Lab Oven Smart SLW 115 POL-EKO

MEMMERT UF 75 oven with forced convection 300°C Equipment used only a few times In its original pack (more)aging. Year of manufacture: 2023 Model: UF75 oven / incubator - new generation Capacity: 74 Liters Temperature range: Ambient +10°C / +300°C Integrated digital temperature display 2 stainless steel shelves Power supply: 230 V Frequency: 50-60 Hz Power: 2500W External dimensions (L) x (D) x (H): 585 x 514 x 944 mm Internal dimensions (L) x (D) x (H): 400 x 330 x 560 mm Weight: 66kg SingleDISPLAY

Additional technical features: - External structure in steel painted with antiacid epoxy powder - In (more)ner chamber in stainless steel - 45 mm hole on the rear side for flue gas discharge with device for opening / closing the passage of cables, probes, etc. - 10 mm hole on the upper side for inserting the thermometer or probes - Temperature control with microprocessor - Adjustable safety thermostat - Safety class 3.1 - 4 work programs of 8 segments - Repeatability With the optional software you can control the operation of the programs in a very simple way and have all the data under control. Specifically, you can: - Create charts - Archive the history - Check and see all processes on a graph - Optimize times Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel

Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V Te (more)mperature Range Ambient +5°C to 70°C Heater Power 1.34 kW Chamber Volume 445L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 445L glassware drying natural and forced convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Mobile on casters. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-840C Natural/Forced Convection Glassware Drying Oven with Sterilization Lamp 445L, 115V includes: - 4 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UN260 Natural Convection Oven 256L, 115V Temperature Range Ambient +5°C to 300°C Convection (more) Type Natural Convection Chamber Volume 256 L Features - Spacious 256 L (9 cu.ft.) stainless steel chamber for diverse sample sizes - Temperature range from +5°C above ambient to +300°C for various applications - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature control - SingleDISPLAY digital PID-microprocessor with high-definition TFT color display - Natural convection system provides uniform heating throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air - Supports up to 9 stainless steel grids, with a max load of 263 lbs - Auto diagnostic system and overtemperature monitor for enhanced safety The Memmert UN260 Natural Convection Oven 256L, 115V offers versatile laboratory heating with a spacious 256 L (9 cu.ft.) stainless steel chamber, ideal for a range of sample sizes. Its temperature range from +5°C above ambient to 300°C and precise control, enabled by a Pt100 sensor DIN class A in a 4-wire circuit, ensure optimal accuracy. Equipped with a SingleDISPLAY digital PID-microprocessor and high-definition TFT color display, this oven makes temperature adjustments intuitive and precise. The natural convection system promotes uniform heating, and the electronically adjustable air flap allows controlled pre-heated fresh air intake. Built to support up to 9 stainless steel grids with a maximum load of 263 lbs, the UN260 also includes an auto diagnostic system and overtemperature monitor for safe, reliable operation in demanding environments. INCLUDED: The Memmert UN260 Natural Convection Oven 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V Temperature Range Ambient +10°C to 2 (more)60°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 150L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports Programmable 150L forced convection constant temperature oven with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-602C Programmable Forced Convection Oven 150L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Corning ACI oven / incubator

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer Temperature Setpoint Range  (more)-15°C to -25°C Capacity 30 Cu. Ft. Defrost Method Manual Features - Offers a combined storage capacity of 30 cubic feet, with 25 cubic feet as a refrigerator and 5 cubic feet as a freezer. - Meets NFPA and OSHA guidelines for Hazardous Location, Class 1, Division II, Groups C & D. - Utilizes R404a refrigerant with dual defrost modes—cycle defrost for the refrigerator and manual defrost for the freezer. - Built with high-density urethane foam insulation and a powder coat steel exterior, enhancing durability and thermal efficiency. - Features leveling legs that allow for stable placement and easy installation in various operational environments. The Corepoint Scientific ERF302WWW-0 Hazardous Location Refrigerator/Freezer offers a comprehensive solution for the safe storage of sensitive materials in environments with stringent safety requirements. This unit provides a total storage capacity of 30 cu. ft., with 25 cu. ft. allocated to refrigeration and 5 cu. ft. to freezing, making it highly suitable for diverse laboratory needs where both cooling and freezing are required under controlled conditions.Designed to meet NFPA and OSHA guidelines for Class 1, Division II, Groups C & D hazardous locations, the ERF302WWW-0 ensures all electrical components, including the compressor and thermostat, are isolated and sealed within vapor-proof enclosures. This precaution significantly reduces the risk of spark generation in volatile environments. The unit features a solid, right-hinged door with a magnetic gasket for a positive seal, heavy-duty handles, and three adjustable shelves in the refrigerator for flexible storage solutions. Power cord is not included - final power connections at site must be hardwired to meet local codes. INCLUDED: The Corepoint Scientific EF301WWW-0M -15C to -25C Hazardous Location Freezer includes: - 3 Adjustable Shelves (Refrigerator) - Leveling Legs - Key for Door Lock - Operator's Manual - 1 Year Manufacturer's Warranty

Branson M2800 Mechanical Ultrasonic CleanerFeatures - Sweep frequency eliminates standing waves and  (more)creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, as well as the ability to set continous operation Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features: Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change. Click Here to View Product Video INCLUDED: The Branson M2800 Mechanical Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Temperature Range: 5° to 40°C Cooling Capacity: Up to 5000 watts (60Hz) 4400 watts (50Hz) Temperatur (more)e Stability: ± 0.1°C Certifications/Compliance: CE, CSA Semi S2 Pump Capacity: 56.8 L/min at 2.3 bar