Matrix Thermo Scientific 8-Channel Equalizer electr. Pipette 5-250 µl 2032-11

Manufacturer: Agilent P/N: 5061-3361 Description:Agilent Rigid Capillary Tubing10 cm x 0,17 mm Items (more) delivered:- 10 SS caps Condition:The caps are new.

GILSON p200 micropipettes (20-200 microliters). They are supplied calibrated-sterilized and free of  (more)RNase.

This job lot of items come from a variety of university laboratories. The items were no longer requi (more)red, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-27385 2 x Boxes of Long GlasswareITEM-27382 Black Container of mixed glasswareITEM-27383 Box of Mixed Small GlasswareITEM-26089 Incubator TraysITEM-40020 Unnamed Microplate Reader parts Spares/RepairsITEM-26088 Incubator TraysITEM-26087 Incubator TraysITEM-26086 Incubator TraysITEM-26090 Freezer rackingITEM-28308 Electrothermal Heating MantleITEM-28321 High pressure arc lampITEM-28311 Grant WaterbathITEM-28316 Biodine Fractional Horsepower GearmotorITEM-28312 Unknown plastic componentsITEM-28314 Mixed lab accessoriesITEM-28315 IKA-Werke Type: VX2ITEM-28313 Mass spectrophotometer tubesITEM-28320 Corning Incubator/OvenITEM-28317 Edwards Thermocouple 507ITEM-28309 Oertling GC121/00ITEM-28318 Medexxa HTC100ITEM-28303 Millipore Masterflex PumpITEM-28304 UVP Mineral LightITEM-28310 Unknown Metal ComponentsITEM-28305 FisherBrand PF-1502ITEM-28299 Bio-Rad Sub-Cell Model 192ITEM-30030 Brunel MicroscopeITEM-30036 Leybold Didactic MicroscopeITEM-30033 Motic MicroscopeITEM-27884 Vickers Instruments MicroscopeITEM-26017 IBM ThinkPad Docking StationITEM-05099 opticon bar code readerITEM-26082 Random PartsITEM-26079 Box of cables and pump partsITEM-25523 Grant Water BathITEM-13323 Smart Wireless U-RX UHF Radio Mic ReceiveR AV EquipemntITEM-27885 Vickers Instruments MicroscopeITEM-27886 Vickers Instruments MicroscopeITEM-27887 Vickers Instruments MicroscopeITEM-27888 Vickers Instruments MicroscopeITEM-27889 Vickers Instruments MicroscopeITEM-27904 Vickers Instruments MicroscopeITEM-27891 Vickers Instruments MicroscopeITEM-27905 Vickers Instruments MicroscopeITEM-27892 Vickers Instruments MicroscopeITEM-27893 Vickers Instruments MicroscopeITEM-27898 Vickers Instruments MicroscopeITEM-27895 Vickers Instruments MicroscopeITEM-26025 Kramer Tools VP-211 Automatic VGA/Audio SwitcherITEM-04659 Panasonic Telephone

This Agilent 5183-2003 Nitrogen Gas Generator was removed from a university lab where it was surplus (more) to requirements. The system has not been tested at our facility. It is in good cosmetic condition with marks from use. The lab confirmed it was in good working order prior to removal.

MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul Volume Range 0.1 to 2.5ul Adjustable or Fixed Volume A (more)djustable Pipette Type Manual Air Displacement Features - Ergonomic design minimizes user fatigue and risk of repetitive strain injuries - Lightweight and low-force operation enhances comfort during extended use - Large display window for clear volume identification - Integral tip ejector facilitates access into narrow tubes, improving usability - Compatible with universal pipette tips, increasing versatility - Easy to calibrate and maintain, ensuring long-term reliability - The lower part of the pipette is autoclavable for easy sterilization - Manufactured from innovative materials for durability and performance - Quality tested according to ISO8655-2:2002 standards for assurance of accuracy - Ideal for use in various laboratory applications requiring precise volume measurements The MARSHALL Select MS-P2.5UL Pipette is a precision instrument designed for meticulous laboratory work, offering adjustable volume settings from 0.1 to 2.5ul with fine increments of 0.05ul. This manual air displacement pipette features an innovative thumb plunger mechanism for smooth volume adjustment, ensuring precise control during experiments. Engineered with ergonomics in mind, this pipette boasts a lightweight, low-force design that significantly reduces the risk of repetitive strain injuries, making it ideal for prolonged use in demanding laboratory environments. The large display window prominently shows the volume setting for easy identification immediately, enhancing usability and accuracy. Additional features include an integral tip ejector that facilitates access into narrow tubes, increasing its versatility across various applications. The pipette is compatible with universal pipette tips, broadening its applicability. For maintenance, the lower part of the pipette is autoclavable, allowing for straightforward sterilization without compromising the integrity of the device. Manufactured from innovative materials and quality tested according to ISO8655-2:2002 standards, the MARSHALL Select MS-P2.5UL Pipette is not only durable but also ensures consistent performance and reliability, making it an essential tool for any laboratory focused on precision and ergonomics. INCLUDED: The MARSHALL Select MS-P2.5UL Pipette, 0.1-2.5ul includes: - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V Operating Temperature Range 100°C t (more)o 1150°C Max. Temperature Reaching Time ~70min. Internal Capacity 9L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 9L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - Year Manufacturer's Warranty

VACUUBRAND VACUU-VIEW Extended Vacuum Gauge Upper Measuring Limit 1100 mbar/hPa (825 torr) Lower Me (more)asuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Vacuum Sensors Integrated Features - Precision and chemical resistance in an exceptionally wide range from atmosphere down to 10-3 mbar, one gauge only for both rough and fine vacuum - Compact design with integrated sensors for useful setup in laboratory and process - The chemical resistant combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures a long product life even with aggressive chemicals - Illuminated display, easy to read - Display with menu driven handling, easy to use e.g. for unit settings For the monitoring of your vacuum processes in the rough and fine vacuum range, the new vacuum gauges VACUU·VIEW extended are perfect! The heavy duty combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures reliable readings in the wide range from atmosphere down to 10-3 mbar.INCLUDED: The VACUUBRAND VACUU-VIEW Extended Vacuum Gauge includes: - Kit Hose Nozzle DN 6/10 mm - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.