Sartorius Stedim BioSealer Calibration-Holder Kit

Sartorius Stedim 16374 Calibration Kit & Specially Designed Holder for BioWelder This was remove (more)d from a working lab where it was surplus to requirements. We believe it is new and unused.

Sartorius Stedim BioSealer Calibration-Holder Kit This was removed from a working lab where it was  (more)surplus to requirements. The unit looks to be unused but has been opened. It is in excellent cosmetic condition with minor marks.

Particle Plus Handheld 8303 This item was removed from a university lab where it was surplus to requ (more)irements. The unit powers up and is in good cosmetic condition, we are unable to test it further at our facility. Item includes the following: Certificate of calibrationPower Supply 15V ~2amp 100-240VACCarry caseTripod and plateUSB Cable 6' 

This listing is for a Sartorius YCW623 2KG / F1 Weight. The unit is in full working condition and i (more)s ready for immidate realese. The Sartorius YCW623 2kg Knob Weight is a high-precision metrological weight designed for use in laboratory and industrial settings. It meets OIML Class F1 standards, ensuring accuracy for calibrating balances and scales. Made of highly polished, non-magnetizable stainless steel, this weight is highly corrosion-resistant, making it durable and reliable in various environments. With a density of 8.0 g/cm³, it is ideal for labs requiring strict adherence to quality control protocols such as GLP and GMP. Key Features: OIML F1 classification for precise calibration Material: Polished stainless steel, non-magnetizable, and corrosion-resistant Nominal mass: 2kg Supplied in a protective case for safe handling and storage This weight is ideal for use in laboratories requiring high precision and compliance with international standards.

HANNA HI97715C ammonia photometer with case, up to 10.0 mg/L New equipment in its original packaging (more) HI97715C is delivered in a carrying case with 2 measuring cuvettes, plastic stoppers and caps, cleaning cloths, scissors and batteries. Range: 0.10 to 10.00 mg/L (NH₃-N) Resolution: 0.01 mg/L Accuracy at 25°C: ±0.05 mg/L ±5% of reading Method: Adaptation of the “ASTM Manual of Water and Environmental Technology, D1426-92”, Nessler Method Light source: LED with 420 nm narrow bandwidth filter Light detector: Silicon photocell Batteries/Lifespan: 3 x 1.5 V AA / > 800 measurements without backlight On-demand storage: Up to 50 measurements for on-screen recall Auto-off: After 15 minutes of non-use / After 30 min of non-use before a measurement Dimensions/Weight: 142.5 x 102.5 x 50.5 mm/380 g standard solutions expired: 08/2022

Shaker for flask rotation Heidolph Reax 20. Capacity for two bottles with a maximum diameter of 136  (more)mm and 160 to 270 mm in height. Adjustable speed from 1 to 16 rpm. Ignition switch with signal light. Quick and easy fixing of jars. Dimensions 470*490*520mm; 25 kg. User manual. The Heidolph Reax 20 rotary jar shaker is equipped with an adjustable speed motor that provides a stable continuous rotation movement. The fixing system, with a tension spring, allows you to securely hold and accommodate wide-neck glasses and jars up to a diameter of 136 mm and between 160 and 270 mm in height. Designed to work with wastewater and sludge.

MPS Y device consists of the electromagnetic module of high resolution and Y operation panel equippe (more)d with LCD. It has been designed to be easily integrated into customer-owned weighing systems, and therefore can be built either into technological line or inside weighing devices or laboratory equipment. The MPS Y allows to perform the measurements using the under-pan weighing method or a regular weighing pan. In case of the under-pan method the load is suspended beneath the module. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2xUSB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi. MPS.Y can also be integrated with E2R Weighing Records and E2R PGC.

Ohaus ISWV02HDG Waving Incubating Shaker The Ohaus ISWV02HDG Incubating Waving Shaker combines the u (more)nique vertical and horizontal "wave" motion with general purpose incubation in one compact bench top unit. The ISWV02HDG is designed to incubate samples from 5° above ambient to 65° C to provide accurate and repeatable results. Waving shakers offer a smooth, low-foaming three-dimensional "wave" motion. The ISWV02HDG features LED displays with touchpad controls. Both models include safety features that protect both the user and samples. Equipped with LED displays and touchpad controls for temperature, speed/tilt angle and time. Timer will display elapsed time or when programmed to a set time, will turn off when time reaches zero. Microprocessor control provides electronic tilt angle adjustment, allowing easy adjustment in 1° increments for tilt and 1 rpm for speed while unit is running. PID controller for precise temp. control. Units slowly increase speed to desired setpoint to avoid splashing, and feature overload protection. Audible and visual signals will activate when system detects an obstruction or overload of the tray.INCLUDED: The Ohaus ISWV02HDG Waving Incubating Shaker includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty Ohaus ISWV02HDG Waving Incubating Shaker SpecificationsTemperature RangeAmbient +5° C to 65° CTemperature Uniformity± 0.5° C at 37° CSpeed Range1 to 30 rpmSpeed Accuracy± 1 rpmTilt Angle0 to 20°Timer1 second to 160 hoursMaximum Weight Capacity5 lbs (2.3 kg)Tray MaterialAluminumTray Dimensions (L x W)9.25 x 7.25" (23.5 x 18.4 cm)Interior Dimensions (L x W x H)10.75 x 7.75 x 3.4" (27.3 x 19.7 x 8.6 cm)Overall Dimensions (L x W x H)17 x 11 x 10.5" (43.2 x 27.9 x 26.7 cm)Ship Weight22 lbs (10 kg)Comparison of ModelsSpecificationOhaus ISHD23HDGOhaus ISLD04HDGOhaus ISLDMPHDGOhaus ISLDMPHDGLOhaus ISRK04HDGOhaus ISWV02HDGTemperature RangeAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CAmbient +5°C to 65°CTemperature Uniformity± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°C± 0.5°C at 37°CSpeed Range15 rpm to 500 rpm100 to 1200 rpm100 to 1200 rpm100 to 1200 rpm1 to 50 rpm1 to 30 rpmSpeed AccuracyAbove 100rpm +/- 1%, Below 100rpm +/- 1 rpm± 2% of set speed± 2%± 2%± 1 rpm± 1 rpmOrbit25 mm (0.98")3 mm (0.12")3 mm (0.12")3 mm (0.12")N/AN/AMaximum Weight Capacity50 lb (22.7kg) @ 125 rpm, 10 lb (4.53kg) @ 500 rpm8 lbs (3.6 kg)4 microplates or 2 micro-tube racks4 microplates or 2 micro-tube racks10 lbs (4.5 kg)5 lbs (2.3 kg)Tray Dimensions (L x W)18 x 18" (457 x 457 mm)11 × 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)11 x 7.75" (27.9 x 19.7 cm)10 x 7.5" (25.4 x 19.1 cm)9.25 x 7.25" (23.5 x 18.4 cm)Overall Dimensions (L x W x H)23.5 in x 32.1 in x 26.6 in17 x 11 x 10.7"17 x 11 x 7.75"17 x 11 x 7.75"17 x 11 x 10.5"17 x 11 x 10.5".comparison-table tr td:nth-child(7) { background-color: #fffacd; }

Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only) The Hermle 4 x PCR rotor with a her (more)metically sealed lid is designed for use exclusively with Hermle Z216 series centrifuges. It has a maximum speed of 15,000 RPM, generating a maximum relative centrifugal force (RCF) of 15,343 x g, making it ideal for a variety of PCR applications. The rotor can accommodate up to 4 strips of 8-PCR tubes, providing ample space for PCR experiments. The rotor has an angle of 45°, which facilitates effective separation of samples. The hermetically sealed lid provides a safe and secure environment for samples and prevents contamination due to aerosols. Overall, the Hermle 4 x PCR rotor is an excellent choice for PCR applications in a laboratory setting, providing consistent and reliable results. INCLUDED: The Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris Precision Balance, 3200 Grams Accuris Precision balances quickly and accurately display samp (more)le measurements on a large, backlit LCD screen. Utilizing highly precise, gold plated ceramic capacitance sensors, these balances tare and stabilize quickly and provide reliable weight measurements within 0.001 grams. Six models are available in the Precision Balance range, covering a wide range of maximum capacity requirements. The larger capacity models (1200g, 3200g, and 5000g) feature a more traditional top-loading design, come with larger weigh pans and have readability to 0.01g All models feature a control panel with a large, bright back-lit LCD screen that is easy to use and easy to see. The advanced software includes weighing modes for standard weighing, piece counting, percent deviation and also check weighing for component inspection. INCLUDED: The Accuris Precision Balance, 3200 Grams includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty