Power: 2100 VA Thermostat temperature range: -60 to 250ºC Water bath content: 4.5 L External dimensions (W) x (D) x (H): 21 x 37 x 37.5 cm Internal dimensions (W) x (D) x (H): 14 x 15 x 15 cm

Agilent Technologies Stratagene Mx3005P PCR System This was removed from a working lab where it was  (more)surplus to requirements. The unit powers up and has been tested with the PC. It communicates and operates well. The lab confirmed it was fully operational prior to removal. It is supplied with a Dell PC with MxPro 4.10 software installed. The system is in excellent cosmetic condition with minor marks. The MX3005P has the following filters installed: - CY5 - CY5 Filter Set - Excitation Wavelength(NM) 635 - Emission Wavelength(NM) 665. - CY3 - CY3 Filter Set - Excitation Wavelength(NM) 545 - Emission Wavelength(NM) 568. - ROX - ROX Filter Set - Excitation Wavelength(NM) 585 - Emission Wavelength(NM) 610 - HEX - HEX-JOE Filter Set - Excitation Wavelength(NM) 535 - Emission Wavelength(NM) 555 - FAM - FAM Filter Set - Excitation Wavelength(NM) 492 - Emission Wavelength(NM) 516 The total lamp hours are: 277:12.The timer was last reset: 28/09/2011. Includes: -Stratagene MxPro QPCR Software V4.10d-Software Certificate And Registration Packet-Agilent Data System Recovery Kit-Mx3005P Setup And User's Guide-Keyboard and mouse-Monitor +PC

Yamato SK-102C Compact Sterilizer 18L, 115V Temperature Setting Range 50°C to 126°C Timer 0 min. to (more) 999 min. Internal Capacity 18L Features - Easy to use - Option for an 18, 24 and 30 liter chamber - Powerful 2000W pipe heater - Easy to read 4 digit LED display - Programmable sterilizing and temperature functions - Timer Setting Range 0 to 999 min - Water level detection sensor - Safety valve - Safety interlocking interactive device The Yamato SK-102C Compact Sterilizer 18L, 115V is an advanced and user-friendly device designed for efficient sterilization. This 18L sterilizer, adaptable for 24 and 30 liter chambers, operates on a 115V system. It features a powerful 2000W pipe heater and a high-quality stainless steel SUS 304 interior, ensuring durability and reliable performance. The sterilizer offers a broad temperature setting range from 50 to 126°C and can handle a maximum operational pressure of 0.142MPa at its highest temperature. The temperature is easily controlled through a PID control by microprocessor and set using digital ▲▼ keys, with a clear 4-digit green LED display for monitoring. The sterilizer also includes a programmable timer ranging from 0 to 999 minutes. For safety, it is equipped with multiple features, including a water level detection sensor utilizing a liquid expansion method, a safety valve set at 0.165MPa, and a spring full lift safety valve, complemented by an interactive safety interlocking device. The internal dimensions of the sterilizer are ⌀280 x H292 mm, while externally it measures W380×D380×H629 mm, making it a compact yet efficient solution for various sterilization needs. INCLUDED: The Yamato SK-102C Compact Sterilizer 18L, 115V includes: - Rack - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Polyscience CA05A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VACFe (more)atures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA05A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA05A1T1-41AA1N Durachill Chiller with Turbine Pump, -10 to 70°C, 700 to 2900W, 120VAC SpecificationsPart NumberCA05A1T1-41AA1NCooling Capacity @ 20°C1.74 kWCooling Capacity @ 10°C1.29 kWCooling Capacity @ 0°C0.77 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range20 to 90 psi / 138 to 689 kPaMaximum Pump Flow Rate3.5 gpm / 13.2 lpmPower Requirements120V, 60Hz, 17.4AShipping Weight172 lbs / 78.1 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(7) { background-color: #fffacd; }