Lab Oven SLW 53 POL-EKO

CS 60 BASIC PVC - CHEMISAFE CABINET - Completely made with a thickness of 18 mm in HD PVC - Extracto (more)r cover and plinth completely made of cold pressed steel sheet 1.0 mm thick, with epoxy coating with acid-resistant epoxy powders electrostatically applied at a temperature of 200°C, which guarantees a layer thickness greater than 90 microns on the entire surface of the cabinet - Monocoque structure built on a 15/10 mm base with adjustable leveling feet - Division into 2, 3 or 4 compartments to store the different families of non-flammable chemicals separately - Simple hinged swing doors - Key lock - Door opening at an angle of 110° which allows the shelves to be extracted without tilting them - Corrosion-resistant plastic outer zipper - Compartments equipped with containment shelves made of PVC adjustable in height - Connection collar Ø 125 mm - Available with or without suction unit - Modular solutions - Tray shelves - Standardized pictograms according to ISO 3864 standards - Complies with EN 61010-1 standard Supplied: 3 PVC shelves (max load 40 Kg evenly distributed). Optional: - Shelves - Timer - Door open alarm - Ventilation

Table on wheels but can also turn out feet, these feet can also withstand vibration. Dimensions (WxD (more)xH): 1780 x 1660 x 720 mm

Cell Bank Fersht Group Dewar Lab This item was removed from a university where it was surplus to req (more)uirement. It is in good cosmetic, but we are unable to test it further at our facility. Also included: 6 x Container Sample Racks 1 x Skate on Wheels

Isolation Table - White Lab This item was removed from a university where it was surplus to requirem (more)ent. It is in good cosmetic condition, we are unable to test it further at our facility.

Carbolite Type OAF 11/1 Ashing Muffle Furncace This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in full working order to 1100˚C. It is in good cosmetic condition with marks from general use.

Leica EG1140H Paraffin Embedding Center & EG1140C Cold Plate This was removed from a university  (more)lab where it was surplus to requirements. We tested both units with a digital thermometer (not included). 1 x Model - EG1140 HCat no. 038831690Top tray - 30 x 15.5 x 8cmSide trays - 26 x 16.5 x 4cm The unit powers on and heats up on side plates and top, the thermometer was showing temperature readings of up to 50°c when on a setting of 55°c. The light does not work. 1 x Model - EG1140 C-1Cat no. 038831679The unit powers on with the plate cooling. The temperature cooled to as low as -4°c after running for around 20 minutes. Both units are in a reasonable, used cosmetic condition with marks and stains.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Nikon BioStation Controller BS-ERG 810240 Lab This item was removed from a university where it was s (more)urplus to requirement. It is in good cosmetic condition and goof mechanical order, we are unable to test it further at our facility.

This BECKMAN Model J2-21 Floor Standing Centrifuge was removed from a university lab where it was su (more)rplus to requirements. The unit is in full working order but is not supplied with a rotor. It is in reasonably good cosmetic condition but has cracks on the door hinge and latch.

HX7 HR scale’s multi functions The HX7 HR scale is a device comprised of AISI 304 (IP66 / IP68 (more)) stainless steel terminal the PUE HX7, and AISI 316 (IP 68 / 69K) stainless steel weighing platform. The HX7 HR has been designed to operate in challenging conditions, even in places where the platform is exposed to acids. Display The 7” colour graphic display and the diode bar graph, which signals current net weight of a load in reference to the scale range or declared min, max thresholds, boost comfort especially in case of piecework where fast and precise presentation of product mass deviation is required with regard to the limit values. Hermetic communication interfaces Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Software The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

IKA A 10 basic Process Type Batch Speed Max. 25,000 RPM Feed Hardness Max. 5 Mohs Features - Digital (more) timer - Counter: Display of grinding time - Interval function - Brushless motor for long service life and low noise level - Integrated cooling connections - Error code display - Simple handling with keypads - Easily exchangeable beater/cutter for a variety of applications - Grinding chamber reduction for small sample sizes and stainless steel cutter A 10.1 included with delivery - Bayonet lock for lid to enable simple and safe locking The redesigned batch mill grinds hard, brittle, soft and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber; tough, oily and aqueous samples can also be grinded. The development of the mill placed particular emphasis on safety. The mill will only start when the lid is closed and can only be opened at standstill. A quick stop feature further increases the safety of the user. Test results of the new A 10 basic are comparable with the ones of the previous model A 10, due to the same grinding chamber, cutter geometrics and speed.INCLUDED: The IKA A 10 basic Analytical mill, 115V includes: - A 10 basic - A 10.1 Stainless steel cutter - A 10.4 Grinding chamber reduction - Clips for cooling hose (2 pcs.) - Felt rings (2 pcs.) - Tool kit - Power Cord - Two Year Manufacturer's Warranty