Zeiss Axiophot Microscope w/ 5 x Zeiss Plan-NEOFLUAR Objectives Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Zoom ratio 8.5:1 Focussing range 50 mm Headpiece 45° inclined, interpupillary distance 50 – 76 mm Di (more)stortion free objective, 1X: N.A. 0.084, W.D. 81 mm Widefield eyepiece, high eyepoint, F.N. 24, diopter lock mechanism, build in double cross line Transparent stage plate Illumination mode: high contrast, low contrast and oblique illumination Illumination area Ø 40 mm

Nanometrics Nanospec/AFT Microarea Gauge 010-0180 Lab This system was removed from a university engi (more)neering department as surplus to requirements. This system powers on and is in a reasonably good cosmetic condition, unable to test it further at our facility. System includes: Nanometrics CTS-102 Film Thickness Computer/power supplyM/N: CTS 102-7200-0536-01S/N: 1282-2-00549 1x Nanometrics PrinterM/N: 6420-19107S/N: 53892536 1x Olympus BH Base 1x Olympus BHM Stage 2x American Optical 10xWF Eyepiece 1x Olympus 5 Piece Nose Piece with 3 Objective Lenses: - 1x Olympus M10 0.25P/N: 412650 1x Olympus MPlan 100 0.90P/N: 402546 1x Olympus MPlan 40 0.63P/N: 405434

Zeiss LSM 510 Meta High Resolution Confocal Microscope System This was removed from a university lab (more) where it was surplus to requirements. The units are all generally in reasonably good used cosmetic condition. All parts do power up individually but we could not get the system to run. We believe there should be a PC containing software that we do not have. The lab believed it was suitable to sell only for spares/repairs. The system consists of: 1 x Zeiss Axioskop 2 FS mot Microscope (452314)Fitted with:1 x Zeiss LSM 510 Meta VIS/NLO 1305-590 Scan Head. 1 x Zeiss 1320-560 Fitted with:1 x HBO 100 Lamp1 x Zeiss NDD2 1104867 Detection Module.1 Zeiss NDD3 1104-867 Detection module. 1 x Zeiss 1269-455 Switching Mirror, Fitted with:1 x HAL 100 Lamp1 x Zeiss 1058-431 Transmitted Light Channel LSM/Pascal. The following filter cubes are fitted: 1 - None2 - FITC3 - unreadable4 - DAPI5 - NDD The following objectives are fitted: 1 x Zeiss W Plan-APOCHROMAT421462-990040x/1.0 DIC VIS-IR∞/0 1 x Zeiss 44 00 39ACHROPLAN10x/0,30w Ph1∞/0 2 x Carl Zeiss W-Pl 10x/23 1016-758 Eyepieces. 1 x Zeiss Laser Module RGB 1373-790.Unit appears to be dated Nov 07. 1 x Zeiss Remote LSM 510 R3.5/LSM LIVE 1260-157. 1 X LUIGS & NEUMANN Microscope Remote. 1 x Carl Zeiss 1128-574 SNT 12V 100W Power Supply. 1 x HBO 100 Power Supply. 1 x Carl Zeiss 1298-260 Safety Box. 1 x LASERMODUL NIR. 1 x Carl Zeiss RT-PC 2720.Not sure if this is a spare for the one inside the LSM unit?It does power up and run. The white bench is not included.

Motic GM-171 Trinocular Gemology Stereo Microscope Magnification Range 7.5X to 50X Observation Tube  (more)Trinocular Head Optical System Greenough Features - Trinocular head with 45° inclination and fixed 50:50 light split - Adjustable interpupillary distance (52-75mm) for comfortable viewing - Diopter adjustment on both eyepieces (+/- 5 diopter) for personalized focus - Widefield WF10X/23mm eyepieces providing a large field of view - Adjustable iris diaphragm with an aperture range of Ø41mm to Ø2mm - Coarse focusing system with tension adjustment and a 125mm focusing stroke - Includes specialized gemology tilting base for precise sample positioning The Motic GM-171 Trinocular Stereo Microscope is expertly designed for gemological and precious mineral work, providing a magnification range of 7.5X to 50X. Utilizing a Greenough optical system, it offers superior clarity and depth, making it ideal for detailed analysis. The trinocular head is inclined at 45° for ergonomic viewing, and the fixed 50:50 light split allows for precise imaging. Its adjustable interpupillary distance (52-75mm) and diopter adjustment (+/- 5 diopter) on both eyepieces ensure a comfortable and customizable viewing experience. The widefield WF10X/23mm eyepieces also deliver a broad field of view for a comprehensive look at samples. This microscope features a 6.7:1 zoom system with objectives ranging from 0.75X to 5X and a working distance of 110mm, offering flexibility in handling samples. The 360° rotatable base and tiltable stand allow for easy adjustments to viewing angles, while the adjustable iris diaphragm (Ø41mm - Ø2mm) offers precise control over illumination. Incident illumination is provided by a 7W fluorescent light with a gooseneck for adjustability, while transmitted illumination comes from a 6V/30W Quartz Halogen lamp with intensity control and a darkfield illuminator. Complete with a dust cover, stainless steel wire stone holder, and an aluminum carrying case, the Motic GM-171 is a comprehensive tool for professionals in gemology. INCLUDED: The Motic GM-171 Trinocular Gemology Stereo Microscope includes: - 45° Trinocular Stereomicroscope Head - 45 Degree Binocular Stereomicroscope Head - Gemology Tilting Base - Wire Gem Holder - Aluminum Carrying Case - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

This Nikon Eclipse TE200 Inverted Microscope was removed from a university lab where it was surplus  (more)to requirements. It is in good cosmetic condition and powers on. We tested the top-mounted lamp with an in-house PSU, which is in good working order. (PSU not included) The bottom-mounted lamp has not been tested. The filter section seems to be experiencing a problem at position 1. There is an obstruction affecting the image, and despite our examination, we were unable to identify the cause of the issue. Additionally, one of the coloured filters appears to be damaged, although it does not seem to impact the image quality. No further testing has been conducted, as it does not include objectives to do so. Includes the following; 2 x Nikon CFI 10x/22 Eyepiece It is sold for spares/repairs

If you buy a High Resolution Scale PUE 7.1 by July 31, 2024, you will receive each of these products (more) along with a FREE lifetime license for the Workflow Module. High Resolution Scale The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2000 kg, with a repeatability of 3 g guaranteed. 9 advantages, 1 monobloc The ability to weigh loads up to 150 kg on a large pan with high readability and good repeatability, minimal eccentricity error over the entire range, fast and stable measurement (achievable within 1 second), stability of parameters over time and after transport, and a pan dimension adapted to the scale’s readability – all this is the result of using a measurement system based on improved technology. Repeatability not repeatable by others Automatic adjustment with an internal weight not only guarantees the best quality of work and repeatability of results, but also saves time and provides comfort. The HRP high resolution scales feature a cutting-edge measuring system based on RADWAG MonoBLOCK® technology. It allows working with a readability of 1 g at a maximum capacity of 300 kg and 20 g at a maximum capacity of 2 000 kg, with a repeatability of 3 g guaranteed. For such industries as pharmaceutical, chemical, food and… HRP scales are ideal for industrial conditions where high readability and repeatability of measurement are required, such as in the pharmaceutical, chemical and food industries. Choose a terminal HRP high-resolution scales can work with one of two industrial terminals: PUE 7.1 and PUE HY10. The PUE 7.1 terminal has: 5.7-inch color resistive display a touch-sensitive keyboard ABS plastic housing IP 43 protection rating communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, Wi-Fi®, optional additional modules: additional A/D converter module DP6. The PUE HY10 terminal features: 10.1-inch color graphic display touchscreen keyboard stainless steel housing IP 68/69 degree of protection communication interfaces: 2xRS232, 2xUSB-A, Ethernet, 4 IN/ 4 OUT, optional additional modules: Wi-Fi®, RS485, Profibus, Profinet, analog output module, 12 IN/ 12 OUT. The power of steel The use of stainless steel for weighing pan construction guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the HRP high-resolution scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Use the potential Barcode scanners, receipt printers, label printers or additional displays – thanks to multipurpose software, PUE 7.1 scale can work with all of them. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Not just weighing But also parts counting, checkweighing, percent weighing, animal weighing, formulations, differential weighing, labelling, peak hold and statistics. The power of PUE 7.1’s working mods.

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Varied Standards: The set consists of 12 flat polygonal sheets and 8 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 pairs of tweezers, 1 brush and 1 pair of gloves, facilitating precise and safe cleaning and handling of the standards. Plastic Packaging: The weights are delivered in a durable plastic case, ensuring their safe storage and transport. *The mg unit mass standards are flat polygonal sheets. **The 1 mg, 2 mg and 5 mg mass standards are made of aluminum.