Freezer F380 B Medical Systems

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

Hettich 4615-A 2-drawer rolling cabinet Model: 4615A for centrifuges Swivel castors + two brakes - 2 (more) drawers with keys With mats in the bottom of the drawers One of the drawers is equipped with an adjustable divider Dimensions (W x H x D): 770 x 550 x 650 mm Equipped with swivel castors and two brakes. Compatible with the Rotina 420R and Rotanta 460R models

Chariot inox 2 plateaux - dim. ext. L x l x h (mm) : 850 X 540 X 940 4 roues pivotantes anti-bruit ø (more) 100 mm, dont 2 à frein 4 butoirs d'angle Capacité de charge : 60 kg/chariot et 30 kg/étagère Equipement Neuf, encore emballé

LABORATORY FREEZER manufactured by B Medical Systems Design and comfort of use - 7” touchscreen with (more) easily accessible temperature display in the door handle - Minimal ice formation allowing for easy defrosting - NFC card/password protected door lock mechanism - USB port and SD card slot for easy export of -41°C setpoint data - Modular internal equipment - Easy access to lower drawers - High quality stainless steel and other materials for durability Accurate temperature control and 24/7 monitoring - Uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Intelligent automatic defrost technology that allows for a stable temperature during the defrost cycle - Automatic shutdown of the evaporator fans each time the door is opened to reduce heat transmission - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - °B Universal software option for remote monitoring; reporting in accordance with FDA 21 CFR Part 11 and long-term archiving in combination with a data communication unit Energy efficient and eco-friendly performance - High cooling efficiency thanks to natural refrigerants in compliance with US SNAP and EU F-Gas regulations - Insulated interior doors, sealed gaskets, improved frame to minimize cold air loss and heat conduction - Frost prevention which reduces the pressure on the compressor - High quality stainless steel structure with antibacterial coating and injected polyurethane foam that provides high thermal insulation and storage capacity The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical sheet in Italian or in English for all the details.

The special transport containers of B Medical Systems are made of polyethylene, by rotational moldin (more)g and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests. - Extremely light - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates External dimensions W x D x H (mm): 588 x 288 x 437 Internal dimensions L x W x H (mm): 245 x 460 x180 Insulation: 50-60 mm Storage capacity (gross volume of bags): 8 (450ml) / 14 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 57 h at 43°C outside: up to 16.39 h Compliant with ADR, RID, IMDG, ICAO-TI, IATA-DGR, Class IIa medical device according to MDD 93/42 / EEC

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Perkin Elmer Optima 2100 DV Optical Emission Spectrometer was removed from a university lab whe (more)re it was surplus to requirements. The instrument powers up but we were unable to test it further at our facility. The lab did inform us though, that it was fully working prior to removal. It is in very good cosmetic condition with only minor marks from use.

Cepa Z-41 High Speed Centrifuge This was removed from a university lab where it was surplus to requi (more)rements. The unit powers up and is in working order. It runs on a timer delay so takes a few moments to start working. It is in good cosmetic condition.

IKA Microstar 30 Control Overhead Stirrer Speed Range 0/30 to 500 RPM Viscosity Max. 20,000 mPas St (more)irring Quantity Max. 20 l Features - Hardened glass enclosed, fast response display for maximum visibility and chemical resistance - State-of-art vibration sensors detect deviations from permissible thresholds and automatically stop the process - Clear display for all essential information at a glance - Integrated timer / counter for the control of kinetic sensitive reactions and reminders - Viscosities up to 20,000 mPas and volumes of up to 20 l - Continuously adjustable speed between 0/30 – 500 rpm - USB interface, e.g. for documenting parameters using labworldsoft® or installing firmware updates - Intuitive and simple handling; touch-sensitive surface for long service life - Temperature reading on display - Chemical resistant housing - Key lock function - Microprocessor-controlled speed governor for constant rotational speed, even with changes in viscosity The new MINISTAR series by IKA: Developed using the latest cutting-edge technology, these high-tech overhead stirrers with compact designs are ideal for special applications. Combining high performance with particular excellence, they require minimal space and come with a lifetime guarantee. These products offer incredible stirring capabilities and control, making them a great cost-effective option for laboratories. With features like hardened glass enclosed displays, state-of-the-art vibration sensors, and microprocessor-controlled speed governors, the MINISTAR series ensures precision and reliability.Capable of handling a wide range of viscosities and volumes, these stirrers provide continuously adjustable speeds, making them versatile and efficient for various applications. See for yourself:

Gilson MyPIPETMAN Select Multichannel P8x200, 20-200 uL PipetteFeatures - Designed to be ergonomic,  (more)safe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 20 to 200 uL - 3 Year Manufacturer's Warranty