Erweka Copley TPK 2 2000 Valve-Box Critical Flow Controller Ventilbox

This Biometra TGGE System with Controller and TGradient was removed from a university lab where it w (more)as surplus to requirements. All units are in reasonably good cosmetic condition and powered up, unable to test further at our facility. System includes: Biometra TGGE SystemSerial Number: 1506138 Biometra TGGE System ControllerSerial Number: 1203176 Biometra TGradientSerial Number: 1910339

Durham Magneto Optics Ltd MicroWriter ML Photolithography Controller This was removed from a univers (more)ity lab where it was surplus to requirements. Everything powers up but has not been tested further. The PC contains quite a lot of software.The programs that are relevant to the system are:MicroWriter ML Version 2.11.11.0.Thorlabs apt configuration utility v2.2.5389 14611. MicroWriter ML will not start up properly as the hardware is not connected. This is not a fault, we just don't have the rest of the system The Newport Motion Controller/Driver Model XPS control unit is for a table that the microwriter would sit on.

MARSHALL Select MS-RE100 Tube Roller, 10-100 RPM Speed Range 10 to 100 RPM Number of Rollers 6 Maxi (more)mum Load 8.8 lb. (4 kg) Features - Rocking and rolling motion with a 24 mm amplitude ensures thorough mixing - Accepts tube diameters ranging from 6 to 34 mm, accommodating a variety of tubes - Roller length of 11 in. (28 cm) allows for simultaneous processing of multiple tubes - Equipped with a quiet, maintenance-free brushless DC motor for long-lasting reliability - LCD display provides clear monitoring and setting of speed and timer - Timer settings adjustable from 1 minute to 23 hours and 59 minutes or continuous operation - IP21 protection class secures the device against solid objects and minor water exposure - Rollers are designed for easy cleaning to maintain hygiene and efficiency - Ideal for mixing blood samples, viscous substances, and liquid-solid suspensions - Provides a safe and effective solution for various applications in medical and research labs The MARSHALL Select MS-RE100 Tube Roller is meticulously designed to provide a gentle yet highly effective mixing experience, perfect for handling delicate materials such as blood samples, viscous substances, and liquid-solid suspensions. This roller is versatile, accommodating a wide range of applications including the prevention of blood coagulation and immune precipitation. Equipped with a variable speed range from 10 to 100 RPM, the MS-RE100 offers precise control over mixing intensity. Its rocking and rolling motion, with a rocking amplitude of 24 mm, ensures thorough and uniform mixing. The device features six rollers, each 11 inches long, providing ample surface area for efficient and gentle rolling of multiple tubes simultaneously. The rollers are designed for easy cleaning, enhancing laboratory hygiene and maintenance. This tube roller is driven by a quiet, maintenance-free brushless DC motor, ensuring reliable long-term use without the need for frequent servicing. An LCD display allows for easy monitoring and adjustment of both speed and timer settings, with the timer capable of being set from 1 minute up to 23 hours and 59 minutes or continuous operation. With a maximum load capacity of 8.8 lb. (4 kg) and the ability to accept tube diameters from 6 to 34 mm, the MS-RE100 is a highly adaptable tool for any laboratory. The unit also features IP21 protection class, providing basic protection against solid objects and dripping water, ensuring durability and safety in a busy lab environment. INCLUDED: The MARSHALL Select MS-RE100 Tube Roller, 10-100 RPM includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 400x500 mm (A x B).

The covers for weighing platforms with roller conveyors. The rollers are made of stainless steel, an (more)d they are available in two options: with or without side limiters. Intended for scales with weighing pan 300×300 mm (A x B).

Vortem 1550 Shaking Incubator LABNET New equipment (never used) Complete with racks for 50 mL and 15 (more) mL tubes, 230V Temperature Range: Ambient +5° to 99°C Temperature Accuracy: ±0.5°C Speed Range: 200 to 900 rpm Motion, Orbit: Circular, 3mm Timer 1 to 99 min or continuous Capacity: 18 x 15 mL tubes or 8 x 50 mL tubes Dimensions: 10.2 x 12.2 x 12.2 in. (26 x 31 x 31 cm) Electrical: 230V~, 50 Hz

Thermo Scientific Multidrop 832 microplate dispenser The Multidrop 384 is an automatic, programmable (more), eight-channel microplate dispenser. It has a peristaltic pump for rapid and continuous dispensing of liquids into 96 and 384-well microplates. Dispenser of microplates 96 and 384 Accuracy, speed and reliability in dispensing. Possibility of dispensing by selecting the number of columns . External dimensions : 31x32x18 cm Weight : 7 Kg Dispensing accuracy: 5 µl: ±3% (typical) 20 µl: ±2% (typical) 100 µl: ±1% (typical) Dispensing speed: 96-well plate:20 µl in 5 seconds; 50 µl in 8 s 384 well plate: 20 µl in 20 s; 50 µl in 25 s Year of manufacture : 2005

Temperature control range: -5°C to 99°C Usable temperature range: from 30°C below room temperature t (more)o 99°C Temperature accuracy for 0°C: ±1.0°C 37°C: ±0.5°C 90°C: 1.0°C Heating rate: 5°C/min Cooling rate simple temperature operation: 6.0°C/min between 99°C and 25°C 1.5°C/min between 25°C and -5°C Temperature deviation across blocks: Max 0.2°C Dimensions (WxDxH): 220 x 250 x 125 mm Weight: 5 kg Excluding block

F1 Mass Standard - knob weights with adjustment chamber. Nominal value - 5 kg.

Thermo Scientific 75003608 Round Buckets for TX-750 Rotor The Thermo Scientific 75003608 Round Bucke (more)ts are designed to be used with the TX-750 Swing Bucket Rotor, and are capable of a maximum speed of 4,700 RPM and a maximum RCF of 4,817 x g. These buckets have a maximum capacity of 4 x 750ml and are made from high-quality materials that can withstand the rigors of high-speed centrifugation. However, it is important to note that no adapters or lids are included with this set of buckets. These round buckets are a versatile option for laboratories looking to process large volumes of samples, such as those used in cell culture or bioprocessing. Their compatibility with the TX-750 Swing Bucket Rotor allows for efficient and reliable centrifugation, and their high-speed capabilities make them suitable for a wide range of applications. While adapters and lids are not included with this set of buckets, they can be purchased separately to enhance their functionality and compatibility with different sample types. Overall, the Thermo Scientific 75003608 Round Buckets are a reliable choice for laboratories looking to process large volumes of samples with a high degree of efficiency and consistency. INCLUDED: The Thermo Scientific 75003608 Round Buckets for TX-750 Rotor includes: - Set of 4 x 75003608 Round Buckets - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003608 Round Buckets for TX-750 Rotor SpecificationsMaximum Speed4,700 RPMMaximum RCF4,817 x gMaximum Capacity4 x 750mlMaximum Radius19.5 cmRotor CompatibilityTX-750 Swing Bucket RotorDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Gilson MINIPULS 3 Peristaltic Pump (Drive Unit Only), 110V/220VFeatures - Utilizes positive displace (more)ment pump technology that allows liquid to flow nearly pulse free as a result of ten stainless steel rollers - Produces smooth flows with excellent accuracy and precision, even at high flow rates - Interchangable heads allow for an array of possible applications - Easy to operate, install, and maintain due to simplistic functionality - All control buttons are readily accessible and intuitive to use - Small lab footprint and with a weight of only 5.5 pounds the MINIPULS 3 is exceptionally portable. - Has a maximum flow range of 30 mL/min for standard models and 220 mL/min for high flow models - Remote start and stop possible The compact MINIPULS® 3 is a high-performance, low-pulse, peristaltic pump with interchangeable pump heads for delivering a diverse variety of liquids—from biological to chemical—without altering the critical components within the liquid. Six different channel and flow rate configurations are available.Pulse-free Liquid TransferUtilizing positive displacement pump technology, liquid flows nearly pulse-free as a result of as many as ten stainless steel rollers. The MINIPULS 3 produces smoother flows with excellent accuracy and precision, even at high flow rates. Its adjustable speed stepper motor and high-quality precision bore tubing assure reproducible flow rates.Flow Rates to Meet Your NeedsWith a choice of six quickly interchangeable pump heads, you’ll have a wide range of flow rates to use for your applications. • Four standard models (1, 2, 4, or 8 channels): 0.3 μL/min to 30 mL/min • Two high flow models (2 or 4 channels): 1 mL/min to 220 mL/minEasy to OperateMINIPULS 3 is easy to install, simple to operate, and easy to maintain. With an uncomplicated keypad control and easy-to-read LCD screen, access functions for start/stop, flow direction, increase/decrease flow rate, and prime. Remote control is also possible. (Please Note: A Pump Head is NOT INCLUDED and is required for operation, please inquire.) INCLUDED: The MINIPULS 3 Pump (Drive Unit) with One Channel, Standard Flow Head (R1) includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty