Zeiss Axiovert 25 Inverted Microscope w/ 3 x Achrostigmat Objectives 10/20/40x

Zeiss Axioplan 2 Microscope + LSM 510 Laser Scanning System This system was removed from a universit (more)y lab where it was surplus to requirements. The microscope is in working order, but we have not tested the laser due to safety restrictions at our site. There are no objectives fitted. Items included are: -Zeiss LSM Control S/N- 000260-Hal 100 Lamp -Lasos Lasertechnic GMBH S/N- 04041136 M/N- 9600-07-Zeiss HBO 100W-Zeiss HBO 100W/2-Zeiss Lasermodul UV-Fujitsu Siemans mouse-Relevant manuals and guides-Connection cables-Comms PCi Cards & Dongle (non USB)

This Leica TCS SP 2 Confocal Microscope System was removed from a university lab due to a fault. The (more) university reported "Apparently it was a computer issue, in that the computer failed and would no longer talk to the confocal and nothing could be done to remedy the issue since Leica wont support it, I’m told the actual microscope and lasers are fine (if old!)" From our assessment, the microscope appears to be fully working and it could be split from the main system and used on its own. The controllers etc for the automated stage also appeared to work fine. It is just the AOBS head and control system that doesn't want to communicate with the PC. The system has been fully connected up at our facility. We have replaced the PCi card but that did not generate any success either. When starting the Leica PC program it shows the following message: "AOBS Crystal Ctrl (2)" reports 0 unlocked PLL channel(s)! Please lock channel(s) or reset controller. The AOBS is the scanner head which is attached to the main control desk. We have also tried the system with another identical head that we have in stock. That gave us exactly the same result. It is sold for spares/repairs. Please note that the marble table in the photos was retained by the lab.

This listing is for a Zeiss Axioskop EL-Einsatz 5 Objectives Microscope. The unit is in full workin (more)g condition and is ready for immediate release. Objective Lenses supplied: Plan 100/1.25 Plan 40X/0.66 Plan 20x/0.40 Achroplan 10x/0.25 SPL10/0.25 Zeiss Axioskop EL-Einsatz 5 Microscope Overview The Zeiss Axioskop EL-Einsatz 5 microscope is a sophisticated instrument designed for advanced microscopy tasks, particularly in research and clinical settings. Its range of objective lenses and features supports high-quality imaging and user-friendly operation. Key Features: Water Immersion: These objective lenses are designed for application in physiological salt solutions, making them perfect for examining thick biological specimens, such as brain sections. High Numerical Aperture (NA): The lenses feature high NA values (e.g., 0.80 for the 50x lens), enhancing light-gathering capability and image resolution, especially beneficial for fluorescence microscopy. Fluorescence Capabilities: The Axioskop EL-Einsatz 5 can capture fluorescent images across four channels. The system automatically adjusts brightness and white balance, simplifying the imaging process. Ergonomic Design: With an adjustable ergotube, users can comfortably position the eyepieces for extended use. Essential controls are conveniently located for ease of access. Smart Microscopy: The microscope is built for efficiency, featuring automatic adjustments that minimize the need for manual intervention, streamlining workflow. Applications: The Zeiss Axioskop EL-Einsatz 5 is suitable for a variety of applications, including: Materials Science and Metallography: Ideal for examining the microstructure of materials and conducting failure analysis. Physiology and Electrophysiology: Great for observing living cells and tissues, understanding physiological processes in real-time. Biomedical Research and Clinical Diagnostics: Useful for analysing biological samples, including histological sections and cultured cells, contributing to disease research and diagnostics. Microscopy Tasks Requiring Advanced Imaging Capabilities: Perfect for researchers needing high-resolution images and automation in their microscopy tasks.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Head: Binocular Eyepieces: 10x Working Distance: 92mm Zoom Range: 0.8x – 3.2x Total magnification: 8 (more)x – 32x Equipped with a KL 200 illumination source

This Boxer 200/100 L Laboratory Autoclave was removed from a university lab where it was surplus to  (more)requirements. The client had informed us that the unit is in 100% working order and has had little use. It has now been professionally serviced and has been confirmed to be in full working order. It has passed all safety checks. Full report available on request. The internal chamber is 39cm (L)x 59cm (W)x 39cm (H). The unit is in very good condition with very few marks.

This listing is for a Sony UP-D895 Digital Graphic Printer. The unit is in full working condition a (more)nd is ready for immediate release. Sony UP-D895 Digital Graphic Printer The UP-D895 is engineered specifically for medical environments, ensuring high-quality prints of critical imaging studies. Key Features: High-Resolution Printing: Produces sharp and clear images, essential for accurate medical diagnoses, with high detail suitable for radiology. Efficient Printing Technology: Utilizes advanced printing technology that ensures reliable performance, reducing downtime in busy medical facilities. Compact Design: Lightweight and space-saving, making it ideal for crowded radiology departments without compromising on functionality. User-Friendly Interface: Features a front panel with intuitive controls and a jog dial, allowing for easy navigation through menu functions, enhancing operational efficiency. Increased Memory: 10MB memory capacity supports higher throughput, enabling the printer to handle multiple jobs quickly, which is crucial in high-demand environments. “Resize-to-Fit” Feature: This functionality allows for the enlargement of images to fit the desired print size, accommodating various diagnostic needs. Media Compatibility: Compatible with a range of printing media, including UPP-110S, UPP-110HD, and UPP-110HG papers, offering flexibility based on imaging requirements. Ideal Applications: Medical Imaging: Specifically designed for printing X-rays, MRIs, and CT scans, ensuring that medical professionals can review images with high clarity. Radiology Departments: Perfect for use in hospitals and clinics where quick and reliable printing of diagnostic images is essential for patient care.

Camspec M508 Spectrophotometer This item was removed from a university laboratory where it was surpl (more)us to requirements. It powers on and is in good cosmetic condition. We are unable to test it further at our facility. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Ohaus EX12001 Explorer Precision High Capacity Balance, 12000, 0.1 g Maximum Capacity 12,000 g Reada (more)bility 0.1 g Repeatability (Typical) ±0.1 g Features - High-performance precision balance with a capacity of 12,000 and default readability of 0.1 g - Large 5.7" full-color VGA touchscreen display for intuitive navigation and control - AutoCal™ automatic internal calibration ensures consistent accuracy over time - Fast stabilization times and enhanced vibration filtering for precise measurements - Metal base with ABS top housing and stainless steel pan for durability - Four programmable touchless sensors for hands-free operation - RS232 and USB communication ports included, with optional second RS232 or Ethernet connectivity The OHAUS Explorer Balance Series offers a blend of advanced features and modern design, providing unmatched functionality for laboratory and industrial applications. With capacities ranging up to 35kg and readabilities from 0.1mg to 0.1g, these balances cater to a wide range of precision weighing needs. Key features include the AutoCal™ automatic internal calibration system, ensuring daily accuracy without the need for external weights, and a large color touchscreen that simplifies operation through an intuitive interface.Many explorer balances are designed for versatility, featuring up to 14 application modes and multiple connectivity options such as RS-232, USB, and optional Ethernet. The modular design allows for flexible workspace integration, and select models include a frameless draftshield with motorized side doors, operated via programmable touchless sensors for hands-free efficiency. AD models offer automatic door functions, enhancing convenience, while N models are NTEP certified, ensuring compliance with strict readability and repeatability standards. D models feature dynamic capacity ranges, making them adaptable for various weighing tasks.Durable construction with a metal base, stainless steel pan, and integrated weigh-below hook ensures long-lasting performance. The Explorer series also supports advanced user management, data logging, and security features, making it ideal for regulated environments. Whether for basic weighing, parts counting, or more complex measurements, the OHAUS Explorer Balance Series delivers precision, reliability, and ease of use, setting a new standard in high-performance balances. Click Here to View Product Video INCLUDED: The Ohaus EX12001 Explorer Precision High Capacity Balance, 12000, 0.1 g includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

COMBISTORAGE 60 FIRE TYPE 90 CERTIFIED SAFETY CABINET - CHEMISAFE General features: - Completely mad (more)e of 1 -1.5 mm thick galvanized steel sheet, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the room temperature exceeds 50 °C - 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with fire dampers which close the ducts when the temperature is higher than 70 °C according to DIN 4102-6 - Preparation for ventilation through a Ø 100 mm flange for an external connection or a filtration ventilation system (see chapter on ventilation) - Closing and locking system that allows to keep the cabinet doors open and to close them automatically in case of ambient temperature above 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Grounded - Adjustable leveling feet - Lock and key - Height-adjustable shelves in painted or stainless steel - Shelf fixed with aluminum pins, excluding all risks of sparks - Fire resistant shelves - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470 and EN16121 standards - DOOR OPENING TO THE LEFT, opening with door to the right on request INTERNAL COMPARTMENTS for the storage of various families of chemicals: - Separation by means of 18 mm thick HPL panels covered with thermo-expanding gaskets (possibility of having up to 3 compartments and customization compartments - do not hesitate to contact us) Supplied: - COMPARTMENT FOR FLAMMABLES: 1 painted steel shelf + 1 retention tank with grid - ACID/BASE COMPARTMENT: 3 plastic-coated steel shelves (max load 60 Kg evenly distributed) Optional: - Shelves - Visual and acoustic alarm - Timer - Fire extinguisher - Electric aspirator - Activated carbon filter - Molecular suction system

Quality, reliable and affordable incubators. Additional technical features: - Powerful and fast refr (more)igeration system - Working temperature from 0°C to 100°C - External structure in oven-painted steel sheet - with antacid epoxy powder - Forced ventilation - Internal chamber completely in stainless steel - Second door in tempered glass - Display resolution 0.1 - RS-485 output - Data management software, cable and USB adapter as standard - Sterilization cycle (160°C for 2.5 hours) Uniformity of temperatures: - at 4°C: 0.7°C - at 37°C: 0.5°C - at 60°C: 1.0°C Temperature stability at: - at 37°C: 0.2°C Time to reach temperature: - at 37°C: 5 minutes - at 44°C: 6 minutes - at 60°C: 6 minutes Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Internal door in tempered glass