Drying Oven Smart SLW 400 POL-EKO

SANYO MIR-152 refrigerated incubator / oven - with forced convection -10 / 50 ° C Model: SANYO PHCBI (more) MIR 152 refrigerated and ventilated Capacity: 126 liters Temperature range: -10 ° C to 50 ° C Glass on the front Integrated digital temperature display 1 shelf With internal lighting Cable passage: Ø 30 mm (on the left wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 220 W, Internal dimensions: 62 x 38 x 55 cm Overall dimensions: 70 x 58 x 102 cm Weight: 70 kg Tested at 37 ° C and 4 ° C

MEMMERT ICO150 Co2 incubator / oven Equipment in new condition, never used. MEMMERT reference: ICO15 (more)0 Year of manufacture: 2023 Forced convection Volume: 156 liters Stainless steel chamber Screen with large display Temperature: amb +5°C up to +50°C IR probe CO₂: 0 to 20% 1 stainless steel water tray included per incubator Visual and audible alarms Sterilization at 180°C without needing to remove probes Dimensions L x D x H int. : 719 x 591 x 1066 mm Dimensions L x D x H ext. : 560 x 400 x 700 mm Temperature: ambient +5 to 50°C Weight: 92 kg Gross weight: 116 kg Side sheet slightly deformed (see photo) This in no way hinders the proper functioning of this equipment.

Additional technical features: - External structure in steel painted with antiacid epoxy powder - In (more)ner chamber in stainless steel - 45 mm hole on the rear side for flue gas discharge with device for opening / closing the passage of cables, probes, etc. - 10 mm hole on the upper side for inserting the thermometer or probes - Temperature control with microprocessor - Adjustable safety thermostat - Safety class 3.1 - 4 work programs of 8 segments - Repeatability With the optional software you can control the operation of the programs in a very simple way and have all the data under control. Specifically, you can: - Create charts - Archive the history - Check and see all processes on a graph - Optimize times Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel

The universally applicable lab oven U is Memmert’s classic appliance for temperature control in scie (more)nce, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology. Working temperature range: ambient +10 to 300°C Setting accuracy temperature: up to 99.9 °C: 0.1 / from 100 °C: 0.5 Setting temperature range: 20 to 300°C Fan: forced air circulation by quiet air turbine, adjustable in 10% steps Fresh air: Admixture of pre-heated fresh air by electronically adjustable air flap Vent: vent connection with restrictor flap Capacity: 108 L Max loading per shelf: 20 kg Max loading total: 175 kg Internal dimensions (WxHxD): 560 x 480 x 400 mm Dimensions (WxHxD): 745 x 864 x 584 mm Weight: 74 kg

Memmert UN75plus Natural Convection Oven 74L, 115V Setting Temperature Range +20°C to +300°C Convec (more)tion Type Natural Convection Chamber Volume 74 L (2.6 cu.ft.) Features - 74L internal volume for versatile sample sizes - Precise temperature control from +5°C above ambient to +300°C for a wide range of applications - Equipped with TwinDISPLAY, featuring two high-definition TFT-color displays for advanced control - 2 Pt100 sensors in a 4-wire circuit for reliable temperature monitoring and control - Natural convection for uniform temperature distribution without forced airflow - Pre-heated fresh air admixture with electronically adjustable air flap for optimal temperature uniformity - Comprehensive safety features, including AutoSAFETY with over- and undertemperature monitoring - Easy-to-clean stainless steel interior reinforced by deep-drawn ribbing for durability and hygiene The Memmert UN75plus Natural Convection Oven 74L, 115V offers exceptional performance for temperature-sensitive applications, with a large 74L internal volume to accommodate a wide range of samples. This advanced laboratory oven features precise temperature control, with a working temperature range of +5°C above ambient up to +300°C. Its highly accurate 2 Pt100 sensors in a 4-wire circuit ensure consistent temperature readings, while the TwinDISPLAY digital PID-microprocessor controller with two high-definition TFT-color displays provides intuitive adjustments and real-time feedback. Designed for efficiency, the Memmert UN75plus includes natural convection for even heat distribution, as well as the option to adjust the airflow with an electronically adjustable air flap. The durable, easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing, ensures long-lasting performance and hygiene. Safety features such as the overtemperature monitor, mechanical temperature limiter, and integrated AutoSAFETY system protect against overheating, while the AtmoCONTROL software allows remote monitoring and data logging for precise control and documentation. INCLUDED: TheMemmert UN75plus Natural Convection Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample proce (more)ssing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The instrument is controlled by Windows PC software. This software allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays. Liquid handling: 1 ml thinner Disposable tips: 300 or 1100 µl Pipette range: Simultaneous operation of 4 plates Precision (samples and reagents): CV < 8.0% at 10 µl, CV < 2.5% at 100 µl Level sensor: Electronic Clot detection: Yes Mixing: Yes (pre-dilution tube and microplate) Multipipetting: Yes (sample, control and reagent) Pipetting time samples: < 18 min/96 wells (100 µl/well) Pipetting time reagents: < 4 min/96 wells (100 µl/well) Carry-over: None Identification: Barcode scanner for primary vessels, controls and reagents, Barcode scanner for microtiter plates Tube: Diameter 10-16 mm, Height 55-100 mm Barcode type: 2/5 interleaved, UPC A & E, 2/5 IATA, 2/5 Industrial, EAN 8 of 13, Code 128, EAN 128, Pharmacode, EAN addendum, 2 of 5, Code-a-bar Capacity: Maximum 240 sample tubes Capacity: 4 separate incubators Temperature range: 5°C above room temperature to 50°C Accuracy: ± 1°C average of the plate Consistency: ± 0.7°C/whole plate Shaking: Lengthwise Capacity: Up to 4 wash buffers Wash head: 1 x 8 Pipette volume: 200 – 2500 µl/well, depending on the assay Precision: ± 5% CV at 300 µl Residual volume: < 2.5 µl in round-bottom wells, < 4 µl for flat-bottom wells Level sensor buffer: Yes Level sensor waste container: Yes Wash programs: 1 to 9, depending on the assay Incubation time: 1 to 999 seconds, depending on the assay Pipette pressure: Adjustable for each assay individually Measurement: Vertical with photodiodes, Extinction or kinetic measurement Channels: 8 Operation: Single or double, with second measurement when the measuring range is exceeded Spectrum: 400 – 700 nm Filter: Up to 8 positions are available, of which 5 are already on board (405, 450, 492, 550, 620 nm) Measurement time: < 10 seconds Dynamic range: – 0.100 to 3,000 absorption units Linearity: 0 –2,000 absorption units ± 1.0% Precision: ± 0.005 absorption units or 2.5% Dimensions (WxDxH): 1130 x 760 x 1000 mm Weight: 130 kg

dimensions (hxwxl): 215x210x195 mm

Yamato LT-400AA Complete Overhead Stirrer with Stand &amp; 60mm 4-Blade Propeller, 115V Speed Range  (more) 10~300rpm Max Torque 0.9N•m (9.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with higher torque for high viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 10~300 rpm. INCLUDED: The Yamato LT-400AA Complete Overhead Stirrer with Stand &amp; 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Fluorescence microscope Leitz Laborlux 12. Binocular. Clear field and fluorescence. Köhler lighting. (more) 10x eyepieces. Objectives corrected to infinity: EF 10 / 0.25; EF 25 / 0.50; EF 100 / 1.25 OEL; Fluoreszenz 40 / 0.75; Fluoreszenz 63 / 1.30 OEL. Leitz 301-180 power supply for fluorescence. Fluorescence filters: Blue Ex 490 nm / Em 515 mn; Green 520 nm / Em 630 nm. XY coaxial platform. Transmitted lighting White lighting with halogen lamp 6V 20 W. Fluorescent lighting with mercury lamp HBO 100W.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don&rsquo;t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what&rsquo;s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R &ndash; resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR &ndash; infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C &ndash; capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).