Thermo Scientific Finnpipette Stepper 4540 Pipette 3-Pack 10 to 5,000 µL

Gilson MyPIPETMAN Select Multichannel P8x20, 2-20 uL PipetteFeatures - Designed to be ergonomic, saf (more)e, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 2 to 20 uL - 3 Year Manufacturer's Warranty

OMNITIP™ Starter ST 300 µl tips are high quality laboratory accessories designed for pre (more)cision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 300 µl Colour: transparent Set contains: box, 6 racks and 576 tips Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

XA17 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 17 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

R-PIPETTES PC software is a RADWAG proprietary solution for determination of errors of pipette volum (more)e measurement (batchers) in accordance with the standard ISO 8655. The software supports calibration of fixed volume pipettes (single channel) and adjustable volume pipettes (single channel). The program features database of RADWAG pipettes and enables defining custom pipette models.

Triumph Metal Cabinet This item was removed from a university laboratory where it was surplus to req (more)uirements. It is in reasonable, used cosmetic condition. The cabinet features two shelves, each measuring 95 x 41.5 cm, and an internal drawer with dimensions of L89.5 x W38 x H24.5 cm. Includes: - 2 sets of keys

This item has just arrived in our stock. Please enquire for further details.

IKA KS 4000i Incubator Shaker Type of Movement Orbital Heating Temp. Range Room Temp. +5° - 80 °C Sp (more)eed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order seperatly This innovative incubator shaker offers unattended operation in a controlled environment, featuring a large LED display for speed and time settings, antimicrobial-coated controls, and integrated PID temperature control using dual PT 1000 sensors. It includes an electronic temperature and speed control, a timer switch for up to 999 hours, and an optional built-in cooler for external cooling unit connection. Safety features include automatic shutoff when disturbed or when the hood is lifted. With a permissible shaking weight of 20 kg, a speed range of 10-500 rpm, and a heating temperature range from room temperature +5°C to 80°C, this unit ensures precise and reliable operation for various laboratory applications.

Hoefer SUB20 Maxi-Standard Submarine Gel Electrophoresis Unit Gel Dimensions (W x L) 20 x 20 cm Maxi (more)mum Power Settings 1000 V, 500 mA, 500 W Maximum Buffer Volume 2.2 L Features - Large format‐20 x 20 cm gel tray is ideal for high resolution techniques - Multichannel pipette compatible combs—with a maximum 40 sample throughput reduce gel loading time - Color-coded and height adjustable combs—easily identify comb thickness at a glance and control well depth - Buffer recirculation ports—may be connected to a peristaltic pump for buffer recirculation during electrophoresis to maintain buffer pH and prevent ionic gradient formation - Colored loading strips—for easy well detection when loading - UV-transparent running tray—allows the user to image the gel without risk of damage due to handling - Side handles—for safe and easy transportation around the laboratory The Hoefer SUB20 Maxi-Standard Submarine Gel Electrophoresis Unit is a powerful, large-format system designed to support high-resolution analytical and preparative nucleic acid studies. With a spacious 20 x 20 cm gel tray featuring four comb positions, this unit accommodates up to 168 samples, making it ideal for labs requiring high-throughput and precision in nucleic acid analysis. The SUB20’s versatile design includes multichannel pipette-compatible combs, reducing gel loading time and allowing for efficient sample handling. Equipped with color-coded, height-adjustable combs, the SUB20 allows easy identification of comb thickness and precise control over well depth. Its buffer recirculation ports, compatible with a peristaltic pump, help maintain buffer pH and prevent ionic gradient formation, ensuring consistent results. The UV-transparent running tray enables safe gel imaging without handling, while colored loading strips simplify well detection during loading. Compact and convenient, the SUB20 features side handles for safe transport around the lab, and casting gates that create a secure, hassle-free seal without the need for tape. INCLUDED: The Hoefer SUB20 Maxi-Standard Submarine Gel Electrophoresis Unit includes: - Buffer Chamber Assembly - Safety Lid - High Voltage Leads - Running Tray with Casting Gates - 1 mm thick, 16 well combs, 2 pcs - Colored Loading Strips - Buffer Recirculation Ports, 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Max capacity: 4x 100 mL Max density: 1.2 kg/dm³ Speed: 18000 rpm Force: 23907 RCF Dimensions (WxDxH) (more): 420 x 490 x 300 mm Weight: 24.5 kg Equipped with: 1x Hettich 1624 swing-out rotor (max 4000 rpm) 4x Hettich 1381 bucket 4x Hettich insert (4 tubes (∅xL) 18 x 100 mm)

The MicroCal DSC Automated system delivers high throughput and sensitivity, with low sample consumpt (more)ion, in an integrated platform for increased productivity. All cell filling and cleaning functions are fully automated, for walk-away operation. Automated data analysis supports the generation of high integrity thermal stability data and delivers compliance with regulatory requirements, whilst allowing easy integration into existing data handling and transfer systems. Screens up to 50 samples per day with unattended operation Automated cell filling and cleaning Standard 96-well plate sample format Thermostatically-controlled storage of up to 6 plates Measurement of very tight binding constants, up to 10²⁰/M Including software