Packard Multiprobe ll EX Robotic Liquid Handler Spares/Repairs Lab NOTE - THIS IS A SPARES/REPAIRS ITEM

Packard Multiprobe ll EX Robotic Liquid Handling System This was removed from a university lab where (more) it was surplus to requirements. The system powers up and operates but a fault was discovered during testing. The report " Encoder not detected on four tip arm Z1 motor" is displayed and halts the self-test. It is in good cosmetic condition with marks from use but is sold for spares/repairs. Included with it are; Dell Optiplex 745 PC running on Windows XL with WinPrep software for handling systemDell 17" monitorDell windows keyboardA collection of deck holding plates and reservoirs for handling systemTwo original user manualsPower and connecting cables

Thermo Matrix PlateMate Plus Automated Liquid Handling System This was removed from a university lab (more) where it was surplus to requirements. The unit powers up and is in good working order. The unit communicates with the PC and appears to be in working order. It is in good cosmetic condition with a small chip in the casing. Included with it are; LG 24" MonitorThinkcentre PCLenovo Keyboard & MousePC Password Letmein01 Software installed:-Matrix ControlMate V1.3.38 Accessories:-Control PanelNalgene 10L Bottle3 x Packs of Matric D.A.R.T.s Disposable Automation Research Tips 30ul (1 sealed,2 opened) 96 well 30ul head.

This Beckman Coulter Biomek NXp Laboratory Automation Workstation was removed from a university lab  (more)where it was surplus to requirements. Everything powers up and the system is in good cosmetic condition with some marks from use. There appears to be an issue with at least one of the injectors. When we attempt to 'home' the robot head it will start to home the various parts, then stall and with an error code 'error homing: Y2 Axis error: Motion error; the axis was unable to perform the specified move. (0100) We believe the issue is with the #2 injector side-to-side motor. The up-and-down motor appears to run well. This error makes it impossible to home the system. So it could not be tested any further. The system comprises of; 1 x Beckman Coulter Biomek NXp Laboratory Automation WorkstationCat no. A31840Unit dimensions - W77 L92 H98cm 1 x IBM ThinkCentre PCMT-M 8113-DA1Biomek Software Version 3.3 installed. 1 x Lenovo MonitorType - 9227-AC1 1 x Lenovo Keyboard 1 x IBM Mouse 2 x Nalgene 2 Gallon Waste/Supply Bottles Box of Accessories:-Beckman Coulter AccuFrameBeckman Coulter Vacuum Valve UnitPower AdaptorVarious cables8 x 2ml Tube holders (24 tube slots in each)94 x 2ml tubesVacuum Manifold Base23mm Spacer Collar PN 71975136mm Collar3 x Thermo Scientific 96 well 0.2ml plates.

TTP Labtech Mosquito X1 Low Volume Hit Picking Liquid Handling System This unit has been professiona (more)lly recertified and is in full working order. It will need to be calibrated with samples upon installation. It is in excellent cosmetic condition with minor marks from use. Included with it are;1 x Dell Laptop (has Mosquito software installed) 1 x Mosquito Control Software Version 3.11.0 Disc (Includes manuals)1 x Mosquito Quick start guide2 x Boneco Humidifiers with power supplies

Single-channel electronic pipette F81044 GILSON P300M 20 to 300 µl Model P300 M: 20 to 300 µl Manufa (more)cturer reference: F81044

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on the weighing platform. The platform scales C315.4 series is made of mild steel powder coated construction of the weighing platform. The platform comprises 4 load cells connected to an terminal PUE C315 series featuring backlit LCD display and 5 function buttons. The weighing platform and the terminal are connected through a long cable enabling hanging the terminal on a wall. The C315.4 series is available in pit version for easy placing heavy loads on the weighing platform without application of ramps. Scales is available in dual range version on surcharge.

Fast and Stable Measurement It only takes a second for the balance to display the final measurement  (more)result. Weighing Heavy Loads with High Accuracy On the large weighing pan of a PM balance, you can weigh a load of 120 kg with a readability of 0.2 g and second-to-none repeatability. Minimum Eccentricity Error Over the Entire Range PM balances can be used to determine the mass of irregularly shaped components with a centre of gravity that is significantly shifted from the weighing pan axis. Parameter Stability Over Time and After Transport The mechanical design is resistant and robust, allowing you to maintain the correct metrological parameters after transport and despite long and intensive use. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.01 g on the 200 x 185 mm weighing pan and with a readability of 0.2 g on the 500 x 400 mm weighing pan. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails New, lmproved The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. 5Y Terminal With Terminal 5Y you get a 10-inch display, Digital Weighing Auditor, multi-step user verification, ambient light alerts, hotspot, RFID*, live note voice and text notes, voice commands for the balance and handy measurement history within the handy library widgets Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring. * RFID ISO/IEC 14443 Type A, 13,56 MHz

Polyscience AD28H200-A11B 28L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz3 (more)D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AD28H200-A11B 28L Heated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Intuitive 3.75” (9.5 cm) display with touch-pad control 4 languages: French, German, Spanish, English Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485 and external temperature probe On-screen prompts Automatic performance optimization and specific heat tuning Single-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AD28H200-A11B 28L Heated Circulator, Advanced Digital (Ambient +10 to 200C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

HRC 2 basic Working Temp. -20°C to 100°C Pump Pressure Max. .5 bar Flow Rate Max. 21 l/min Features  (more)- Speed-controlled refrigeration system with 400 W cooling capacity - Speed-controlled pump make of PEEK: (0.5 bar; 22 l/min) - 1500 W heating capacity (1200 W @115V) - Digital level indicator - Safety classification III (FL) according to DIN 12876 - Adjustable temperature safety circuit The compact refrigerated and heating circulator HRC 2 basic is renowned for its high energy efficiency, a working temperature powerful infinitely range from -20°C to 100°C and a variable pressure and suction pump. The on-demand and speed-controlled compressor reduces noise and operating costs. The high-quality Isolation of the 4 l bath allows fast heating and reduces heat input when cooling. Using the external temperature control circuit is possible for up to 2.5 l thermofluid without a refill.The integrated hopper and drain valve ensure a safe and clean handling of the thermofluid. The easy-to-open front flap allows an easy cleaning of the cooling unit’s air filter. There is a drain valve on the front side of the bath. A hose can be connected to empty the bath, so the user does not get in direct contact with the thermofluid.INCLUDED: The IKA HRC 2 basic Cooling and Heating Circulator, 2-5 l, basic includes: - Power Cord - Two Year Manufacturer's Warranty

IKA Eurostar 400 Digital Overhead Stirrer Speed Range 0/6 to 2,000 RPM Viscosity Max. 100,000 mPas (more) Stirring Quantity Max. 150 l Features - Digital speed display - Infinitely adjustable speed - Push-through agitator shafts - Overload protection - Short-term overload operation - Slim casing - Quiet operation - Error code display Powerful laboratory stirrer for high viscous applications and intensive mixing for quantities up to 150 l (H2O). It automatically adjusts the speed within the range of 0/6 – 2000 rpm (two speed ranges) through microprocessor controlled technology. Integrated safety circuits ensure automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft to desired speed is performed and variations are adjusted automatically. This ensures constant speed even with changes in viscosities of the sample.