Zeiss Primo Plan-Achromat 40x/0.65 415500-1602-001 Microscope Objective

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Zeis Axioplan, HBO 100W/2 Microscope Light Source w/2 For Microscope HBO 100 w/2

Prior PX042 Compound Microscope With Four Objectives Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in good cosmetic condition and in full working order. This microscope features: Four-position turret with the following objectives: E Plan 4 x / 0.10 -0.17E Plan 10 x Ph / 0.25 -0.17E Plan 40 x Ph / 0.65 -0.17E Plan 100 x Ph / 1.25 oil -0.17 Eyepieces: 2 x WF 10x/22

Zeiss Axioskop FS Fluorescence Microscope w/ 5 x Objectives This was removed from a university lab  (more)where it was surplus to requirements. The product has not been tested due to the absence of its power supply, but it is in good condition with minimal signs of wear. Due to the power supply not being included, we are unable to test further. Includes the following untested objectives; Gallenkamp 160/0.17 100 1.25 oil Zeiss Achroplan 10x/0,25 ∞/- Zeiss Epiplan 50x/0,50 44 28 50 Zeiss LD Achroplan 32x/0,40 PH2 ∞/1,5 Zeiss Achrostigmat 5x/0,12 44 01 20

This Olympus Fluoview FV1000 System was removed from a university lab where it was surplus to requir (more)ements. Included are; 1x Olympus FluoviewModel FV1000 The unit is in good cosmetic condition, but the power cables were missing so it has not been tested. The included PC powers up and has Olympus FV10-ASW Version 01.06.00.13 installed. 1x Olympus Transmitted Light Detector:Model FV10-TDThe unit is in good cosmetic condition. 1x Olympus Control Box:Model IX2 UCBThe unit powers on and is in good cosmetic condition. 1x Olympus Power Supply:Model FV10-PSUThe unit powers on and is in good cosmetic condition. 1x FV10-PSU Key:Model 1201 The unit is in good cosmetic condition. 1x Olympus Hand-switch:Model U-HSTR2The item powers on and is in a reasonable, used cosmetic condition. 1x Olympus Laser Diode Interface Controller:Model FV10-LDIFThe unit is in good cosmetic condition. The PSU is missing. 1x Olympus Power Supply:Model U-RFL-T200Life Time: 3667 hoursThe unit powers on and is in good cosmetic condition. It is not known if the Burner has been replaced after 200 hours. 1x Olympus Mercury Light Source:Model U-LH100GThe unit powers on and is in good cosmetic condition. The Lamp is working. 1x Olympus Light Source StandModel FV10-FIRThe unit is in good cosmetic condition. There are some scuffs and scratches from general use. 1x Olympus Power Supply:Model FV5-LDPSURunning hours: 79335.3 The unit powers on and is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units. 1x FV5-LDPSU Olympus Power Supply Key:Model 1201The unit is snapped. However, FV10-PSU key is the same model and fits the barrel of the FV5-LDPSU Olympus power supply. 1x Olympus Laser HeadModel LD405The unit is in good cosmetic condition.I was unable to connect the head to the power supply as there is no cable that comes with the two units, I could not test whether the laser head is responsive to the power supply. 1x IW-R3000N Rack Mountable Server ChassisThe unit powers on and is in good cosmetic condition. Accessories: 1x Olympus objective correction capModel CAP-G0.5 ± 0.5The unit is in good cosmetic condition 1x Olympus Laser safety shutterModel F10-SHAUXThe unit is in good cosmetic condition. 1x Olympus Goose neck fibre optic light pipesModel LGS3F1200UVThe unit is in good cosmetic condition. Spacers: 2x L3cm xW3cm xH0.5cm 2x L4cm x W4cm x H0.5cm The units are in good cosmetic condition. Misc Accessories: 1x IW-R3000N Rack Mountable Server Chassis User manual V2.11x Microsoft Windows 2000 XP professional Inst/uninst CD1x Belkin Serial Adaptor 1x RCA Phono male to male cable (sealed)1x SATA Cable (C13214-001 FOXCON 0550)1x 9 PIN S -Video to 3 RCA RGB TV HDTV adaptor cable 1x ATX 4 Pin Male to 8 Pin Female EPS power cable cord adaptor1x RCA Female to mini DIN 8-PIN connector (sealed)1x VGA to DVI connector (sealed) Installation discs:2x Belkin USB Adaptor Installation1x Intel Express installer1x Sapphire installation driver 1x mini disc

The OHAUS Explorer Analytical Balance Series combines innovative functionality and design elements t (more)o deliver unparalleled functionality in a line of high performance balances that is unique on the market. These are intelligent and intuitive balances, complemented by a series of innovative features that simplify even the most complex laboratory measurements. The Explorer series includes three high-capacity precision models with capacities up to 35 kg. Same functions as all other Explorers, such as AutoCal™ and 1 second stabilization time. - The display can be separated from the base by up to 5 feet (1.5 meters) to fit operational needs in almost any workspace. A 27 foot (9 meter) cable is also available. when additional flexibility is needed. - Die-cast metal base and 377×311mm stainless steel stand base, the Explorer High Capacity is built to withstand everyday use Applications Weighing, Piece Counting, Percent Weighing, Check Weighing, Animal / Dynamic Weighing, Filling, Totalization / Statistics, Formulation, Differential Weighing, Density Determination, Peak Hold, Ingredient Costing, Pipette Adjustment, SQC, Statistics Screen 5.7 '' (145 mm) color VGA graphic touchscreen display with user-controlled brightness Operation AC adapter (included) Communication RS232 and USB (included) or second RS232 / Ethernet (accessories sold separately). GLP / GMP data output with real time clock. Construction Metal base, ABS top housing, stainless steel deck, front illuminated level indicator, weigh below hook, safety bracket , calibration lock, 4 touchless sensors, coverage in use Characteristics of the project Selectable environmental filters, auto tare, user selectable range calibration points, software lock and reset menu, user selectable communication settings and data print options, user definable project and user ID, standby automatic, up to 14 operating languages For further information and technical characteristics, download the attached data sheet.

This VWR Incu-Line Incubator was removed from a university lab where it was surplus to requirements. (more) The unit powers up and works, but the door mechanism is broken, and the door will not remain closed. It is sold for spares/repairs.

VACUUBRAND VACUU-VIEW Extended Vacuum Gauge Upper Measuring Limit 1100 mbar/hPa (825 torr) Lower Me (more)asuring Limit 1 x 10-3 mbar/hPa (1 x 10-3 torr) Vacuum Sensors Integrated Features - Precision and chemical resistance in an exceptionally wide range from atmosphere down to 10-3 mbar, one gauge only for both rough and fine vacuum - Compact design with integrated sensors for useful setup in laboratory and process - The chemical resistant combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures a long product life even with aggressive chemicals - Illuminated display, easy to read - Display with menu driven handling, easy to use e.g. for unit settings For the monitoring of your vacuum processes in the rough and fine vacuum range, the new vacuum gauges VACUU·VIEW extended are perfect! The heavy duty combination of ceramic diaphragm sensor and ceramic jacketed Pirani sensor ensures reliable readings in the wide range from atmosphere down to 10-3 mbar.INCLUDED: The VACUUBRAND VACUU-VIEW Extended Vacuum Gauge includes: - Kit Hose Nozzle DN 6/10 mm - Power Supply - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

High precision measurements The 10 g class E2 mass standard is a precision metrology tool, ideal for (more) calibrating high-precision balances used in metrology, pharmaceutical, chemical laboratories and other research and industrial institutions. Product Features The ergonomic, cylindrical shape ensures ease of use and precise placement of the standard on the weighing platforms. Made from the best materials, it guarantees stability and resistance to changes in environmental conditions.

Scilogex D160 Homogenizer Package - Drive Motor DS-160/10 The Scilogex D160 Homogenizer can rapidly  (more)homogenize, disperse, and emulsify samples from 0.1-250ml solids or liquid media depending on the generating probe. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 30,000rpm. The material is repeatedly cycled through narrow slits in the probe where it is rapidly sheared and disintegrated by high shear. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in a few seconds. Little, if any, heat is produced during the process. Package includes: Drive motor- DS-160/10, 10mm diameter generator, flat head open slot, 115mm immerse length, H-370 stand. INCLUDED: The Scilogex D160 Homogenizer Package - Drive Motor DS-160/10 includes: - H-370 Stand - D160 Drive Motor - 10mm Dia. Generator Probe - 115mm Generator Shaft - Holding Clamp - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty