Bellco cell-production roller apparatus

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Bioptechs Delta T heated lid device, which will provide a condensate free optical surface on top (more) of a Delta T dish through which specimens can be trans-illuminated on a inverted microscope. It also provides a port for the introduction of gas above the specimen. The Delta T is unlike any other specimen-warming device. It transfers heat directly to the cells by means of an electrically conductive optically transparent coating on the underside of the glass surface on which the cells rest. Please familiarize yourself with its operation and characteristics before conducting an experiment. The temperature transfer capability of the Delta T is extremely fast.Therefore, any time a new dish is placed into the stage adapter you must first press the “Reset” button to tell the controller that it is regulating a new dish. If the controller has been left on without a dish in the stage adapter or the stage adapter has not been plugged in while the controller is on, the controller will go out of range attempting to regulate something that is not there! Pressing the “Reset” button brings the controller back to its proper starting point.

LEP MAC5000 73005020 Microscopy Stage Motor Controller Power Supply This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks. Model MAC 5000 73005020Serial No. 127383

This RHK STM100 Controller is being sold on behalf of a lab. It is surplus to requirements. The unit (more) is in full working order and in good cosmetic condition. It comes with the ISA Cards, Software, and cables required for it to function. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Eppendorf 5171 MicroManipulator + InjectMan Joystick Controller These items were removed from a univ (more)ersity where they were surplus to requirement. Both items are in good cosmetic condition and power up when paired together. We are unable to test them further at our facility.

Varian Turbo-V 250 Macro Torr Pump System This system was removed from a university where it was sur (more)plus to requirement. All elements are in good cosmetic condition and the blades move freely on the Varian Turbo-V 250 Macro Torr Pump. The Multi-Gauge controller powers on, we are unable to test it further at our facility. We are unable to test further at our facility. All items included in the system: 1 x Varian Turbo-V 250 Macro Torr Pump:Model no. 9699008S016 1x Multigauge controllerPart no. V209600 1 x Turbo-V 250 Controllers Instruction manualModel 969-9423Model 969-9523Model 969-9425 1 x Turbo- V 250 Pumps Instructional manual969-9007 Series969-9008 Series 1 x Multigauge Controller Instruction manual.Part no. L8350301 1 x Multigauge RS232 Board instruction manualPart no. L6439309 All cables shown in the images are included.

Ohaus PR124 analytical balance with draft shield The PR Series Precision and Analytical Balances ens (more)ure competitive performance at an affordable price and offer accuracy and repeatability in essential weighing applications in the laboratory, industrial and educational environments. Equipped with RS232 connectivity for easy communication, a backlit display and a simple interface for easy operation, the PR series scales are perfectly designed for your workstations. Applications Basic Weighing, Piece Counting, Percent Weighing Display Backlit liquid crystal display (LCD) Operation AC adapter (included) Communication RS232 (one port included) Structure ABS upper armor, removable stainless steel plate, removable glass screen with sliding top door, integrated weigh below hook, safety bracket, calibration lock Construction features User selectable environmental filters, brightness adjustments, auto tare, auto dimming, user selectable measuring range adjustment points, software lock and reset menu, user selectable communication settings and print options , user-configurable project and user ID, software overload and underload protection indicator, stability indicator Find out how to navigate the Ohaus PR series menu:

Memmert ICH260 Stability Climate Chamber 256L, 115V Temperature Range -10°C to 60°C w/o Humidity (+ (more)10°C to 60°C w/ Humidity) Humidity Control 10 to 80% RH Chamber Volume 256L (9 cu. ft.) Features - Superior temperature and humidity homogeneity for reliable stability testing - Complies with international standards like ICH, WHO, EMA, ASEAN, GMP, GLP, GCCP - Active humidification and dehumidification system for precise control - Large-area air jacket on four sides ensures effective thermal transfer - Hermetically sealed interior for efficient water usage once setpoints are reached - Dual high-grade platinum temperature sensors with mutual monitoring for continuous operation - Double doors with wide-area interior glass to prevent contamination and temperature fluctuations - Intuitive operation with Memmert ControlCOCKPIT and AtmoCONTROL software - Constructed from high-quality, corrosion-resistant stainless steel - Integrated data logger and multiple interfaces for advanced programming and documentation options - Condensation-free operation within specified temperature-humidity ranges - Programmable temperature and humidity ramps via AtmoCONTROL software The Memmert ICH260 Stability Climate Chamber 256L, 115V sets the standard for stability testing, excelling with its precise control of both temperature and humidity, essential for rigorous testing standards such as ICH, WHO, EMA, ASEAN, GMP, GLP, and GCCP. This climate chamber offers a temperature range of -10°C to 60°C without humidity and +10°C to 60°C with humidity, alongside a humidity control range of 10 to 80% RH. Its exceptional temperature and humidity homogeneity is achieved through a large-area air jacket on all four sides and a digitally controlled active humidification and dehumidification system. A notable feature of the ICH260 is its double-door design, which includes a wide-area interior glass door to prevent contamination and maintain temperature stability while providing clear visibility of the chamber's contents. The chamber's interior is hermetically sealed, ensuring efficient water use once the desired setpoints are reached, provided the door remains closed. Additionally, the chamber is equipped with two high-grade platinum temperature sensors with mutual monitoring to ensure uninterrupted, reliable operation even if one sensor fails. Operation is made simple with the Memmert ControlCOCKPIT and AtmoCONTROL software, which allow for intuitive navigation and easy programming of temperature and humidity ramps. The ICH260 is almost exclusively made from high-quality, corrosion-resistant stainless steel, making it both durable and easy to clean. A wide range of programming and documentation options are available through its interfaces, integrated data logger, and software, ensuring that this climate chamber is not only robust but also adaptable to various scientific and industrial applications. INCLUDED: TheMemmert ICH260 Stability Climate Chamber 256L, 115V includes: - 2 x Stainless Steel Wire Shelves - Water Tank w/ Connection Hose - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

An additional anti-draft chamber dedicated for mass comparators APP KO series. It is intended for in (more)struments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator’s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.

The MW-04-2 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, RS485. The MW-04-2 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-2 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, RS485 may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-2 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.