12 x Boxes Thermo Scientific D.A.R.T.S - Disposable Automation Research Tips

QIAGEN Plasmid Plus Giga Kit The box has been opened but none of the contents have been used. Conte (more)nts are as follows; 5 QIAfilter Mega-Giga Cartridges Elution Buffer 55ml (Qty.2) Endotoxin Reduction Buffer 480ml (Qty.1) Wash Buffer Concentrate 100ml (Qty.1) Neutralization Buffer 280ml (Qty.2) Binding Buffer 160ml (Qty.4) Lysis Buffer 150ml (Qty.4) Resuspension Buffer 150ml (Qty.4) RNase A LyseBlue (Qty.4) Plasmid Plus Giga Spin Columns (Qty.5) Tube Extenders 400ml (Qty.5) Collection Tubes 50ml (Qty.10)

This FluidX Xcap Model:HT124C was removed from a university lab where it was surplus to requirements (more). This item powers up and is in good cosmetic condition. It has not been tested further.

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-37808 Fistreem AquaRec WDA300 UV Water Deioniser PurificationITEM-37813 Bio Rad Bio-Plex System Luminex 100 ITEM-37815 EIC Lab IncubatorITEM-37506 Eppendorf Mastercycler GradientITEM-37816 Bio Rad Luminex XYP MultiplexingITEM-37817 Collection of 4 Walker All in One Fumigation Units ITEM-37818 IKA Werke RCT Basic Heated Stirrer ITEM-37540 Philip Harris Model N30C Lab Oven ITEM-37541 Pharmacia pH MonitorITEM-37505 Hanna HI 2210 pH MeterITEM-37543 Wild Heerburgg M40A Microscope ITEM-37545 Sanyo MSE Micro Centaur Centrifuge ITEM-37546 Clifton NE2D Heated Water Bath ITEM-37550 Spectra Physics CDRH Laser Controller and Two Small Lasers ITEM-37557 AID Elispot Microplate ReaderITEM-37559 Luminex SD Sheath Delivery Unit ITEM-37563 Stands Stepper Motor Controller 8SMC1 ITEM-37561 Polar Cold Reaction Vessel ITEM-37562 Camlab Kreo-Lite HiscopeITEM-37565 Job Lot of Small Lab Glassware 96 Pyrex Test Tubes, 250 Fisher Culture Tubes

This was removed from a university lab where it was surplus to requirements. We were unable to test  (more)the unit as it was not supplied with the PSU Max Pressure: 1.5/22 Inlet.bar/psi: 1.5/22 Working.Elga LC197 - Biofilter fitted - Expiry Date 2020-02.Purelab Flex Purification Pack LC208 fitted - Batch No. G34/17 Use By: 16/01/20.

Double Screen Media Unit by Isomi This item was removed from a university lab where it was surplus t (more)o requirement. It is in very good cosmetic condition. The unit features two 32" IR touch screens with built-in PCs. However, only the one screen is operational; the other does not power on and is non-functional. Due to the partial functionality, this media unit is listed for spares or repairs. It has Xibo Client Software installed. Features - 2 x 32" IR touch-screen including PC as standard - Runs on Windows 7 - 1 x Extended USB Port

Multivac A300/51 Vacuum Sealer This was removed from a university lab where it was surplus to requir (more)ements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. As it has been used in a lab setting it is only suitable for lab use again in the future. It is not to be used for commercial catering or food packing.

Protex Ventilated Workstation Model/Type - VB FH This was removed from a university lab where it was (more) surplus to requirements. The unit is in reasonably good cosmetic condition with minor marks from use. It has not been tested as it needs a power cable wired up. Workstation surface - 140 x 70cm Cabinet dimensions L95 W55 H54Internal - D49.5 W94 H53

This listing is for a Nikon Optiphot 2 Objectives Microscope. The unit is in full working condition (more) and is ready for immediate release. Objective Lenses supplied: Plan 100 Din 10 Nikon Optiphot 2 Microscope Overview The Nikon Optiphot 2 is a biological trinocular microscope that excels in user-friendly and economical phase contrast microscopy. Its finite optical system allows for high-quality imaging, catering to a variety of biological specimens. Key Features: Equipped with a phase contrast turret condenser, it allows users to switch between Darkfield and Brightfield settings, enhancing contrast for transparent specimens without staining. Quintuple Revolving Nosepiece: This feature accommodates multiple objectives, including plan-achromats and plan-apochromats, as well as objectives for epi-fluorescence, making it versatile for various imaging techniques. HFX Microflex Photomicrography System: The inclusion of the HFX Microflex system enables high-quality photomicrography, allowing users to capture detailed images for documentation or analysis. CF Optical System: The CF optical system improves the clarity and sharpness of images, crucial for detailed examinations in biological research. Large Rectangular, Rotating Mechanical Stage: The spacious mechanical stage enhances manoeuvrability and ease of specimen placement, facilitating detailed examinations. 50W Halogen Kohler Lighting: The microscope features a 50W Kohler lighting system, providing uniform illumination, which is essential for phase contrast techniques. Dimensions: The microscope measures H52 x D48 x W24 cm, making it a compact yet robust instrument suitable for most lab spaces. Lamp Specifications: Operates on 240V 50Hz, with a 12V 50W halogen lamp, ensuring reliable and consistent performance.

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020. It is in good cosmetic condition with minor marks. Included with it are; Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS softwareSeveral manuals, safety, performance and maintenance schedule, pre-installation and operationNew and used spare skimmer and sampler conesSpare electron multipliernew and used spare printed circuit boardsVarious tubing and connectorsPacket of various Thermo O ringsMany other unidentified small parts in sealed packaging

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.

Ohaus PX4202 Pioneer Precision Balance, 4200 g, 0.01 g Maximum Capacity 4,200 g Readability 0.01 g R (more)epeatability (Typical) 0.01 g Features - Maximum capacity of 4,200 g with a readability of 0.01 g - Stainless steel weighing pan with an 180mm diameter for durability - InCal™ semi-automatic internal calibration for maintaining accuracy - Backlit 2-line LCD display with additional information or guidance on the second line - 1-second stabilization time for quick and reliable measurements - Durable construction with a cast metal lower housing and plastic top housing - USB and RS-232 connectivity for easy data communication - Static removal bar for convenient grounding and reducing static interference - Integrated weigh-below-hook for specialized weighing applications The Pioneer PX combines essential weighing functionality with competitive performance, offering high accuracy and repeatability for applications in laboratory, industrial and education settings. The PX is affordably priced, intuitively designed for intelligent operation with a second line display for additional information, and USB and RS-232 connectivity for easy communication. Click Here to View Product Video INCLUDED: The Ohaus PX4202 Pioneer Precision Balance, 4200 g, 0.01 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark Heat Block, 48 x 0.2ml / 6 x 8-tube PCR strips The Benchmark Block, 48 x 0.2ml tubes or 6  (more)PCR strips of 8 tubes each is for use with any Benchmark Dry Baths. INCLUDED: The Benchmark Heat Block, 48 x 0.2ml / 6 x 8-tube PCR strips includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty