Optika Inverted Microscope Model XDS-2 w/ 4 x Objectives Ph 4x 10x 20x 40x Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Progressive scan type 2/3″ CCD, super-high-resolution with 1.4 million pixels (1280×1024) 5.1 cm pol (more)ysilicone TFT display for frame and focus adjustment in preview mode Camera control with handswitch, avoids vibrations of camera head and guarantees sharp images Photometric system with integral (30%) and spot (1%) metering possibility Automatic exposure adjustment with auto-exposure lock +/- 3 step compensation JPEG image format with three resolution modes 3.3 V SmartMedia (SSFDC) with 8 MB intermediate image storage without PC Direct printing to Olympus P-330E high resolution dye-sublimation printer (306 dpi) Camera control with personal computer via serial interface

This Zeiss Axiophot Microscope w/ 5 x Zeiss Plan-NEOFLUAR Objectives was removed from a university l (more)ab where it was surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The microscope has been professionally serviced and is in full working order. The report is available on request. The fluorescence bulb was removed due to unknown lifespan. The system consists of: 1 x Zeiss Axiophot Microscope body.2 x Zeiss 45 60 70 03 Cameras.1 x Zeiss 44 64 21 3FL Fluorescence Cube Slider.1 x Zeiss 45 36 70 Ph Slider.1 x Zeiss 45 35 02 Mechanical Stage.1 x Zeiss 44 53 67 + 44 53 25 Condensor.1 x Zeiss 44 72 16 Lamp With 1 x Zeiss 39 26 42 Power Supply (Showing 06254.34 Run Hours).1 x Zeiss 44 72 17 Lamp. It also has 5 x Objectives: 1 x ZEISSPlan-NEOFLUAR63x/1,25 Oil44 04 61Ph3∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR40x/0,7544 03 51Ph2∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR20x/0,5044 03 41Ph2∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR10x/0,3044 03 31Ph1∞/0,17 1 x ZEISS WEST GERMANYPlan-NEOFLUAR5x/0,1544 03 20∞/0,17 And 2 x Zeiss Pl 10x/25 Eyepieces.

Zeiss Axio Vert.A1 FL Inverted Microscope This system was removed from a university lab where it was (more) surplus to requirements. The microscope is in very clean cosmetic condition. Four 27mm to RMS adapters have been fitted, allowing the use of standard RMS objectives. The microscope has been tested with an objective from stock and works as expected, though no objectives are currently fitted. The instrument is configured as follows: - 1 x Microscope stand Axio Vert.A1 FL (431030-9010-000) - Nosepiece 2xH / 3xHDIC M27 and carrier for transmitted-light illumination - Reflector modules: DAPI, FITC, TRITC, empty - 1 x LD condenser 0.55 for H Ph PlasDIC DIC (424228-9030-000) - Position 1: empty - Position 2: 424228-9060 0.05T Neutral density filter 0.05 - Position 3: 426717-9170 Ph1/0.55 Phase stop Ph1/0.55 - Position 4: 426717-9180 Ph2/0.55 Phase stop Ph2/0.55 - Position 5: empty - 1 x Illuminator LED for Axio Vert transmitted light (423004-9020-000) - 1 x Stop slider A 14x40mm with aperture/luminous field diaphragm (423730-9151-000) - 1 x Binocular tube 45º/23 (425523-9000-000) with 2 x 444036-9000 eyepieces PI 10x/23 - 1 x Mirror 100%, 26x36mm (452531-0001-010) with intermediate phototube H=50mm, left port (425146-9030-000) - 1 x Camera adapter 60N-C 2/3" 0.5x (426112) - 1 x Ergo Intermediate piece H=50mm for optimization of viewing height (425146-9040-00) - 1 x Specimen stage 232x230mm with hardcoat anodized surface (432037-9000-000) - Object guide M, 130x85mm, for Axio Vert (432333-9040-000) - 1 x QImaging QIClick Camera (01-QIClick-R-F-CLR-12), Colour 12 Bit, Firewire operation

This listing is for a Stuart UC152 Hotplate StirrerGeneral purpose, reliable stirrer/hotplates with  (more)compact 150X150mm top plate. These units have microprocessor control of temperature allowing a calibrated scale to be printed around the control dial in °C. With a choice of robust aluminium or chemically resistant ceramic tops and advanced saftey features: Flashing 'hot' warning light to warm when top plate is too hot to touch. Spillproof design to deflect spills away from the controls abd the user. Independent saftey circuit to protect against overheating. Microprocessor control for accurate temperature setting. The 'hot' warning light will flash whenever the plate temperature is above 50°C and will operate even when the hotplate is turned off and connected to the mains. Powerful magnets and motor give stirring speeds up to 2000rpm and is capable of mixing large volumes (up to 15 litres). Model UC152 has a glass ceramic top which has excellent chemical resistance and allows high plate temperatures for faster heating. Max temp: 450°C

Attainable Vacuum: -333 mbar Free Air Displacement: 40 l/min Life Expectancy: 10.000 h Inlet: 15mm O (more).D. hose nipple Outlet: ISO Rc 1/4 female threaded Duty Cycle: Continuous Coil Insulation Class: E or its equivalent (JETL) and B for UL-1450 Dimensions (w x d x h): 175mm x 118mm x 138mm Gross Weight:   3.0 kg 230V / 50-60Hz / 60W

Cell size (WxLxH): 92 x 255 x 56 mm Gel tray sizes (WxL): 70 x 70 mm Sample throughput: 8-30 Base bu (more)ffer volume: ~270 ml Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

Beckman Coulter Biomek NXp Automated Liquid Handler with PC & Software Lab This was removed from (more) a university lab where it was surplus to requirements. The unit is in reasonable cosmetic condition. It does have various marks and signs of general use.The robot is able to be 'homed' fine and it responds to commands via manual control. The Tiploader also works as it should. This and the gripper require an air compressor which is not included. We used one from stock to test it. The system consists of: 1 x Beckman Coulter Biomek NXp Robot.s/n A318410173.Cat No A31841.96 Well head. 1 x Beckman Coulter Tiploader. 1 x Beckman Coulter AccuFrame. 1 x Microscan MS-3 Laser (Barcode Reader) 1 x Dell Optiplex 380 PC with monitor, keyboard & mouse.This PC is fitted with the HDD from the original Lenovo PC. The PC has the Biomek NX software installed. Version 3.3 build 14.

MARSHALL Select MS-OT20LE Overhead Stirrer, 20L Maximum Stirring Quantity 20L Speed Range 50 to 2,2 (more)00 RPM Maximum Viscosity 100,000 mPas Features - High torque of 40 Ncm suitable for viscous medium stirring - Brushless DC motor ensures long life, maintenance-free operation, and safety in explosive environments - LED display for precise monitoring of actual speed - Over torque protection and safety circuits provide safe stop functions in anti-stall or overload conditions - Large chuck diameter supports many shaft types, increasing versatility - Through-shaft design allows for easy adjustment of the impeller position - Automatic resumption of stirring at preset speed after power loss - IP21 protection class offers basic protection against solid objects and dripping water - Analog speed controls displayed on the LED for easy adjustments and monitoring - Designed to accept pass-through stirrer rods for flexible setup options - Visual alarm alerts for immediate notification of system issues or malfunctions - Explosion-proof motor enhances safety in volatile environments The MARSHALL Select MS-OT20LE Overhead Stirrer stands out for its high reliability and superior performance, engineered to manage stirring tasks up to 20L. It features a versatile speed range from 50 to 2,200 RPM, suited for a wide variety of laboratory needs. This stirrer is equipped with a brushless DC motor, renowned for its long life, maintenance-free operation, and explosion-proof qualities. The MS-OT20LE includes an LED screen that displays the actual speed, ensuring precise control over your mixing processes. It's capable of handling high viscosities up to 100,000 mPas with a maximum torque of 40 Ncm, making it ideal for stirring viscous mediums. The large chuck diameter supports many shaft types, enhancing its adaptability. Safety is a paramount feature of this device, with integrated circuits that provide a safe stop function in conditions of anti-stall or overload, where over torque protection automatically stops the motor. Additionally, the through-shaft design allows for easy adjustment of the impeller position to suit varying laboratory needs. In the event of a power outage, the stirrer automatically resumes operation at the preset speed once power is restored, ensuring continuity and efficiency. The IP21 protection class provides basic protection against solid objects and dripping water, further securing the unit in active laboratory environments. INCLUDED: The MARSHALL Select MS-OT20LE Overhead Stirrer, 20L includes: - Key of Drill Chuck - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).